[PATCH v2 0/7] imx-drm: ipuv3-crtc: Implement mode_fixup

[Philipp Zabel]

Am Freitag, den 23.01.2015, 13:06 -0200 schrieb Fabio Estevam:
> On Fri, Jan 23, 2015 at 12:56 AM, Liu Ying <Ying.Liu at freescale.com> wrote:
> > Hi,
> >
> > It looks that the below commit makes my Hannstar XGA LVDS panel stop working
> > on the i.MX6DL SabreSD board.  Any idea?
> 
> Yes, with eb10d6355532def3a ("mx-drm: encoder prepare/mode_set must
> use adjusted mode") applied
> the DI clock is 0:

My bad, the problem is we are misusing encoder_prepare to enable the
display interface clock needed for the following crtc mode set.

What we really want is to use is adjusted_mode given to
encoder_funcs->mode_set, before the clock is enabled by
crtc_funcs->commit.

How about this patch:

-----8<-----
diff --git a/drivers/gpu/drm/imx/imx-ldb.c b/drivers/gpu/drm/imx/imx-ldb.c
index abceb3d..99fe4bb 100644
--- a/drivers/gpu/drm/imx/imx-ldb.c
+++ b/drivers/gpu/drm/imx/imx-ldb.c
@@ -193,22 +193,8 @@ static void imx_ldb_encoder_prepare(struct drm_encoder *encoder)
 {
 	struct imx_ldb_channel *imx_ldb_ch = enc_to_imx_ldb_ch(encoder);
 	struct imx_ldb *ldb = imx_ldb_ch->ldb;
-	struct drm_display_mode *mode = &encoder->crtc->hwmode;
 	u32 pixel_fmt;
-	unsigned long serial_clk;
-	unsigned long di_clk = mode->clock * 1000;
-	int mux = imx_ldb_get_mux_id(imx_ldb_ch);
 
-	if (ldb->ldb_ctrl & LDB_SPLIT_MODE_EN) {
-		/* dual channel LVDS mode */
-		serial_clk = 3500UL * mode->clock;
-		imx_ldb_set_clock(ldb, mux, 0, serial_clk, di_clk);
-		imx_ldb_set_clock(ldb, mux, 1, serial_clk, di_clk);
-	} else {
-		serial_clk = 7000UL * mode->clock;
-		imx_ldb_set_clock(ldb, mux, imx_ldb_ch->chno, serial_clk,
-				di_clk);
-	}
 
 	switch (imx_ldb_ch->chno) {
 	case 0:
@@ -281,6 +267,9 @@ static void imx_ldb_encoder_mode_set(struct drm_encoder *encoder,
 	struct imx_ldb_channel *imx_ldb_ch = enc_to_imx_ldb_ch(encoder);
 	struct imx_ldb *ldb = imx_ldb_ch->ldb;
 	int dual = ldb->ldb_ctrl & LDB_SPLIT_MODE_EN;
+	unsigned long serial_clk;
+	unsigned long di_clk = mode->clock * 1000;
+	int mux = imx_ldb_get_mux_id(imx_ldb_ch);
 
 	if (mode->clock > 170000) {
 		dev_warn(ldb->dev,
@@ -291,6 +280,16 @@ static void imx_ldb_encoder_mode_set(struct drm_encoder *encoder,
 			 "%s: mode exceeds 85 MHz pixel clock\n", __func__);
 	}
 
+	if (dual) {
+		serial_clk = 3500UL * mode->clock;
+		imx_ldb_set_clock(ldb, mux, 0, serial_clk, di_clk);
+		imx_ldb_set_clock(ldb, mux, 1, serial_clk, di_clk);
+	} else {
+		serial_clk = 7000UL * mode->clock;
+		imx_ldb_set_clock(ldb, mux, imx_ldb_ch->chno, serial_clk,
+				  di_clk);
+	}
+
 	/* FIXME - assumes straight connections DI0 --> CH0, DI1 --> CH1 */
 	if (imx_ldb_ch == &ldb->channel[0]) {
 		if (mode->flags & DRM_MODE_FLAG_NVSYNC)
-- 
2.1.4
----->8-----

regards
Philipp