[RFC v2 3/7] cec: add new framework for cec support.

[Sean Young]

On Thu, Jan 22, 2015 at 05:04:35PM +0100, Kamil Debski wrote:
> Add the CEC framework.
-snip-
> +Remote control handling
> +-----------------------
> +
> +The CEC framework provides two ways of handling the key messages of remote
> +control. In the first case, the CEC framework will handle these messages and
> +provide the keypressed via the RC framework. In the second case the messages
> +related to the key down/up events are not parsed by the framework and are
> +passed to the userspace as raw messages.
> +
> +Switching between these modes is done with a special ioctl.
> +
> +#define CEC_G_KEY_PASSTHROUGH	_IOR('a', 10, __u8)
> +#define CEC_S_KEY_PASSTHROUGH	_IOW('a', 11, __u8)
> +#define CEC_KEY_PASSTHROUGH_DISABLE	0
> +#define CEC_KEY_PASSTHROUGH_ENABLE	1

This is ugly. This ioctl stops keypresses from going to rc-core. The cec 
device is still registered with rc-core but no keys will be passed to it. 
This could also be handled by loading an empty keymap; this way the input 
layer will still receive scancodes but no keypresses.

> +static ssize_t cec_read(struct file *filp, char __user *buf,
> +		size_t sz, loff_t *off)
> +{
> +	struct cec_devnode *cecdev = cec_devnode_data(filp);
> +
> +	if (!cec_devnode_is_registered(cecdev))
> +		return -EIO;
> +	return 0;
> +}
> +
> +static ssize_t cec_write(struct file *filp, const char __user *buf,
> +		size_t sz, loff_t *off)
> +{
> +	struct cec_devnode *cecdev = cec_devnode_data(filp);
> +
> +	if (!cec_devnode_is_registered(cecdev))
> +		return -EIO;
> +	return 0;
> +}

Both read and write do nothing; they should either -ENOSYS or the fuctions
should be removed.


Sean