[PATCH 1/9] drm/exynos: add error messages if clks failed to get enabled
Gustavo Padovan
gustavo at padovan.org
Wed Jun 3 07:30:24 PDT 2015
From: Gustavo Padovan <gustavo.padovan at collabora.co.uk>
Check error and call DRM_ERROR if clk_prepare_enable() fails.
Signed-off-by: Gustavo Padovan <gustavo.padovan at collabora.co.uk>
---
drivers/gpu/drm/exynos/exynos7_drm_decon.c | 29 ++++++++++++++++++++++++----
drivers/gpu/drm/exynos/exynos_drm_fimd.c | 14 ++++++++++++--
drivers/gpu/drm/exynos/exynos_mixer.c | 31 +++++++++++++++++++++++++-----
3 files changed, 63 insertions(+), 11 deletions(-)
diff --git a/drivers/gpu/drm/exynos/exynos7_drm_decon.c b/drivers/gpu/drm/exynos/exynos7_drm_decon.c
index d659ba2..ffd7c3b 100644
--- a/drivers/gpu/drm/exynos/exynos7_drm_decon.c
+++ b/drivers/gpu/drm/exynos/exynos7_drm_decon.c
@@ -606,6 +606,7 @@ static void decon_init(struct decon_context *ctx)
static void decon_enable(struct exynos_drm_crtc *crtc)
{
struct decon_context *ctx = crtc->ctx;
+ int ret;
if (!ctx->suspended)
return;
@@ -614,10 +615,30 @@ static void decon_enable(struct exynos_drm_crtc *crtc)
pm_runtime_get_sync(ctx->dev);
- clk_prepare_enable(ctx->pclk);
- clk_prepare_enable(ctx->aclk);
- clk_prepare_enable(ctx->eclk);
- clk_prepare_enable(ctx->vclk);
+ ret = clk_prepare_enable(ctx->pclk);
+ if (ret < 0) {
+ DRM_ERROR("Failed to prepare_enable the pclk [%d]\n", ret);
+ return;
+ goto pclk_err;
+ }
+
+ ret = clk_prepare_enable(ctx->aclk);
+ if (ret < 0) {
+ DRM_ERROR("Failed to prepare_enable the aclk [%d]\n", ret);
+ return;
+ }
+
+ ret = clk_prepare_enable(ctx->eclk);
+ if (ret < 0) {
+ DRM_ERROR("Failed to prepare_enable the eclk [%d]\n", ret);
+ return;
+ }
+
+ ret = clk_prepare_enable(ctx->vclk);
+ if (ret < 0) {
+ DRM_ERROR("Failed to prepare_enable the vclk [%d]\n", ret);
+ return;
+ }
decon_init(ctx);
diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
index 9661853..7c8ba61 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
@@ -808,6 +808,7 @@ static void fimd_apply(struct fimd_context *ctx)
static void fimd_enable(struct exynos_drm_crtc *crtc)
{
struct fimd_context *ctx = crtc->ctx;
+ int ret;
if (!ctx->suspended)
return;
@@ -816,8 +817,17 @@ static void fimd_enable(struct exynos_drm_crtc *crtc)
pm_runtime_get_sync(ctx->dev);
- clk_prepare_enable(ctx->bus_clk);
- clk_prepare_enable(ctx->lcd_clk);
+ ret = clk_prepare_enable(ctx->bus_clk);
+ if (ret < 0) {
+ DRM_ERROR("Failed to prepare_enable the bus clk [%d]\n", ret);
+ return;
+ }
+
+ ret = clk_prepare_enable(ctx->lcd_clk);
+ if (ret < 0) {
+ DRM_ERROR("Failed to prepare_enable the lcd clk [%d]\n", ret);
+ return;
+ }
/* if vblank was enabled status, enable it again. */
if (test_and_clear_bit(0, &ctx->irq_flags))
diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c
index 6bab717..1b77fc7 100644
--- a/drivers/gpu/drm/exynos/exynos_mixer.c
+++ b/drivers/gpu/drm/exynos/exynos_mixer.c
@@ -1031,6 +1031,7 @@ static void mixer_enable(struct exynos_drm_crtc *crtc)
{
struct mixer_context *ctx = crtc->ctx;
struct mixer_resources *res = &ctx->mixer_res;
+ int ret;
mutex_lock(&ctx->mixer_mutex);
if (ctx->powered) {
@@ -1042,12 +1043,32 @@ static void mixer_enable(struct exynos_drm_crtc *crtc)
pm_runtime_get_sync(ctx->dev);
- clk_prepare_enable(res->mixer);
- clk_prepare_enable(res->hdmi);
+ ret = clk_prepare_enable(res->mixer);
+ if (ret < 0) {
+ DRM_ERROR("Failed to prepare_enable the mixer clk [%d]\n", ret);
+ return;
+ }
+ ret = clk_prepare_enable(res->hdmi);
+ if (ret < 0) {
+ DRM_ERROR("Failed to prepare_enable the hdmi clk [%d]\n", ret);
+ return;
+ }
if (ctx->vp_enabled) {
- clk_prepare_enable(res->vp);
- if (ctx->has_sclk)
- clk_prepare_enable(res->sclk_mixer);
+ ret = clk_prepare_enable(res->vp);
+ if (ret < 0) {
+ DRM_ERROR("Failed to prepare_enable the vp clk [%d]\n",
+ ret);
+ return;
+ }
+ if (ctx->has_sclk) {
+ ret = clk_prepare_enable(res->sclk_mixer);
+ if (ret < 0) {
+ DRM_ERROR("Failed to prepare_enable the " \
+ "sclk_mixer clk [%d]\n",
+ ret);
+ return;
+ }
+ }
}
mutex_lock(&ctx->mixer_mutex);
--
2.1.0
More information about the dri-devel
mailing list