[PATCH v2 2/2] drm/panel: Add display timing for Okaya RS800480T-7X0GP

[Gary Bisson]

Hi Philipp,

On Tue, Jun 9, 2015 at 7:39 PM, Philipp Zabel <p.zabel at pengutronix.de> wrote:
> Hi Gary,
>
> Am Dienstag, den 09.06.2015, 17:59 +0200 schrieb Gary Bisson:
>> Add support for the Okaya RS800480T-7X0GP to the DRM simple panel
>> driver.
>>
>> The RS800480T-7X0GP is a WVGA (800x480) panel with an 18-bit parallel
>> LCD interface. It supports pixel clocks in the range of 30-40 MHz.
>>
>> This panel details can be found at:
>> http://boundarydevices.com/product/7-800x480-display/
>>
>> Signed-off-by: Gary Bisson <gary.bisson at boundarydevices.com>
>> ---
>>  .../bindings/panel/okaya,rs800480t_7x0gp.txt       |  7 ++++++
>>  drivers/gpu/drm/panel/panel-simple.c               | 27 ++++++++++++++++++++++
>>  2 files changed, 34 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/panel/okaya,rs800480t_7x0gp.txt
>>
>> diff --git a/Documentation/devicetree/bindings/panel/okaya,rs800480t_7x0gp.txt b/Documentation/devicetree/bindings/panel/okaya,rs800480t_7x0gp.txt
>> new file mode 100644
>> index 0000000..f7c729d
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/panel/okaya,rs800480t_7x0gp.txt
>> @@ -0,0 +1,7 @@
>> +OKAYA Electric America, Inc. RS800480T-7X0GP 7" WVGA LCD panel
>> +
>> +Required properties:
>> +- compatible: should be "okaya,rs800480t_7x0gp"
>> +
>> +This binding is compatible with the simple-panel binding, which is specified
>> +in simple-panel.txt in this directory.
>> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
>> index 97b66b8..e511a22 100644
>> --- a/drivers/gpu/drm/panel/panel-simple.c
>> +++ b/drivers/gpu/drm/panel/panel-simple.c
>> @@ -942,6 +942,30 @@ static const struct panel_desc lg_lp129qe = {
>>       },
>>  };
>>
>> +static const struct display_timing okaya_rs800480t_7x0gp_timing = {
>> +     .pixelclock = { 30000000, 30000000, 40000000 },
>> +     .hactive = { 800, 800, 800 },
>> +     .hfront_porch = { 40, 40, 40 },
>> +     .hback_porch = { 40, 40, 40 },
>> +     .hsync_len = { 1, 48, 48 },
>> +     .vactive = { 480, 480, 480 },
>> +     .vfront_porch = { 13, 13, 13 },
>> +     .vback_porch = { 29, 29, 29 },
>> +     .vsync_len = { 3, 3, 3 },
>> +     .flags = DISPLAY_FLAGS_DE_HIGH,
>> +};
>> +
>> +static const struct panel_desc okaya_rs800480t_7x0gp = {
>> +     .timings = &okaya_rs800480t_7x0gp_timing,
>> +     .num_timings = 1,
>> +     .bpc = 6,
>> +     .size = {
>> +             .width = 154,
>> +             .height = 87,
>> +     },
>
> Are there any poweron/poweroff sequencing delays in the datasheet that
> should be met? Parallel displays often specify a few ms delay after the
> voltage supply is stable and before pixel data should be driven on the
> bus (.delay.prepare), as well as afterwards, before activating the
> backlight (.delay.enable).

You are right I forgot to add those delays. I will submit a v3.

That gives prepare = unprepare = 40.5ms (rounded up to 41) and enable
= disable = 50ms based on the values provided at page 6/20 of the
following doc:
http://boundarydevices.com/datasheets/RS800480T-7X0GP-A.pdf

Regards,
Gary