[PATCH 2/2] drm/msm/dsi: Add support for msm8x94
Hai Li
hali at codeaurora.org
Thu Jun 18 07:14:21 PDT 2015
DSI controller on msm8x94 is version 1.3, which requires different
power supplies and works with 20nm DSI PHY. This change is to add
the basic support for this version.
Signed-off-by: Hai Li <hali at codeaurora.org>
---
Documentation/devicetree/bindings/drm/msm/dsi.txt | 7 ++
drivers/gpu/drm/msm/dsi/dsi.h | 1 +
drivers/gpu/drm/msm/dsi/dsi_host.c | 18 +++
drivers/gpu/drm/msm/dsi/dsi_phy.c | 131 ++++++++++++++++++++++
4 files changed, 157 insertions(+)
diff --git a/Documentation/devicetree/bindings/drm/msm/dsi.txt b/Documentation/devicetree/bindings/drm/msm/dsi.txt
index 4edd6fa..4309f0f 100644
--- a/Documentation/devicetree/bindings/drm/msm/dsi.txt
+++ b/Documentation/devicetree/bindings/drm/msm/dsi.txt
@@ -47,6 +47,7 @@ Required properties:
- compatible: Could be the following
* "qcom,dsi-phy-28nm-hpm"
* "qcom,dsi-phy-28nm-lp"
+ * "qcom,dsi-phy-20nm"
- reg: Physical base address and length of the registers of PLL, PHY and PHY
regulator
- reg-names: The names of register regions. The following regions are required:
@@ -62,6 +63,10 @@ Required properties:
* "iface_clk"
- vddio-supply: phandle to vdd-io regulator device node
+Optional properties:
+- qcom,dsi-phy-regulator-ldo-mode: Boolean value indicating if the LDO mode PHY
+ regulator is wanted.
+
Example:
mdss_dsi0: qcom,mdss_dsi at fd922800 {
compatible = "qcom,mdss-dsi-ctrl";
@@ -124,4 +129,6 @@ Example:
clock-names = "iface_clk";
clocks = <&mmcc MDSS_AHB_CLK>;
vddio-supply = <&pma8084_l12>;
+
+ qcom,dsi-phy-regulator-ldo-mode;
};
diff --git a/drivers/gpu/drm/msm/dsi/dsi.h b/drivers/gpu/drm/msm/dsi/dsi.h
index 5e29aad..e18872a 100644
--- a/drivers/gpu/drm/msm/dsi/dsi.h
+++ b/drivers/gpu/drm/msm/dsi/dsi.h
@@ -30,6 +30,7 @@
enum msm_dsi_phy_type {
MSM_DSI_PHY_28NM_HPM,
MSM_DSI_PHY_28NM_LP,
+ MSM_DSI_PHY_20NM,
MSM_DSI_PHY_MAX
};
diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index 69c1397..2d8f194 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -34,6 +34,7 @@
#define MSM_DSI_6G_VER_MINOR_V1_1 0x10010000
#define MSM_DSI_6G_VER_MINOR_V1_1_1 0x10010001
#define MSM_DSI_6G_VER_MINOR_V1_2 0x10020000
+#define MSM_DSI_6G_VER_MINOR_V1_3 0x10030000
#define MSM_DSI_6G_VER_MINOR_V1_3_1 0x10030001
#define DSI_6G_REG_SHIFT 4
@@ -117,6 +118,23 @@ static const struct dsi_config dsi_cfgs[] = {
},
},
},
+ { /* 8x94 */
+ .major = MSM_DSI_VER_MAJOR_6G,
+ .minor = MSM_DSI_6G_VER_MINOR_V1_3,
+ .io_offset = DSI_6G_REG_SHIFT,
+ .reg_cfg = {
+ .num = 7,
+ .regs = {
+ {"gdsc", -1, -1, -1, -1},
+ {"vdda", 1250000, 1250000, 100000, 100},
+ {"vddio", 1800000, 1800000, 100000, 100},
+ {"vcca", 1000000, 1000000, 10000, 100},
+ {"vdd", 1800000, 1800000, 100000, 100},
+ {"lab_reg", -1, -1, -1, -1},
+ {"ibb_reg", -1, -1, -1, -1},
+ },
+ }
+ },
};
static int dsi_get_version(const void __iomem *base, u32 *major, u32 *minor)
diff --git a/drivers/gpu/drm/msm/dsi/dsi_phy.c b/drivers/gpu/drm/msm/dsi/dsi_phy.c
index 52b463e..bd37e61 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_phy.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_phy.c
@@ -66,6 +66,8 @@ struct msm_dsi_phy {
struct dsi_dphy_timing timing;
const struct dsi_phy_cfg *cfg;
+ bool regulator_ldo_mode;
+
struct msm_dsi_pll *pll;
};
@@ -406,6 +408,115 @@ static int dsi_28nm_phy_disable(struct msm_dsi_phy *phy)
return 0;
}
+static void dsi_20nm_phy_regulator_ctrl(struct msm_dsi_phy *phy, bool enable)
+{
+ void __iomem *base = phy->reg_base;
+
+ if (!enable) {
+ dsi_phy_write(base + REG_DSI_20nm_PHY_REGULATOR_CAL_PWR_CFG, 0);
+ return;
+ }
+
+ if (phy->regulator_ldo_mode) {
+ dsi_phy_write(phy->base + REG_DSI_20nm_PHY_LDO_CNTRL, 0x1d);
+ return;
+ }
+
+ /* non LDO mode */
+ dsi_phy_write(base + REG_DSI_20nm_PHY_REGULATOR_CTRL_1, 0x03);
+ dsi_phy_write(base + REG_DSI_20nm_PHY_REGULATOR_CTRL_2, 0x03);
+ dsi_phy_write(base + REG_DSI_20nm_PHY_REGULATOR_CTRL_3, 0x00);
+ dsi_phy_write(base + REG_DSI_20nm_PHY_REGULATOR_CTRL_4, 0x20);
+ dsi_phy_write(base + REG_DSI_20nm_PHY_REGULATOR_CAL_PWR_CFG, 0x01);
+ dsi_phy_write(phy->base + REG_DSI_20nm_PHY_LDO_CNTRL, 0x00);
+ dsi_phy_write(base + REG_DSI_20nm_PHY_REGULATOR_CTRL_0, 0x03);
+}
+
+static int dsi_20nm_phy_enable(struct msm_dsi_phy *phy, int src_pll_id,
+ const unsigned long bit_rate, const unsigned long esc_rate)
+{
+ struct dsi_dphy_timing *timing = &phy->timing;
+ int i;
+ void __iomem *base = phy->base;
+ u32 cfg_4[4] = {0x20, 0x40, 0x20, 0x00};
+
+ DBG("");
+
+ if (dsi_dphy_timing_calc(timing, bit_rate, esc_rate)) {
+ pr_err("%s: D-PHY timing calculation failed\n", __func__);
+ return -EINVAL;
+ }
+
+ dsi_20nm_phy_regulator_ctrl(phy, true);
+
+ dsi_phy_write(base + REG_DSI_20nm_PHY_STRENGTH_0, 0xff);
+
+ dsi_phy_set_src_pll(phy, src_pll_id, REG_DSI_20nm_PHY_GLBL_TEST_CTRL);
+
+ for (i = 0; i < 4; i++) {
+ dsi_phy_write(base + REG_DSI_20nm_PHY_LN_CFG_3(i),
+ (i >> 1) * 0x40);
+ dsi_phy_write(base + REG_DSI_20nm_PHY_LN_TEST_STR_0(i), 0x01);
+ dsi_phy_write(base + REG_DSI_20nm_PHY_LN_TEST_STR_1(i), 0x46);
+ dsi_phy_write(base + REG_DSI_20nm_PHY_LN_CFG_0(i), 0x02);
+ dsi_phy_write(base + REG_DSI_20nm_PHY_LN_CFG_1(i), 0xa0);
+ dsi_phy_write(base + REG_DSI_20nm_PHY_LN_CFG_4(i), cfg_4[i]);
+ }
+
+ dsi_phy_write(base + REG_DSI_20nm_PHY_LNCK_CFG_3, 0x80);
+ dsi_phy_write(base + REG_DSI_20nm_PHY_LNCK_TEST_STR0, 0x01);
+ dsi_phy_write(base + REG_DSI_20nm_PHY_LNCK_TEST_STR1, 0x46);
+ dsi_phy_write(base + REG_DSI_20nm_PHY_LNCK_CFG_0, 0x00);
+ dsi_phy_write(base + REG_DSI_20nm_PHY_LNCK_CFG_1, 0xa0);
+ dsi_phy_write(base + REG_DSI_20nm_PHY_LNCK_CFG_2, 0x00);
+ dsi_phy_write(base + REG_DSI_20nm_PHY_LNCK_CFG_4, 0x00);
+
+ dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_0,
+ DSI_20nm_PHY_TIMING_CTRL_0_CLK_ZERO(timing->clk_zero));
+ dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_1,
+ DSI_20nm_PHY_TIMING_CTRL_1_CLK_TRAIL(timing->clk_trail));
+ dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_2,
+ DSI_20nm_PHY_TIMING_CTRL_2_CLK_PREPARE(timing->clk_prepare));
+ if (timing->clk_zero & BIT(8))
+ dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_3,
+ DSI_20nm_PHY_TIMING_CTRL_3_CLK_ZERO_8);
+ dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_4,
+ DSI_20nm_PHY_TIMING_CTRL_4_HS_EXIT(timing->hs_exit));
+ dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_5,
+ DSI_20nm_PHY_TIMING_CTRL_5_HS_ZERO(timing->hs_zero));
+ dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_6,
+ DSI_20nm_PHY_TIMING_CTRL_6_HS_PREPARE(timing->hs_prepare));
+ dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_7,
+ DSI_20nm_PHY_TIMING_CTRL_7_HS_TRAIL(timing->hs_trail));
+ dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_8,
+ DSI_20nm_PHY_TIMING_CTRL_8_HS_RQST(timing->hs_rqst));
+ dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_9,
+ DSI_20nm_PHY_TIMING_CTRL_9_TA_GO(timing->ta_go) |
+ DSI_20nm_PHY_TIMING_CTRL_9_TA_SURE(timing->ta_sure));
+ dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_10,
+ DSI_20nm_PHY_TIMING_CTRL_10_TA_GET(timing->ta_get));
+ dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_11,
+ DSI_20nm_PHY_TIMING_CTRL_11_TRIG3_CMD(0));
+
+ dsi_phy_write(base + REG_DSI_20nm_PHY_CTRL_1, 0x00);
+
+ dsi_phy_write(base + REG_DSI_20nm_PHY_STRENGTH_1, 0x06);
+
+ /* make sure everything is written before enable */
+ wmb();
+ dsi_phy_write(base + REG_DSI_20nm_PHY_CTRL_0, 0x7f);
+
+ return 0;
+}
+
+static int dsi_20nm_phy_disable(struct msm_dsi_phy *phy)
+{
+ dsi_phy_write(phy->base + REG_DSI_20nm_PHY_CTRL_0, 0);
+ dsi_20nm_phy_regulator_ctrl(phy, false);
+
+ return 0;
+}
+
static int dsi_phy_enable_resource(struct msm_dsi_phy *phy)
{
int ret;
@@ -456,6 +567,21 @@ static const struct dsi_phy_cfg dsi_phy_cfgs[MSM_DSI_PHY_MAX] = {
.disable = dsi_28nm_phy_disable,
}
},
+ [MSM_DSI_PHY_20NM] = {
+ .type = MSM_DSI_PHY_20NM,
+ .src_pll_truthtable = { {false, true}, {false, true} },
+ .reg_cfg = {
+ .num = 2,
+ .regs = {
+ {"vddio", 1800000, 1800000, 100000, 100},
+ {"vcca", 1000000, 1000000, 10000, 100},
+ },
+ },
+ .ops = {
+ .enable = dsi_20nm_phy_enable,
+ .disable = dsi_20nm_phy_disable,
+ }
+ },
};
static const struct of_device_id dsi_phy_dt_match[] = {
@@ -463,6 +589,8 @@ static const struct of_device_id dsi_phy_dt_match[] = {
.data = &dsi_phy_cfgs[MSM_DSI_PHY_28NM_HPM],},
{ .compatible = "qcom,dsi-phy-28nm-lp",
.data = &dsi_phy_cfgs[MSM_DSI_PHY_28NM_LP],},
+ { .compatible = "qcom,dsi-phy-20nm",
+ .data = &dsi_phy_cfgs[MSM_DSI_PHY_20NM],},
{}
};
@@ -492,6 +620,9 @@ static int dsi_phy_driver_probe(struct platform_device *pdev)
goto fail;
}
+ phy->regulator_ldo_mode = of_property_read_bool(pdev->dev.of_node,
+ "qcom,dsi-phy-regulator-ldo-mode");
+
phy->base = msm_ioremap(pdev, "dsi_phy", "DSI_PHY");
if (IS_ERR(phy->base)) {
dev_err(&pdev->dev, "%s: failed to map phy base\n", __func__);
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
More information about the dri-devel
mailing list