WARNING: CPU: 0 PID: 3634 at drivers/gpu/drm/drm_irq.c:1141 drm_wait_one_vblank
Daniel Vetter
daniel at ffwll.ch
Tue Jun 30 09:59:29 PDT 2015
On Tue, Jun 30, 2015 at 06:07:44PM +0200, Michal Hocko wrote:
> On Tue 30-06-15 16:32:49, Daniel Vetter wrote:
> [...]
> > Looks like the vblank is actually running, just the wakeup somehow doesn't
> > happen in time. What machine is this (lspci -nn)?
>
> 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09)
> 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0126] (rev 09)
> 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
> 00:16.3 Serial controller [0700]: Intel Corporation 6 Series/C200 Series Chipset Family KT Controller [8086:1c3d] (rev 04)
> 00:19.0 Ethernet controller [0200]: Intel Corporation 82579LM Gigabit Network Connection [8086:1502] (rev 04)
> 00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04)
> 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 04)
> 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b4)
> 00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b4)
> 00:1c.2 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 [8086:1c14] (rev b4)
> 00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b4)
> 00:1c.5 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 [8086:1c1a] (rev b4)
> 00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 04)
> 00:1f.0 ISA bridge [0601]: Intel Corporation QM67 Express Chipset Family LPC Controller [8086:1c4f] (rev 04)
> 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 04)
> 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 04)
> 02:00.0 Network controller [0280]: Intel Corporation Centrino Ultimate-N 6300 [8086:422b] (rev 35)
> 0a:00.0 SD Host controller [0805]: O2 Micro, Inc. OZ600FJ0/OZ900FJ0/OZ600FJS SD/MMC Card Reader Controller [1217:8221] (rev 05)
>
> > Also please boot with
> > drm.debug=0xe and grab dmesg after this happens for the first time.
> > logfile will be large, you might need to increase the buffer size with
> > log_buf_len or grab it from the hd.
>
> See attached.
>
> > Also what happens when you increase the timeout to 1000 (just to make sure
> > it's not just a silly delay somewhere).
>
> Still happening even when the timeout was increased to 1000. Curiously
> the display is much darker with this change and I cannot make it
> brighter by function keys...
>
> > Also have you any special features like psr, fbc or something similar
> > enabled?
>
> I am not aware of anything like that. How do I check it?
I looked at dmesg, nothing out of the ordinary there. Unfortunately also
no hints why the pipe is somehow off when we think it's on. Can you please
test the below patch and grab a new dmesg?
Also it might be time to start bisecting this if you can readily reproduce it.
-Daniel
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index d0f3cbc87474..b8d9314ef459 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -12190,7 +12190,7 @@ static int intel_crtc_set_config(struct drm_mode_set *set)
* flipping, so increasing its cost here shouldn't be a big
* deal).
*/
- if (i915.fastboot && ret == 0)
+ if (ret == 0)
intel_modeset_check_state(set->crtc->dev);
}
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
More information about the dri-devel
mailing list