[RFC 1/6] drm: Add top level Kconfig option for DRM fbdev emulation

[Archit Taneja]

On 03/10/2015 03:16 PM, Daniel Vetter wrote:
> On Tue, Mar 10, 2015 at 03:11:28PM +0530, Archit Taneja wrote:
>> Legacy fbdev emulation support via DRM is achieved through KMS FB helpers.
>> Most modesetting drivers enable provide fbdev emulation by default by selecting
>> KMS FB helpers. A few provide a separate Kconfig option for the user to enable
>> or disbale fbdev emulation.
>>
>> Enabling fbdev emulation is finally a distro-level decision. Having a top level
>> Kconfig option for fbdev emulation helps by providing a uniform way to
>> enable/disable fbdev emulation for any modesetting driver. It also lets us
>> remove unnecessary driver specific Kconfig options that causes bloat.
>>
>> With a top level Kconfig in place, we can stub out the fb helper functions when
>> not needed without breaking functionality. Having stub functions also prevents
>> drivers to require wrapping fb helper function calls with #ifdefs.
>>
>> DRM_FBDEV_EMULATION defaults to y since many drivers enable fbdev emulation by
>> default and majority of distributions expect the fbdev interface in the kernel.
>>
>> For now, this config selects both FB_SYS_* and FB_CFB_* configs as some
>> modesetting drivers use the former and other the later. This needs to be taken
>> care of in a better way.
>>
>> Signed-off-by: Archit Taneja <architt at codeaurora.org>
>> ---
>>   drivers/gpu/drm/Kconfig     |  18 +++++++
>>   drivers/gpu/drm/Makefile    |   4 ++
>>   include/drm/drm_fb_helper.h | 120 ++++++++++++++++++++++++++++++++++++++++++++
>>   3 files changed, 142 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
>> index 151a050..38f83a0 100644
>> --- a/drivers/gpu/drm/Kconfig
>> +++ b/drivers/gpu/drm/Kconfig
>> @@ -40,6 +40,24 @@ config DRM_KMS_FB_HELPER
>>   	help
>>   	  FBDEV helpers for KMS drivers.
>>
>> +config DRM_FBDEV_EMULATION
>> +	bool "Enable legacy fbdev support for your modesetting driver"
>> +	depends on DRM
>> +	select DRM_KMS_HELPER
>> +	select DRM_KMS_FB_HELPER
>> +	select FB_SYS_FILLRECT
>> +	select FB_SYS_COPYAREA
>> +	select FB_SYS_IMAGEBLIT
>> +	select FB_SYS_FOPS
>> +	select FB_CFB_FILLRECT
>> +	select FB_CFB_COPYAREA
>> +	select FB_CFB_IMAGEBLIT
>> +	default y
>> +	help
>> +	  Choose this option if you have a need for the legacy fbdev
>> +	  support. Note that this support also provide the linux console
>> +	  support on top of your modesetting driver.
>> +
>>   config DRM_LOAD_EDID_FIRMWARE
>>   	bool "Allow to specify an EDID data set instead of probing for it"
>>   	depends on DRM_KMS_HELPER
>> diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
>> index 2c239b9..c1d44b2 100644
>> --- a/drivers/gpu/drm/Makefile
>> +++ b/drivers/gpu/drm/Makefile
>> @@ -25,7 +25,11 @@ drm-$(CONFIG_OF) += drm_of.o
>>   drm_kms_helper-y := drm_crtc_helper.o drm_dp_helper.o drm_probe_helper.o \
>>   		drm_plane_helper.o drm_dp_mst_topology.o drm_atomic_helper.o
>>   drm_kms_helper-$(CONFIG_DRM_LOAD_EDID_FIRMWARE) += drm_edid_load.o
>> +
>> +ifeq ($(CONFIG_DRM_FBDEV_EMULATION),y)
>>   drm_kms_helper-$(CONFIG_DRM_KMS_FB_HELPER) += drm_fb_helper.o
>> +endif
>
> This should work as
>
> drm_kms_helper-$CONFIG_DRM_FBDEV_EMULATION += drm_fb_helper.o
>
> since both <modename>-y and <modename>-m are merged together.

Ah right. I'll fix that.

Archit

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project