[PATCH v4 04/15] drm: bridge/dw_hdmi: add identification registers parse and record

[Philipp Zabel]

Am Samstag, den 28.02.2015, 21:35 -0500 schrieb Yakir Yang:
> By parsing the identification registers we can know what functions
> are present on the hdmi ip.
> 
> Signed-off-by: Yakir Yang <ykk at rock-chips.com>
> ---
> Changes in v4:
> -Correct phy_type assignment bug
> 
> Changes in v3:
> - Add ID registers parse and record
> 
> Changes in v2: None
> 
>  drivers/gpu/drm/bridge/dw_hdmi.c | 59 ++++++++++++++++++++++++++++++++++++++++
>  drivers/gpu/drm/bridge/dw_hdmi.h | 23 ++++++++++++++++
>  2 files changed, 82 insertions(+)
> 
> diff --git a/drivers/gpu/drm/bridge/dw_hdmi.c b/drivers/gpu/drm/bridge/dw_hdmi.c
> index 08f10da..937beed 100644
> --- a/drivers/gpu/drm/bridge/dw_hdmi.c
> +++ b/drivers/gpu/drm/bridge/dw_hdmi.c
> @@ -79,6 +79,23 @@ static const u16 csc_coeff_rgb_in_eitu709[3][4] = {
>  	{ 0x6756, 0x78ab, 0x2000, 0x0200 }
>  };
>  
> +struct hdmi_id {
> +	u8 design;
> +	u8 revision;
> +
> +	bool prepen;
> +	bool audspdif;
> +	bool audi2s;
> +	bool hdmi14;
> +	bool csc;
> +	bool hdcp;
> +	bool hdmi20;
> +	bool confapb;
> +	bool ahbauddma;
> +	bool gpaud;
> +	u8 phy_type;
> +};
>
>  struct hdmi_vmode {
>  	bool mdvi;
>  	bool mhsyncpolarity;
> @@ -111,6 +128,8 @@ struct dw_hdmi {
>  	struct clk *isfr_clk;
>  	struct clk *iahb_clk;
>  
> +	struct hdmi_id id;
> +
>  	struct hdmi_data_info hdmi_data;
>  	const struct dw_hdmi_plat_data *plat_data;
>  
> @@ -1259,6 +1278,36 @@ static int dw_hdmi_setup(struct dw_hdmi *hdmi, struct drm_display_mode *mode)
>  	return 0;
>  }
>  
> +static void hdmi_parse_id(struct dw_hdmi *hdmi)
> +{
> +	u8 config0_id, config1_id, config2_id, config3_id;
> +
> +	config0_id = hdmi_readb(hdmi, HDMI_CONFIG0_ID);
> +	config1_id = hdmi_readb(hdmi, HDMI_CONFIG1_ID);
> +	config2_id = hdmi_readb(hdmi, HDMI_CONFIG2_ID);
> +	config3_id = hdmi_readb(hdmi, HDMI_CONFIG3_ID);
> +
> +	hdmi->id.prepen = config0_id & HDMI_CONFIG0_ID_PREPEN ? true : false;
> +	hdmi->id.audi2s = config0_id & HDMI_CONFIG0_ID_AUDI2S ? true : false;
> +	hdmi->id.hdmi14 = config0_id & HDMI_CONFIG0_ID_HDMI14 ? true : false;
> +	hdmi->id.hdcp = config0_id & HDMI_CONFIG0_ID_HDCP ? true : false;
> +	hdmi->id.csc = config0_id & HDMI_CONFIG0_ID_CSC ? true : false;
> +	hdmi->id.audspdif = config0_id & HDMI_CONFIG0_ID_AUDSPDIF ?
> +			    true : false;
> +
> +	hdmi->id.confapb = config1_id & HDMI_CONFIG1_ID_CONFAPB ? true : false;
> +	hdmi->id.hdmi20 = config1_id & HDMI_CONFIG1_ID_HDMI20 ? true : false;
> +
> +	hdmi->id.phy_type = config2_id;
> +
> +	hdmi->id.gpaud = config3_id & HDMI_CONFIG3_ID_GPAUD ? true : false;
> +	hdmi->id.ahbauddma = config3_id & HDMI_CONFIG3_ID_AHBAUDDMA ?
> +			     true : false;
> +
> +	hdmi->id.design = hdmi_readb(hdmi, HDMI_DESIGN_ID);
> +	hdmi->id.revision = hdmi_readb(hdmi, HDMI_REVISION_ID);
> +}

What is the purpose of creating a copy of all the feature bits? As far
as I can tell you are only ever using hdmi_id.design afterwards.

regards
Philipp