[Intel-gfx] [PATCH i-g-t v3] tests/core_getparams: Create new test core_getparams
Daniel Vetter
daniel at ffwll.ch
Fri Mar 13 09:32:41 PDT 2015
On Fri, Mar 13, 2015 at 05:09:46PM +0800, Zhigang Gong wrote:
> My only concern is about the following macros:
>
> > +#define LOCAL_I915_PARAM_SUBSLICE_TOTAL 33
> > +#define LOCAL_I915_PARAM_EU_TOTAL 34
>
> How about to just use the definitons in the kernel header file?
> For an example:
>
> #include <drm/i915_drm.h>
>
> #ifdef LOCAL_I915_PARAM_SUBSLICE_TOTAL
> //Put all the code into this block.
> #endif
>
> Then we can avoid put the same definitions in different files,
> and we can avoid unecessary testing on an old kernel which doesn't
> have this kernel interface.
>
> For all the other part, it LGTM.
>
> Reviewed-by: Zhigang Gong <zhigang.gong at linux.intel.com>
Once we update the libdrm requirements in igt we tend to go around and
replace all the now obsolete LOCAL_ defines. Imo not worth doing extra
work until then.
Patch applied, thanks.
-Daniel
>
> Thanks,
> Zhigang Gong.
>
> On Thu, Mar 12, 2015 at 05:26:25PM -0700, jeff.mcgee at intel.com wrote:
> > From: Jeff McGee <jeff.mcgee at intel.com>
> >
> > New test core_getparams consists of 2 subtests, each one testing
> > the ability of userspace to query the correct value of a GT config
> > attribute: subslice total or EU total. drm/i915 implementation of
> > these queries is required for Cherryview and Gen9+ devices (non-
> > simulated).
> >
> > v2: Duplicate small amount of new libdrm functionality to avoid
> > bumping libdrm version requirement (Daniel). Convert some
> > igt_asserts to the appropriate comparison variants. Add a
> > test description.
> > v3: Actually use the LOCAL GETPARAM defines. Otherwise can't build
> > against older libdrm as intended by v2.
> >
> > For: VIZ-4636
> > Signed-off-by: Jeff McGee <jeff.mcgee at intel.com>
> > ---
> > tests/.gitignore | 1 +
> > tests/Makefile.sources | 1 +
> > tests/core_getparams.c | 167 +++++++++++++++++++++++++++++++++++++++++++++++++
> > 3 files changed, 169 insertions(+)
> > create mode 100644 tests/core_getparams.c
> >
> > diff --git a/tests/.gitignore b/tests/.gitignore
> > index 426cc67..c742308 100644
> > --- a/tests/.gitignore
> > +++ b/tests/.gitignore
> > @@ -1,6 +1,7 @@
> > # Please keep sorted alphabetically
> > core_get_client_auth
> > core_getclient
> > +core_getparams
> > core_getstats
> > core_getversion
> > drm_import_export
> > diff --git a/tests/Makefile.sources b/tests/Makefile.sources
> > index 51e8376..999c8f8 100644
> > --- a/tests/Makefile.sources
> > +++ b/tests/Makefile.sources
> > @@ -15,6 +15,7 @@ NOUVEAU_TESTS_M = \
> >
> > TESTS_progs_M = \
> > core_get_client_auth \
> > + core_getparams \
> > drv_suspend \
> > drv_hangman \
> > gem_bad_reloc \
> > diff --git a/tests/core_getparams.c b/tests/core_getparams.c
> > new file mode 100644
> > index 0000000..2855d06
> > --- /dev/null
> > +++ b/tests/core_getparams.c
> > @@ -0,0 +1,167 @@
> > +/*
> > + * Copyright © 2014 Intel Corporation
> > + *
> > + * Permission is hereby granted, free of charge, to any person obtaining a
> > + * copy of this software and associated documentation files (the "Software"),
> > + * to deal in the Software without restriction, including without limitation
> > + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> > + * and/or sell copies of the Software, and to permit persons to whom the
> > + * Software is furnished to do so, subject to the following conditions:
> > + *
> > + * The above copyright notice and this permission notice (including the next
> > + * paragraph) shall be included in all copies or substantial portions of the
> > + * Software.
> > + *
> > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> > + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> > + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> > + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> > + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
> > + * IN THE SOFTWARE.
> > + *
> > + * Authors:
> > + * Jeff McGee <jeff.mcgee at intel.com>
> > + *
> > + */
> > +
> > +#include <unistd.h>
> > +#include <errno.h>
> > +#include <xf86drm.h>
> > +#include <i915_drm.h>
> > +#include "drmtest.h"
> > +#include "intel_chipset.h"
> > +#include "intel_bufmgr.h"
> > +
> > +IGT_TEST_DESCRIPTION("Tests the export of parameters via DRM_IOCTL_I915_GETPARAM\n");
> > +
> > +int drm_fd;
> > +int devid;
> > +
> > +static void
> > +init(void)
> > +{
> > + drm_fd = drm_open_any();
> > + devid = intel_get_drm_devid(drm_fd);
> > +}
> > +
> > +static void
> > +deinit(void)
> > +{
> > + close(drm_fd);
> > +}
> > +
> > +#define LOCAL_I915_PARAM_SUBSLICE_TOTAL 33
> > +#define LOCAL_I915_PARAM_EU_TOTAL 34
> > +
> > +static int
> > +getparam(int param, int *value)
> > +{
> > + drm_i915_getparam_t gp;
> > + int ret;
> > +
> > + memset(&gp, 0, sizeof(gp));
> > + gp.value = value;
> > + gp.param = param;
> > + ret = drmIoctl(drm_fd, DRM_IOCTL_I915_GETPARAM, &gp);
> > + if (ret)
> > + return -errno;
> > +
> > + return 0;
> > +}
> > +
> > +static void
> > +subslice_total(void)
> > +{
> > + unsigned int subslice_total = 0;
> > + int ret;
> > +
> > + ret = getparam(LOCAL_I915_PARAM_SUBSLICE_TOTAL, (int*)&subslice_total);
> > +
> > + if (ret) {
> > + /*
> > + * These devices are not required to implement the
> > + * interface. If they do not, -ENODEV must be returned.
> > + */
> > + if ((intel_gen(devid) < 8) ||
> > + IS_BROADWELL(devid) ||
> > + igt_run_in_simulation()) {
> > + igt_assert_eq(ret, -ENODEV);
> > + igt_info("subslice total: unknown\n");
> > + /*
> > + * All other devices must implement the interface, so
> > + * fail them if we are here.
> > + */
> > + } else {
> > + igt_assert_neq(ret, EINVAL); /* request not recognized? */
> > + igt_assert_neq(ret, ENODEV); /* device not supported? */
> > + igt_assert_eq(ret, 0); /* other error? */
> > + }
> > + } else {
> > + /*
> > + * On success, just make sure the returned count value is
> > + * non-zero. The validity of the count value for the given
> > + * device is not checked.
> > + */
> > + igt_assert_neq(subslice_total, 0);
> > + igt_info("subslice total: %u\n", subslice_total);
> > + }
> > +}
> > +
> > +static void
> > +eu_total(void)
> > +{
> > + unsigned int eu_total = 0;
> > + int ret;
> > +
> > + ret = getparam(LOCAL_I915_PARAM_EU_TOTAL, (int*)&eu_total);
> > +
> > + if (ret) {
> > + /*
> > + * These devices are not required to implement the
> > + * interface. If they do not, -ENODEV must be returned.
> > + */
> > + if ((intel_gen(devid) < 8) ||
> > + IS_BROADWELL(devid) ||
> > + igt_run_in_simulation()) {
> > + igt_assert_eq(ret, -ENODEV);
> > + igt_info("EU total: unknown\n");
> > + /*
> > + * All other devices must implement the interface, so
> > + * fail them if we are here.
> > + */
> > + } else {
> > + igt_assert_neq(ret, EINVAL); /* request not recognized? */
> > + igt_assert_neq(ret, ENODEV); /* device not supported? */
> > + igt_assert_eq(ret, 0); /* other error? */
> > + }
> > + } else {
> > + /*
> > + * On success, just make sure the returned count value is
> > + * non-zero. The validity of the count value for the given
> > + * device is not checked.
> > + */
> > + igt_assert_neq(eu_total, 0);
> > + igt_info("EU total: %u\n", eu_total);
> > + }
> > +}
> > +
> > +static void
> > +exit_handler(int sig)
> > +{
> > + deinit();
> > +}
> > +
> > +igt_main
> > +{
> > + igt_fixture {
> > + igt_install_exit_handler(exit_handler);
> > + init();
> > + }
> > +
> > + igt_subtest("subslice-total")
> > + subslice_total();
> > +
> > + igt_subtest("eu-total")
> > + eu_total();
> > +}
> > --
> > 2.3.0
> >
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx at lists.freedesktop.org
> > http://lists.freedesktop.org/mailman/listinfo/intel-gfx
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
More information about the dri-devel
mailing list