[PATCH v2 1/6] drm/exynos: add Exynos5433 decon driver
Daniel Stone
daniel at fooishbar.org
Wed Mar 18 05:24:40 PDT 2015
Hi,
Some feedback comments - most of these are not unique to your 5433
DECON driver but endemic throughout Exynos, so I don't blame you for
them - but they should be fixed anyway.
On 18 March 2015 at 08:16, Hyungwon Hwang <human.hwang at samsung.com> wrote:
> +static void decon_dpms_on(struct exynos_decon *decon)
> +{
> + int ret;
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(decon_clks_name); i++) {
> + ret = clk_prepare_enable(decon->clks[i]);
> + if (ret < 0)
> + goto err;
> + }
> +
> + set_bit(BIT_CLKS_ENABLED, &decon->enabled);
Do you really not even need to set a control register?
> +static void decon_commit(struct exynos_drm_crtc *crtc)
> +{
> + struct exynos_decon *decon = crtc->ctx;
> + struct drm_display_mode *mode = &crtc->base.mode;
> + u32 val;
> +
> + /* enable clock gate */
> + val = CMU_CLKGAGE_MODE_SFR_F | CMU_CLKGAGE_MODE_MEM_F;
> + writel(val, decon->addr + DECON_CMU);
> +
> + /* lcd on and use command if */
> + val = VIDOUT_LCD_ON;
> + if (decon->i80_if)
> + val |= VIDOUT_COMMAND_IF;
> + else
> + val |= VIDOUT_RGB_IF;
> + writel(val, decon->addr + DECON_VIDOUTCON0);
This seems much more likely to be DPMS, no?
> + [...]
> + /* enable output and display signal */
> + val = VIDCON0_ENVID | VIDCON0_ENVID_F;
> + writel(val, decon->addr + DECON_VIDCON0);
As does this.
Have you tested DPMS on/off, without enabling/disabling the CRTC
first? Does it work?
> +static void decon_win_mode_set(struct exynos_drm_crtc *crtc,
> + struct exynos_drm_plane *plane)
> +{
> + struct exynos_decon *decon = crtc->ctx;
> + struct decon_reg_data *reg_data;
> + unsigned int bytes_per_pixel = plane->bpp >> 3;
> + unsigned int val_h;
> + unsigned int val_l;
> + unsigned int win;
> + dma_addr_t addr;
> + u32 val = 0;
> +
> + if (!plane) {
> + DRM_ERROR("plane is NULL\n");
> + return;
> + }
> +
> + win = plane->zpos;
> + if (win == DEFAULT_ZPOS)
> + win = 0;
> +
> + if (win < 0 || win >= 5)
> + return;
It would be nice to have a #define for the largest-supported window number.
> + reg_data = &decon->reg_data[win];
> +
> + switch (plane->pixel_format) {
> + case DRM_FORMAT_XRGB1555:
> + val |= WINCONx_BPPMODE_16BPP_I1555;
> + val |= WINCONx_HAWSWP_F;
> + val |= WINCONx_BURSTLEN_16WORD;
> + break;
> + case DRM_FORMAT_RGB565:
> + val |= WINCONx_BPPMODE_16BPP_565;
> + val |= WINCONx_HAWSWP_F;
> + val |= WINCONx_BURSTLEN_16WORD;
> + break;
> + case DRM_FORMAT_XRGB8888:
> + val |= WINCONx_BPPMODE_24BPP_888;
> + val |= WINCONx_WSWP_F;
> + val |= WINCONx_BURSTLEN_16WORD;
> + break;
> + case DRM_FORMAT_ARGB8888:
> + val |= WINCONx_BPPMODE_32BPP_A8888;
> + val |= WINCONx_WSWP_F | WINCONx_BLD_PIX_F | WINCONx_ALPHA_SEL_F;
> + val |= WINCONx_BURSTLEN_16WORD;
> + break;
> + default:
Please remove the 'default' case. If you get here with a format you
don't know how to configure, then it is a bug and should be fixed: the
plane should never advertise a format that it cannot support.
> + val |= WINCONx_BPPMODE_24BPP_888;
> + val |= WINCONx_WSWP_F;
> + val |= WINCONx_BURSTLEN_16WORD;
> + break;
> + }
> +
> + reg_data->wincon = val;
> + reg_data->vidosd_a = COORDINATE_X(plane->crtc_x) |
> + COORDINATE_Y(plane->crtc_y);
> + reg_data->vidosd_b =
> + COORDINATE_X(plane->crtc_x + plane->crtc_width - 1) |
> + COORDINATE_Y(plane->crtc_y + plane->crtc_height - 1);
> + reg_data->vidosd_c = VIDOSD_Wx_ALPHA_R_F(0x0) |
> + VIDOSD_Wx_ALPHA_G_F(0x0) |
> + VIDOSD_Wx_ALPHA_B_F(0x0);
> + reg_data->vidosd_d = VIDOSD_Wx_ALPHA_R_F(0x0) |
> + VIDOSD_Wx_ALPHA_G_F(0x0) |
> + VIDOSD_Wx_ALPHA_B_F(0x0);
> +
> + addr = plane->dma_addr[0];
> + addr += plane->fb_width * plane->fb_y * bytes_per_pixel;
Replace plane->fb_width * bytes_per_pixel by plane->fb_pitch please,
and set plane->fb_pitch from exynos_drm_plane->pitch. See this patch:
https://www.mail-archive.com/linux-samsung-soc@vger.kernel.org/msg42861.html
You should be able to test this case, either by making a specialised
userspace program which has a larger pitch with garbage values in the
padding (see https://msdn.microsoft.com/en-us/library/windows/desktop/aa473780(v=vs.85).aspx),
or by testing a resolution where width*bytespp is not a multiple of 4,
e.g. 1366x768.
> + addr += plane->fb_x * bytes_per_pixel;
> +
> + reg_data->vidw_add0 = addr;
> +
> + addr += plane->fb_width * plane->crtc_height * bytes_per_pixel;
Again, replace fb_width*bytes_per_pixel with fb_pitch.
> + reg_data->vidw_add1 = addr;
> +
> + val_h = (plane->fb_width - plane->crtc_width) * bytes_per_pixel;
val_h = plane->fb_pitch - (plane->crtc_width * bytes_per_pixel);
> +static void decon_win_commit(struct exynos_drm_crtc *crtc, int zpos)
> +{
> + struct exynos_decon *decon = crtc->ctx;
> + struct decon_reg_data *reg_data;
> + unsigned int win = zpos;
> + u32 val;
> +
> + if (win == DEFAULT_ZPOS)
> + win = 0;
> +
> + if (win < 0 || win >= 5)
> + return;
> +
> + reg_data = &decon->reg_data[win];
> +
> + /* shadow update disable */
> + val = readl(decon->addr + DECON_SHADOWCON);
> + val |= SHADOWCON_Wx_PROTECT(win);
> + writel(val, decon->addr + DECON_SHADOWCON);
> +
> + writel(reg_data->vidosd_a, decon->addr + DECON_VIDOSDxA(win));
> + writel(reg_data->vidosd_b, decon->addr + DECON_VIDOSDxB(win));
> + writel(reg_data->vidosd_c, decon->addr + DECON_VIDOSDxC(win));
> + writel(reg_data->vidosd_d, decon->addr + DECON_VIDOSDxD(win));
> + writel(reg_data->vidw_add0, decon->addr + DECON_VIDW0xADD0B0(win));
> + writel(reg_data->vidw_add1, decon->addr + DECON_VIDW0xADD1B0(win));
> + writel(reg_data->vidw_add2, decon->addr + DECON_VIDW0xADD2(win));
> +
> + /* window enable */
> + val = reg_data->wincon;
> + val |= WINCONx_ENWIN_F;
> + writel(val, decon->addr + DECON_WINCONx(win));
> +
> + /* shadow update enable */
> + val = readl(decon->addr + DECON_SHADOWCON);
> + val &= ~SHADOWCON_Wx_PROTECT(win);
> + writel(val, decon->addr + DECON_SHADOWCON);
> +
> + /* standalone update */
> + val = readl(decon->addr + DECON_UPDATE);
> + val |= STANDALONE_UPDATE_F;
> + writel(val, decon->addr + DECON_UPDATE);
> +
> + if (decon->i80_if)
> + atomic_set(&decon->win_updated, 1);
> +}
> +
> +static void decon_win_disable(struct exynos_drm_crtc *crtc, int zpos)
> +{
> + struct exynos_decon *decon = crtc->ctx;
> + struct decon_reg_data *reg_data;
> + unsigned int win = zpos;
> + u32 val;
> +
> + if (win == DEFAULT_ZPOS)
> + win = 0;
> +
> + if (win < 0 || win >= 5)
> + return;
> +
> + reg_data = &decon->reg_data[win];
> +
> + /* shadow update disable */
> + val = readl(decon->addr + DECON_SHADOWCON);
> + val |= SHADOWCON_Wx_PROTECT(win);
> + writel(val, decon->addr + DECON_SHADOWCON);
> +
> + /* window disable */
> + val = reg_data->wincon;
> + val &= ~WINCONx_ENWIN_F;
> + writel(val, decon->addr + DECON_WINCONx(win));
> +
> + /* shadow update enable */
> + val = readl(decon->addr + DECON_SHADOWCON);
> + val &= ~SHADOWCON_Wx_PROTECT(win);
> + writel(val, decon->addr + DECON_SHADOWCON);
> +
> + /* standalone update */
> + val = readl(decon->addr + DECON_UPDATE);
> + val |= STANDALONE_UPDATE_F;
> + writel(val, decon->addr + DECON_UPDATE);
> +}
> +
> +void decon_te_irq_handler(struct exynos_drm_crtc *crtc)
> +{
> + struct exynos_decon *decon = crtc->ctx;
> + u32 val;
> +
> + if (!test_bit(BIT_CLKS_ENABLED, &decon->enabled))
> + return;
> +
> + if (atomic_add_unless(&decon->win_updated, -1, 0)) {
> + /* trigger */
> + val = readl(decon->addr + DECON_TRIGCON);
> + val |= TRIGCON_SWTRIGCMD;
> + writel(val, decon->addr + DECON_TRIGCON);
> + }
> +}
> +
> +static struct exynos_drm_crtc_ops decon_crtc_ops = {
> + .dpms = decon_dpms,
> + .enable_vblank = decon_enable_vblank,
> + .disable_vblank = decon_disable_vblank,
> + .commit = decon_commit,
> + .win_mode_set = decon_win_mode_set,
> + .win_commit = decon_win_commit,
> + .win_disable = decon_win_disable,
> + .te_handler = decon_te_irq_handler,
> +};
> +
> +static int decon_bind(struct device *dev, struct device *master, void *data)
> +{
> + struct exynos_decon *decon = dev_get_drvdata(dev);
> + struct drm_device *drm_dev = data;
> + struct exynos_drm_private *priv = drm_dev->dev_private;
> +
> + decon->drm_dev = drm_dev;
> + decon->pipe = priv->pipe++;
> +
> + decon->crtc = exynos_drm_crtc_create(drm_dev, decon->pipe,
> + EXYNOS_DISPLAY_TYPE_LCD, &decon_crtc_ops, decon);
> + if (IS_ERR(decon->crtc))
> + return PTR_ERR(decon->crtc);
Should failing to register the CRTC also decrement priv->pipe?
> +
> + return 0;
> +}
> +
> +static void decon_unbind(struct device *dev, struct device *master, void *data)
> +{
> + struct exynos_decon *decon = dev_get_drvdata(dev);
> +
> + decon_dpms(decon->crtc, DRM_MODE_DPMS_OFF);
> +}
As above, it seems like DPMS will not do enough here.
> +static const struct component_ops decon_component_ops = {
> + .bind = decon_bind,
> + .unbind = decon_unbind,
> +};
> +
> +static irqreturn_t decon_vsync_irq_handler(int irq, void *dev_id)
> +{
> + struct exynos_decon *decon = dev_id;
> + u32 val;
> +
> + if (!test_bit(BIT_CLKS_ENABLED, &decon->enabled))
> + goto out;
> +
> + val = readl(decon->addr + DECON_VIDINTCON1);
> + if (val & VIDINTCON1_INTFRMPEND) {
> + if (decon->drm_dev)
> + drm_handle_vblank(decon->drm_dev, decon->pipe);
If decon->drm_dev is ever NULL, it sounds like something has gone very
seriously wrong.
> + /* clear */
> + writel(VIDINTCON1_INTFRMPEND, decon->addr + DECON_VIDINTCON1);
> + }
> +
> +out:
> + return IRQ_HANDLED;
> +}
> +
> +static irqreturn_t decon_lcd_sys_irq_handler(int irq, void *dev_id)
> +{
> + struct exynos_decon *decon = dev_id;
> + u32 val;
> +
> + if (!test_bit(BIT_CLKS_ENABLED, &decon->enabled))
> + goto out;
> +
> + val = readl(decon->addr + DECON_VIDINTCON1);
> + if (val & VIDINTCON1_INTFRMDONEPEND) {
> + if (decon->drm_dev)
> + exynos_drm_crtc_finish_pageflip(decon->drm_dev,
> + decon->pipe);
Ditto - when would drm_dev be NULL?
> + /* clear */
> + writel(VIDINTCON1_INTFRMDONEPEND,
> + decon->addr + DECON_VIDINTCON1);
> + }
> +
> +out:
> + return IRQ_HANDLED;
> +}
> +
> +static int exynos5433_decon_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct exynos_decon *decon;
> + struct resource *res;
> + int ret;
> + int i;
> +
> + decon = devm_kzalloc(dev, sizeof(*decon), GFP_KERNEL);
> + if (!decon)
> + return -ENOMEM;
> +
> + decon->dev = dev;
> + if (of_get_child_by_name(dev->of_node, "i80-if-timings"))
> + decon->i80_if = true;
> +
> + for (i = 0; i < ARRAY_SIZE(decon_clks_name); i++) {
> + struct clk *clk;
> +
> + clk = devm_clk_get(decon->dev, decon_clks_name[i]);
> + if (IS_ERR(clk))
> + return PTR_ERR(clk);
> +
> + decon->clks[i] = clk;
> + }
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (!res) {
> + dev_err(dev, "cannot find IO resource\n");
> + return -ENXIO;
> + }
> +
> + decon->addr = devm_ioremap_resource(dev, res);
> + if (IS_ERR(decon->addr)) {
> + dev_err(dev, "ioremap failed\n");
> + return PTR_ERR(decon->addr);
> + }
> +
> + res = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
> + decon->i80_if ? "lcd_sys" : "vsync");
> + if (!res) {
> + dev_err(dev, "cannot find IRQ resource\n");
> + return -ENXIO;
> + }
> +
> + ret = devm_request_irq(dev, res->start, decon->i80_if ?
> + decon_lcd_sys_irq_handler : decon_vsync_irq_handler, 0,
> + "drm_decon", decon);
> + if (ret < 0) {
> + dev_err(dev, "lcd_sys irq request failed\n");
> + return ret;
> + }
> +
> + ret = exynos_drm_component_add(dev, EXYNOS_DEVICE_TYPE_CRTC,
> + EXYNOS_DISPLAY_TYPE_LCD);
> + if (ret < 0)
> + return ret;
> +
> + platform_set_drvdata(pdev, decon);
> +
> + ret = component_add(dev, &decon_component_ops);
> + if (ret < 0) {
> + exynos_drm_component_del(dev, EXYNOS_DEVICE_TYPE_CRTC);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int exynos5433_decon_remove(struct platform_device *pdev)
> +{
> + component_del(&pdev->dev, &decon_component_ops);
> + exynos_drm_component_del(&pdev->dev, EXYNOS_DEVICE_TYPE_CRTC);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id exynos5433_decon_driver_dt_match[] = {
> + { .compatible = "samsung,exynos5433-decon" },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, exynos5433_decon_driver_dt_match);
> +
> +struct platform_driver exynos5433_decon_driver = {
> + .probe = exynos5433_decon_probe,
> + .remove = exynos5433_decon_remove,
> + .driver = {
> + .name = "exynos5433-decon",
> + .owner = THIS_MODULE,
> + .of_match_table = exynos5433_decon_driver_dt_match,
> + },
> +};
> diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.c b/drivers/gpu/drm/exynos/exynos_drm_drv.c
> index 98a239a..1fa0dd0 100644
> --- a/drivers/gpu/drm/exynos/exynos_drm_drv.c
> +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.c
> @@ -556,6 +556,9 @@ static struct platform_driver *const exynos_drm_kms_drivers[] = {
> #ifdef CONFIG_DRM_EXYNOS_FIMD
> &fimd_driver,
> #endif
> +#ifdef CONFIG_DRM_EXYNOS5433_DECON
> + &exynos5433_decon_driver,
> +#endif
> #ifdef CONFIG_DRM_EXYNOS7_DECON
> &decon_driver,
> #endif
> diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.h b/drivers/gpu/drm/exynos/exynos_drm_drv.h
> index 9afd390..40996d8 100644
> --- a/drivers/gpu/drm/exynos/exynos_drm_drv.h
> +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.h
> @@ -344,6 +344,7 @@ void exynos_drm_component_del(struct device *dev,
> enum exynos_drm_device_type dev_type);
>
> extern struct platform_driver fimd_driver;
> +extern struct platform_driver exynos5433_decon_driver;
> extern struct platform_driver decon_driver;
> extern struct platform_driver dp_driver;
> extern struct platform_driver dsi_driver;
> diff --git a/drivers/gpu/drm/exynos/regs-exynos5433-decon.h b/drivers/gpu/drm/exynos/regs-exynos5433-decon.h
> new file mode 100644
> index 0000000..9e7f851
> --- /dev/null
> +++ b/drivers/gpu/drm/exynos/regs-exynos5433-decon.h
> @@ -0,0 +1,163 @@
> +/*
> + * Copyright (C) 2014 Samsung Electronics Co.Ltd
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundationr
> + */
> +
> +#ifndef EXYNOS_REGS_DECON_H
> +#define EXYNOS_REGS_DECON_H
> +
> +/* Exynos543X DECON */
> +#define DECON_VIDCON0 0x0000
> +#define DECON_VIDOUTCON0 0x0010
> +#define DECON_WINCONx(n) (0x0020 + ((n) * 4))
> +#define DECON_VIDOSDxH(n) (0x0080 + ((n) * 4))
> +#define DECON_SHADOWCON 0x00A0
> +#define DECON_VIDOSDxA(n) (0x00B0 + ((n) * 0x20))
> +#define DECON_VIDOSDxB(n) (0x00B4 + ((n) * 0x20))
> +#define DECON_VIDOSDxC(n) (0x00B8 + ((n) * 0x20))
> +#define DECON_VIDOSDxD(n) (0x00BC + ((n) * 0x20))
> +#define DECON_VIDOSDxE(n) (0x00C0 + ((n) * 0x20))
> +#define DECON_VIDW0xADD0B0(n) (0x0150 + ((n) * 0x10))
> +#define DECON_VIDW0xADD0B1(n) (0x0154 + ((n) * 0x10))
> +#define DECON_VIDW0xADD0B2(n) (0x0158 + ((n) * 0x10))
> +#define DECON_VIDW0xADD1B0(n) (0x01A0 + ((n) * 0x10))
> +#define DECON_VIDW0xADD1B1(n) (0x01A4 + ((n) * 0x10))
> +#define DECON_VIDW0xADD1B2(n) (0x01A8 + ((n) * 0x10))
> +#define DECON_VIDW0xADD2(n) (0x0200 + ((n) * 4))
> +#define DECON_LOCALxSIZE(n) (0x0214 + ((n) * 4))
> +#define DECON_VIDINTCON0 0x0220
> +#define DECON_VIDINTCON1 0x0224
> +#define DECON_WxKEYCON0(n) (0x0230 + ((n - 1) * 8))
> +#define DECON_WxKEYCON1(n) (0x0234 + ((n - 1) * 8))
> +#define DECON_WxKEYALPHA(n) (0x0250 + ((n - 1) * 4))
> +#define DECON_WINxMAP(n) (0x0270 + ((n) * 4))
> +#define DECON_QOSLUT07_00 0x02C0
> +#define DECON_QOSLUT15_08 0x02C4
> +#define DECON_QOSCTRL 0x02C8
> +#define DECON_BLENDERQx(n) (0x0300 + ((n - 1) * 4))
> +#define DECON_BLENDCON 0x0310
> +#define DECON_OPE_VIDW0xADD0(n) (0x0400 + ((n) * 4))
> +#define DECON_OPE_VIDW0xADD1(n) (0x0414 + ((n) * 4))
> +#define DECON_FRAMEFIFO_REG7 0x051C
> +#define DECON_FRAMEFIFO_REG8 0x0520
> +#define DECON_FRAMEFIFO_STATUS 0x0524
> +#define DECON_CMU 0x1404
> +#define DECON_UPDATE 0x1410
> +#define DECON_UPDATE_SCHEME 0x1438
> +#define DECON_VIDCON1 0x2000
> +#define DECON_VIDCON2 0x2004
> +#define DECON_VIDCON3 0x2008
> +#define DECON_VIDCON4 0x200C
> +#define DECON_VIDTCON2 0x2028
> +#define DECON_FRAME_SIZE 0x2038
> +#define DECON_LINECNT_OP_THRESHOLD 0x203C
> +#define DECON_TRIGCON 0x2040
> +#define DECON_TRIGSKIP 0x2050
> +#define DECON_CRCRDATA 0x20B0
> +#define DECON_CRCCTRL 0x20B4
> +
> +/* Exynos5430 DECON */
> +#define DECON_VIDTCON0 0x2020
> +#define DECON_VIDTCON1 0x2024
> +
> +/* Exynos5433 DECON */
> +#define DECON_VIDTCON00 0x2010
> +#define DECON_VIDTCON01 0x2014
> +#define DECON_VIDTCON10 0x2018
> +#define DECON_VIDTCON11 0x201C
> +
> +/* Exynos543X DECON Internal */
> +#define DECON_W013DSTREOCON 0x0320
> +#define DECON_W233DSTREOCON 0x0324
> +#define DECON_FRAMEFIFO_REG0 0x0500
> +#define DECON_ENHANCER_CTRL 0x2100
> +
> +/* Exynos543X DECON TV */
> +#define DECON_VCLKCON0 0x0014
> +#define DECON_VIDINTCON2 0x0228
> +#define DECON_VIDINTCON3 0x022C
Yes, my impression was that DECON supported both internal and
external, i.e. would replace both FIMD/Mixer. This patch only supports
the internal interface: are you planning to add support for the
external/TV/HDMI interface as well? If so, how does this work with the
DT format you have defined? Should there maybe separate decon-int and
decon-tv subnodes, each of which create one CRTC? The Android tree
seems to rely on static configuration, but presumably we would need a
much more nuanced approach.
If so, it seems like the first start would be to add a basic DECON
binding which covered the entire controller, and then as a next step
add support for decon-int as a subdevice of this.
Cheers,
Daniel
> +/* VIDCON0 */
> +#define VIDCON0_ENVID (1 << 1)
> +#define VIDCON0_ENVID_F (1 << 0)
> +
> +/* VIDOUTCON0 */
> +#define VIDOUT_LCD_ON (1 << 24)
> +#define VIDOUT_IF_F_MASK (0x3 << 20)
> +#define VIDOUT_RGB_IF (0x0 << 20)
> +#define VIDOUT_COMMAND_IF (0x2 << 20)
> +
> +/* WINCONx */
> +#define WINCONx_HAWSWP_F (1 << 16)
> +#define WINCONx_WSWP_F (1 << 15)
> +#define WINCONx_BURSTLEN_MASK (0x3 << 10)
> +#define WINCONx_BURSTLEN_16WORD (0x0 << 10)
> +#define WINCONx_BURSTLEN_8WORD (0x1 << 10)
> +#define WINCONx_BURSTLEN_4WORD (0x2 << 10)
> +#define WINCONx_BLD_PIX_F (1 << 6)
> +#define WINCONx_BPPMODE_MASK (0xf << 2)
> +#define WINCONx_BPPMODE_16BPP_565 (0x5 << 2)
> +#define WINCONx_BPPMODE_16BPP_A1555 (0x6 << 2)
> +#define WINCONx_BPPMODE_16BPP_I1555 (0x7 << 2)
> +#define WINCONx_BPPMODE_24BPP_888 (0xb << 2)
> +#define WINCONx_BPPMODE_24BPP_A1887 (0xc << 2)
> +#define WINCONx_BPPMODE_25BPP_A1888 (0xd << 2)
> +#define WINCONx_BPPMODE_32BPP_A8888 (0xd << 2)
> +#define WINCONx_BPPMODE_16BPP_A4444 (0xe << 2)
> +#define WINCONx_ALPHA_SEL_F (1 << 1)
> +#define WINCONx_ENWIN_F (1 << 0)
> +
> +/* SHADOWCON */
> +#define SHADOWCON_Wx_PROTECT(n) (1 << (10 + (n)))
> +
> +/* VIDOSDxD */
> +#define VIDOSD_Wx_ALPHA_R_F(n) (((n) & 0xff) << 16)
> +#define VIDOSD_Wx_ALPHA_G_F(n) (((n) & 0xff) << 8)
> +#define VIDOSD_Wx_ALPHA_B_F(n) (((n) & 0xff) << 0)
> +
> +/* VIDINTCON0 */
> +#define VIDINTCON0_FRAMEDONE (1 << 17)
> +#define VIDINTCON0_INTFRMEN (1 << 12)
> +#define VIDINTCON0_INTEN (1 << 0)
> +
> +/* VIDINTCON1 */
> +#define VIDINTCON1_INTFRMDONEPEND (1 << 2)
> +#define VIDINTCON1_INTFRMPEND (1 << 1)
> +#define VIDINTCON1_INTFIFOPEND (1 << 0)
> +
> +/* DECON_CMU */
> +#define CMU_CLKGAGE_MODE_SFR_F (1 << 1)
> +#define CMU_CLKGAGE_MODE_MEM_F (1 << 0)
> +
> +/* DECON_UPDATE */
> +#define STANDALONE_UPDATE_F (1 << 0)
> +
> +/* DECON_VIDTCON00 */
> +#define VIDTCON00_VBPD_F(x) (((x) & 0xfff) << 16)
> +#define VIDTCON00_VFPD_F(x) ((x) & 0xfff)
> +
> +/* DECON_VIDTCON01 */
> +#define VIDTCON01_VSPW_F(x) (((x) & 0xfff) << 16)
> +
> +/* DECON_VIDTCON10 */
> +#define VIDTCON10_HBPD_F(x) (((x) & 0xfff) << 16)
> +#define VIDTCON10_HFPD_F(x) ((x) & 0xfff)
> +
> +/* DECON_VIDTCON11 */
> +#define VIDTCON11_HSPW_F(x) (((x) & 0xfff) << 16)
> +
> +/* DECON_VIDTCON2 */
> +#define VIDTCON2_LINEVAL(x) (((x) & 0xfff) << 16)
> +#define VIDTCON2_HOZVAL(x) ((x) & 0xfff)
> +
> +/* TRIGCON */
> +#define TRIGCON_TRIGEN_PER_F (1 << 31)
> +#define TRIGCON_TRIGEN_F (1 << 30)
> +#define TRIGCON_TE_AUTO_MASK (1 << 29)
> +#define TRIGCON_SWTRIGCMD (1 << 1)
> +#define TRIGCON_SWTRIGEN (1 << 0)
> +
> +#endif /* EXYNOS_REGS_DECON_H */
> --
> 1.9.1
>
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/dri-devel
More information about the dri-devel
mailing list