Radeon Verde displayport failure.

[Deucher, Alexander]

> -----Original Message-----
> From: Dave Jones [mailto:davej at codemonkey.org.uk]
> Sent: Thursday, May 07, 2015 7:48 PM
> To: dri-devel at lists.freedesktop.org
> Cc: Deucher, Alexander; Koenig, Christian
> Subject: Radeon Verde displayport failure.
> 
> I just bought a new radeon (1002:682c), to pair with my shiny new displayport
> monitor.
> It shows a display during through the BIOS POST, and grub, but when the
> kernel
> starts up, it's a coin toss whether or not I get anything.
> Sometimes it just goes straight into power saving.
> 
> When I do get something on the console, it continues to boot and then X
> starts up and
> puts it into power saving too. Trying to flip back to tty1 doesn't light up the
> display again.
> 
> I'm running On debian stable, with copied-by-hand verde_* firmware files
> from the linux-firmware git tree.
> Here's a log from the 4.0-rc2 kernel.
> 
> Any other info I can provide ?
> 

The link training with the monitor seems to fail periodically.  You may have to play with the timing in the link training sequence.  It looks like you also have some power management related issues.  Does booting with radeon.dpm=0 on the kernel command line in grub help?  Also does the monitor support audio?  You might also try radeon.audio=0.

Alex

> 	Dave
> 
> 
> 
> [drm] register mmio base: 0xFBE00000
> [drm] register mmio size: 262144
> radeon 0000:01:00.0: Invalid ROM contents
> ATOM BIOS: C755
> radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 -
> 0x000000007FFFFFFF (2048M used)
> radeon 0000:01:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF
> [drm] Detected VRAM RAM=2048M, BAR=256M
> [drm] RAM width 128bits DDR
> [TTM] Zone  kernel: Available graphics memory: 16400232 kiB
> [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
> [TTM] Initializing pool allocator
> [TTM] Initializing DMA pool allocator
> [drm] radeon: 2048M of VRAM memory ready
> [drm] radeon: 1024M of GTT memory ready.
> [drm] Loading verde Microcode
> [drm] Internal thermal controller with fan control
> [drm] probing gen 2 caps for device 8086:2f08 = 77a3103/e
> input: HDA ATI HDMI HDMI as
> /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card0/input4
> input: HDA ATI HDMI HDMI as
> /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card0/input5
> [drm] radeon: dpm initialized
> [drm] GART: num cpu pages 262144, num gpu pages 262144
> [drm] probing gen 2 caps for device 8086:2f08 = 77a3103/e
> [drm] PCIE gen 3 link speeds already enabled
> [drm] PCIE GART of 1024M enabled (table at 0x0000000000277000).
> radeon 0000:01:00.0: WB enabled
> radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00
> and cpu addr 0xffff880807d0ac00
> radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04
> and cpu addr 0xffff880807d0ac04
> radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08
> and cpu addr 0xffff880807d0ac08
> radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c
> and cpu addr 0xffff880807d0ac0c
> radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10
> and cpu addr 0xffff880807d0ac10
> radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18
> and cpu addr 0xffffc90001035a18
> [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
> [drm] Driver supports precise vblank timestamp query.
> radeon 0000:01:00.0: radeon: MSI limited to 32-bit
> radeon 0000:01:00.0: radeon: using MSI.
> [drm] radeon: irq initialized.
> [drm] ring test on 0 succeeded in 1 usecs
> [drm] ring test on 1 succeeded in 1 usecs
> [drm] ring test on 2 succeeded in 1 usecs
> [drm] ring test on 3 succeeded in 9 usecs
> [drm] ring test on 4 succeeded in 3 usecs
> [drm] ring test on 5 succeeded in 2 usecs
> [drm] UVD initialized successfully.
> [drm] ib test on ring 0 succeeded in 0 usecs
> [drm] ib test on ring 1 succeeded in 0 usecs
> [drm] ib test on ring 2 succeeded in 0 usecs
> [drm] ib test on ring 3 succeeded in 0 usecs
> [drm] ib test on ring 4 succeeded in 0 usecs
> [drm] ib test on ring 5 succeeded
> [drm] Radeon Display Connectors
> [drm] Connector 0:
> [drm]   DP-1
> [drm]   HPD4
> [drm]   DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
> [drm]   Encoders:
> [drm]     DFP1: INTERNAL_UNIPHY2
> [drm] Connector 1:
> [drm]   DP-2
> [drm]   HPD5
> [drm]   DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
> [drm]   Encoders:
> [drm]     DFP2: INTERNAL_UNIPHY1
> [drm] Connector 2:
> [drm]   DP-3
> [drm]   HPD1
> [drm]   DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
> [drm]   Encoders:
> [drm]     DFP3: INTERNAL_UNIPHY1
> [drm] Connector 3:
> [drm]   DP-4
> [drm]   HPD2
> [drm]   DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c
> [drm]   Encoders:
> [drm]     DFP4: INTERNAL_UNIPHY
> [drm:si_dpm_set_power_state [radeon]] *ERROR* si_enable_smc_cac
> failed
> [drm] fb mappable at 0xD047A000
> [drm] vram apper at 0xD0000000
> [drm] size 3145728
> [drm] fb depth is 24
> [drm]    pitch is 4096
> fbcon: radeondrmfb (fb0) is primary device
> [drm:si_dpm_set_power_state [radeon]] *ERROR* si_enable_smc_cac
> failed
> [drm:radeon_dp_link_train [radeon]] *ERROR* displayport link status failed
> [drm:radeon_dp_link_train [radeon]] *ERROR* clock recovery failed
> Console: switching to colour frame buffer device 128x48
> radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
> radeon 0000:01:00.0: registered panic notifier
> [drm] Initialized radeon 2.42.0 20080528 for 0000:01:00.0 on minor 0
> [drm:radeon_dp_link_train [radeon]] *ERROR* displayport link status failed
> [drm:radeon_dp_link_train [radeon]] *ERROR* clock recovery failed