[alsa-devel] [PATCH 12/13] drm: bridge/dw_hdmi-ahb-audio: add audio driver
Anssi Hannula
anssi.hannula at iki.fi
Sat May 9 10:55:10 PDT 2015
09.05.2015, 20:40, Russell King - ARM Linux kirjoitti:
> On Sat, May 09, 2015 at 08:07:45PM +0300, Anssi Hannula wrote:
>> 09.05.2015, 19:55, Russell King - ARM Linux kirjoitti:
>>> On Sat, May 09, 2015 at 07:49:44PM +0300, Anssi Hannula wrote:
>>>> (Of course having userspace set them requires that the device has a
>>>> proper entry in /usr/share/alsa/cards and the pcm device is accessed via
>>>> the standard "hdmi" or "iec958" device names which perform the channel
>>>> status word setup. I guess the ARM SoC stuff generally doesn't bother
>>>> with that, explaining a bit why some kernel drivers set them by themselves).
>>>
>>> I'm not sure that's sufficient - I haven't yet found where in the ALSA
>>> userspace, the AES bits are appropriately set according to the sample
>>> rate.
>>
>> Right, that is left to the applications (e.g. VLC and Kodi do that). I'm
>> under the impression that sinks do not normally care about this value,
>> though, but that could just be because most desktop HW sets it by
>> themselves.
>
> No, that seems totally wrong to me.
>
> What if you open the device using aplay? Or pulseaudio? Or madplay?
> Or another audio application which thinks it's addressing a standard
> PCM device.
Then, unless the driver or HW sets it, it is not set.
> Why should every audio user have some code in it to generate the IEC
> bits?
Yeah, it makes zero sense of course, I wasn't claiming otherwise (sorry
if it seemed like it).
> Even VLC _doesn't_ if it's outputting to a standard audio - in other
> words, if you don't tick the SPDIF direct output option which defaults
> to disabled (which, when enabled, opens the device passing the AES
> bits _and_ permits it to send a compressed audio stream.) I've looked
> at this in VLC many times...
That is my understanding as well. Same for pulseaudio, it doesn't set
any AES bits except for passthrough (and most other applications never
set them).
> I think you're a little confused about what userspace does here.
--
Anssi Hannula
More information about the dri-devel
mailing list