[PATCH] drm/bridge/ptn3460: use flags argument of devm_gpiod_get to set direction

Uwe Kleine-König u.kleine-koenig at pengutronix.de
Tue May 19 00:15:56 PDT 2015


Since 39b2bbe3d715 (gpio: add flags argument to gpiod_get*() functions)
which appeared in v3.17-rc1, the gpiod_get* functions take an additional
parameter that allows to specify direction and initial value for output.

Use this to simplify the driver. Furthermore this is one caller less
that stops us making the flags argument to gpiod_get*() mandatory.

Fixes: af478d8823a7 ("drm/bridge: ptn3460: use gpiod interface")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
---
 drivers/gpu/drm/bridge/ptn3460.c | 23 +++++++----------------
 1 file changed, 7 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/bridge/ptn3460.c b/drivers/gpu/drm/bridge/ptn3460.c
index 9d2f053382e1..c70abbe166b6 100644
--- a/drivers/gpu/drm/bridge/ptn3460.c
+++ b/drivers/gpu/drm/bridge/ptn3460.c
@@ -330,32 +330,23 @@ static int ptn3460_probe(struct i2c_client *client,
 
 	ptn_bridge->client = client;
 
-	ptn_bridge->gpio_pd_n = devm_gpiod_get(&client->dev, "powerdown");
+	ptn_bridge->gpio_pd_n = devm_gpiod_get(&client->dev, "powerdown",
+					       GPIOD_OUT_HIGH);
 	if (IS_ERR(ptn_bridge->gpio_pd_n)) {
 		ret = PTR_ERR(ptn_bridge->gpio_pd_n);
 		dev_err(dev, "cannot get gpio_pd_n %d\n", ret);
 		return ret;
 	}
 
-	ret = gpiod_direction_output(ptn_bridge->gpio_pd_n, 1);
-	if (ret) {
-		DRM_ERROR("cannot configure gpio_pd_n\n");
-		return ret;
-	}
-
-	ptn_bridge->gpio_rst_n = devm_gpiod_get(&client->dev, "reset");
-	if (IS_ERR(ptn_bridge->gpio_rst_n)) {
-		ret = PTR_ERR(ptn_bridge->gpio_rst_n);
-		DRM_ERROR("cannot get gpio_rst_n %d\n", ret);
-		return ret;
-	}
 	/*
 	 * Request the reset pin low to avoid the bridge being
 	 * initialized prematurely
 	 */
-	ret = gpiod_direction_output(ptn_bridge->gpio_rst_n, 0);
-	if (ret) {
-		DRM_ERROR("cannot configure gpio_rst_n\n");
+	ptn_bridge->gpio_rst_n = devm_gpiod_get(&client->dev, "reset",
+						GPIOD_OUT_LOW);
+	if (IS_ERR(ptn_bridge->gpio_rst_n)) {
+		ret = PTR_ERR(ptn_bridge->gpio_rst_n);
+		DRM_ERROR("cannot get gpio_rst_n %d\n", ret);
 		return ret;
 	}
 
-- 
2.1.4



More information about the dri-devel mailing list