[PATCH v6 03/12] drm/exynos: atomic phase 1: add .mode_set_nofb() callback

Gustavo Padovan gustavo at padovan.org
Fri May 22 08:33:28 PDT 2015


Hi Joonyoung,

2015-05-22 Joonyoung Shim <jy0922.shim at samsung.com>:

> On 05/22/2015 05:02 AM, Gustavo Padovan wrote:
> > From: Gustavo Padovan <gustavo.padovan at collabora.co.uk>
> > 
> > The new atomic infrastructure needs the .mode_set_nofb() callback to
> > update CRTC timings before setting any plane.
> > 
> > Signed-off-by: Gustavo Padovan <gustavo.padovan at collabora.co.uk>
> > ---
> >  drivers/gpu/drm/exynos/exynos_drm_crtc.c | 60 +++++---------------------------
> >  1 file changed, 9 insertions(+), 51 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/exynos/exynos_drm_crtc.c b/drivers/gpu/drm/exynos/exynos_drm_crtc.c
> > index 61b8cfe..54b74e1 100644
> > --- a/drivers/gpu/drm/exynos/exynos_drm_crtc.c
> > +++ b/drivers/gpu/drm/exynos/exynos_drm_crtc.c
> > @@ -81,59 +81,16 @@ exynos_drm_crtc_mode_fixup(struct drm_crtc *crtc,
> >  	return true;
> >  }
> >  
> > -static int
> > -exynos_drm_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode,
> > -			  struct drm_display_mode *adjusted_mode, int x, int y,
> > -			  struct drm_framebuffer *old_fb)
> > -{
> > -	struct drm_framebuffer *fb = crtc->primary->fb;
> > -	unsigned int crtc_w;
> > -	unsigned int crtc_h;
> > -	int ret;
> > -
> > -	/*
> > -	 * copy the mode data adjusted by mode_fixup() into crtc->mode
> > -	 * so that hardware can be seet to proper mode.
> > -	 */
> > -	memcpy(&crtc->mode, adjusted_mode, sizeof(*adjusted_mode));
> 
> This can cause any problem because exynos drm drivers use crtc->mode
> directly as adjusted_mode. It's necessary to consider using
> crtc_state->adjusted_mode in exynos drm drivers.

Yes, we are moving to use adjusted_mode in exynos, see this patch from
Tobias. It makes crtc uses the adjusted_mode instead. So I think it is
okay to remove this memcpy from here.

http://www.spinics.net/lists/linux-samsung-soc/msg44790.html

> 
> Please refer a patch of Daniel Stone using hwmode instead of mode but it
> cannot use for atomic.
> 
> http://lists.freedesktop.org/archives/dri-devel/2015-March/079546.html

> 
> > -
> > -	ret = exynos_check_plane(crtc->primary, fb);
> > -	if (ret < 0)
> > -		return ret;
> > -
> > -	crtc_w = fb->width - x;
> > -	crtc_h = fb->height - y;
> > -	exynos_plane_mode_set(crtc->primary, crtc, fb, 0, 0,
> > -			      crtc_w, crtc_h, x, y, crtc_w, crtc_h);
> > -
> > -	return 0;
> > -}
> > -
> > -static int exynos_drm_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y,
> > -					  struct drm_framebuffer *old_fb)
> > +static void
> > +exynos_drm_crtc_mode_set_nofb(struct drm_crtc *crtc)
> >  {
> >  	struct exynos_drm_crtc *exynos_crtc = to_exynos_crtc(crtc);
> > -	struct drm_framebuffer *fb = crtc->primary->fb;
> > -	unsigned int crtc_w;
> > -	unsigned int crtc_h;
> > -	int ret;
> >  
> > -	/* when framebuffer changing is requested, crtc's dpms should be on */
> > -	if (exynos_crtc->dpms > DRM_MODE_DPMS_ON) {
> > -		DRM_ERROR("failed framebuffer changing request.\n");
> > -		return -EPERM;
> > -	}
> > -
> > -	ret = exynos_check_plane(crtc->primary, fb);
> > -	if (ret)
> > -		return ret;
> > -
> > -	crtc_w = fb->width - x;
> > -	crtc_h = fb->height - y;
> > -	exynos_update_plane(crtc->primary, crtc, fb, 0, 0,
> > -			    crtc_w, crtc_h, x, y, crtc_w, crtc_h);
> > +	if (WARN_ON(!crtc->state))
> > +		return;
> >  
> > -	return 0;
> > +	if (exynos_crtc->ops->commit)
> > +		exynos_crtc->ops->commit(exynos_crtc);
> 
> This will be called again by crtc_funcs->commit from
> drm_crtc_helper_set_mode. It seems to need to remove the call from
> exynos_drm_crtc_commit like below.
> 
> diff --git a/drivers/gpu/drm/exynos/exynos_drm_crtc.c b/drivers/gpu/drm/exynos/exynos_drm_crtc.c
> index 48ccab7..aa981c2 100644
> --- a/drivers/gpu/drm/exynos/exynos_drm_crtc.c
> +++ b/drivers/gpu/drm/exynos/exynos_drm_crtc.c
> @@ -63,9 +63,6 @@ static void exynos_drm_crtc_commit(struct drm_crtc *crtc)
>  
>  	if (exynos_crtc->ops->win_commit)
>  		exynos_crtc->ops->win_commit(exynos_crtc, exynos_plane->zpos);
> -
> -	if (exynos_crtc->ops->commit)
> -		exynos_crtc->ops->commit(exynos_crtc);
>  }

Okay. Removed.

	Gustavo


More information about the dri-devel mailing list