[PATCH v6 11/12] drm/exynos: atomic dpms support
Gustavo Padovan
gustavo at padovan.org
Fri May 22 08:35:04 PDT 2015
Hi Inki,
2015-05-22 Inki Dae <inki.dae at samsung.com>:
> Hi,
>
> On 2015년 05월 22일 05:02, Gustavo Padovan wrote:
> > From: Gustavo Padovan <gustavo.padovan at collabora.co.uk>
> >
> > Run dpms operations through the atomic intefaces. This basically removes
> > the .dpms() callback from econders and crtcs and use .disable() and
> > .enable() to turn the crtc on and off.
> >
> > v2: Address comments by Joonyoung:
> > - make hdmi code call ->disable() instead of ->dpms()
> > - do not use WARN_ON on crtc enable/disable
> >
> > v3: - Fix build failure after the hdmi change in v2
> > - Change dpms helper of ptn3460 bridge
> >
> > Signed-off-by: Gustavo Padovan <gustavo.padovan at collabora.co.uk>
> > ---
> > drivers/gpu/drm/bridge/ps8622.c | 2 +-
> > drivers/gpu/drm/bridge/ptn3460.c | 2 +-
> > drivers/gpu/drm/exynos/exynos_dp_core.c | 2 +-
> > drivers/gpu/drm/exynos/exynos_drm_crtc.c | 99 ++++++++++++++++-------------
> > drivers/gpu/drm/exynos/exynos_drm_dpi.c | 2 +-
> > drivers/gpu/drm/exynos/exynos_drm_drv.h | 4 +-
> > drivers/gpu/drm/exynos/exynos_drm_dsi.c | 2 +-
> > drivers/gpu/drm/exynos/exynos_drm_encoder.c | 27 ++------
> > drivers/gpu/drm/exynos/exynos_drm_vidi.c | 2 +-
> > drivers/gpu/drm/exynos/exynos_hdmi.c | 6 +-
> > 10 files changed, 71 insertions(+), 77 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/bridge/ps8622.c b/drivers/gpu/drm/bridge/ps8622.c
> > index b604326..d686235 100644
> > --- a/drivers/gpu/drm/bridge/ps8622.c
> > +++ b/drivers/gpu/drm/bridge/ps8622.c
> > @@ -499,7 +499,7 @@ static void ps8622_connector_destroy(struct drm_connector *connector)
> > }
> >
> > static const struct drm_connector_funcs ps8622_connector_funcs = {
> > - .dpms = drm_helper_connector_dpms,
> > + .dpms = drm_atomic_helper_connector_dpms,
> > .fill_modes = drm_helper_probe_single_connector_modes,
> > .detect = ps8622_detect,
> > .destroy = ps8622_connector_destroy,
> > diff --git a/drivers/gpu/drm/bridge/ptn3460.c b/drivers/gpu/drm/bridge/ptn3460.c
> > index 8ed3617..260bc9f 100644
> > --- a/drivers/gpu/drm/bridge/ptn3460.c
> > +++ b/drivers/gpu/drm/bridge/ptn3460.c
> > @@ -260,7 +260,7 @@ static void ptn3460_connector_destroy(struct drm_connector *connector)
> > }
> >
> > static struct drm_connector_funcs ptn3460_connector_funcs = {
> > - .dpms = drm_helper_connector_dpms,
> > + .dpms = drm_atomic_helper_connector_dpms,
> > .fill_modes = drm_helper_probe_single_connector_modes,
> > .detect = ptn3460_detect,
> > .destroy = ptn3460_connector_destroy,
> > diff --git a/drivers/gpu/drm/exynos/exynos_dp_core.c b/drivers/gpu/drm/exynos/exynos_dp_core.c
> > index 195fe60..c9995b1 100644
> > --- a/drivers/gpu/drm/exynos/exynos_dp_core.c
> > +++ b/drivers/gpu/drm/exynos/exynos_dp_core.c
> > @@ -954,7 +954,7 @@ static void exynos_dp_connector_destroy(struct drm_connector *connector)
> > }
> >
> > static struct drm_connector_funcs exynos_dp_connector_funcs = {
> > - .dpms = drm_helper_connector_dpms,
> > + .dpms = drm_atomic_helper_connector_dpms,
> > .fill_modes = drm_helper_probe_single_connector_modes,
> > .detect = exynos_dp_detect,
> > .destroy = exynos_dp_connector_destroy,
> > diff --git a/drivers/gpu/drm/exynos/exynos_drm_crtc.c b/drivers/gpu/drm/exynos/exynos_drm_crtc.c
> > index 3251652..92a5595 100644
> > --- a/drivers/gpu/drm/exynos/exynos_drm_crtc.c
> > +++ b/drivers/gpu/drm/exynos/exynos_drm_crtc.c
> > @@ -22,51 +22,57 @@
> > #include "exynos_drm_encoder.h"
> > #include "exynos_drm_plane.h"
> >
> > -static void exynos_drm_crtc_dpms(struct drm_crtc *crtc, int mode)
> > +static void exynos_drm_crtc_enable(struct drm_crtc *crtc)
> > {
> > struct exynos_drm_crtc *exynos_crtc = to_exynos_crtc(crtc);
> > + struct exynos_drm_plane *exynos_plane = to_exynos_plane(crtc->primary);
> >
> > - DRM_DEBUG_KMS("crtc[%d] mode[%d]\n", crtc->base.id, mode);
> > -
> > - if (exynos_crtc->dpms == mode) {
> > - DRM_DEBUG_KMS("desired dpms mode is same as previous one.\n");
> > + if (exynos_crtc->enabled)
> > return;
> > - }
> > -
> > - if (mode > DRM_MODE_DPMS_ON) {
> > - /* wait for the completion of page flip. */
> > - if (!wait_event_timeout(exynos_crtc->pending_flip_queue,
> > - (exynos_crtc->event == NULL), HZ/20))
> > - exynos_crtc->event = NULL;
> > - drm_crtc_vblank_off(crtc);
> > - }
> >
> > if (exynos_crtc->ops->dpms)
> > - exynos_crtc->ops->dpms(exynos_crtc, mode);
> > + exynos_crtc->ops->dpms(exynos_crtc, DRM_MODE_DPMS_ON);
> >
> > - exynos_crtc->dpms = mode;
> > + exynos_crtc->enabled = true;
> >
> > - if (mode == DRM_MODE_DPMS_ON)
> > - drm_crtc_vblank_on(crtc);
> > -}
> > + drm_crtc_vblank_on(crtc);
> >
> > -static void exynos_drm_crtc_prepare(struct drm_crtc *crtc)
> > -{
> > - /* drm framework doesn't check NULL. */
> > + if (exynos_crtc->ops->win_commit)
> > + exynos_crtc->ops->win_commit(exynos_crtc, exynos_plane->zpos);
> > +
> > + if (exynos_crtc->ops->commit)
> > + exynos_crtc->ops->commit(exynos_crtc);
>
> crtc commit already was called by mode_set_nofb callback as soon as it
> disables crtc and encoder devices so I think unnecessary. Please see the
> drm_atomic_helper_commit_modeset_disable function.
This is already gone for v7, see my comments on
[PATCH v6 03/12] drm/exynos: atomic phase 1: add .mode_set_nofb() callback
Gustavo
More information about the dri-devel
mailing list