[PATCH] drm/msm/hdmi: Use pinctrl in HDMI driver

Stephane Viau sviau at codeaurora.org
Fri May 29 06:49:45 PDT 2015


Some targets (eg: msm8994) use the pinctrl framework to configure
interface pins. This change adds support for initialization and
pinctrl active/sleep state control for the HDMI driver.

Signed-off-by: Stephane Viau <sviau at codeaurora.org>
---
 drivers/gpu/drm/msm/hdmi/hdmi.c           | 25 +++++++++++++++++++++++++
 drivers/gpu/drm/msm/hdmi/hdmi.h           |  5 +++++
 drivers/gpu/drm/msm/hdmi/hdmi_connector.c | 31 +++++++++++++++++++++++++++++++
 3 files changed, 61 insertions(+)

diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c b/drivers/gpu/drm/msm/hdmi/hdmi.c
index 8145362..6120666 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.c
@@ -354,6 +354,20 @@ static int get_gpio(struct device *dev, struct device_node *of_node, const char
 	}
 	return gpio;
 }
+
+static struct pinctrl_state *get_pinctrl_state(struct device *dev,
+		struct pinctrl *pinctrl, const char *name)
+{
+	struct pinctrl_state *state = pinctrl_lookup_state(pinctrl, name);
+
+	if (IS_ERR_OR_NULL(state)) {
+		dev_err(dev, "failed to get pinctrl state \"%s\" (%ld)",
+					name, PTR_ERR(state));
+		return NULL;
+	}
+
+	return state;
+}
 #endif
 
 static int hdmi_bind(struct device *dev, struct device *master, void *data)
@@ -365,6 +379,7 @@ static int hdmi_bind(struct device *dev, struct device *master, void *data)
 #ifdef CONFIG_OF
 	struct device_node *of_node = dev->of_node;
 	const struct of_device_id *match;
+	struct pinctrl *pinctrl;
 
 	match = of_match_node(dt_match, of_node);
 	if (match && match->data) {
@@ -383,6 +398,16 @@ static int hdmi_bind(struct device *dev, struct device *master, void *data)
 	hdmi_cfg->mux_sel_gpio  = get_gpio(dev, of_node, "qcom,hdmi-tx-mux-sel");
 	hdmi_cfg->mux_lpm_gpio  = get_gpio(dev, of_node, "qcom,hdmi-tx-mux-lpm");
 
+	/* not all targets have pinctrl, do not fail in case of error: */
+	pinctrl = devm_pinctrl_get(dev);
+	if (IS_ERR_OR_NULL(pinctrl)) {
+		dev_warn(dev, "cannot get pinctrl: %s\n", of_node->name);
+	} else {
+		hdmi_cfg->active  = get_pinctrl_state(dev, pinctrl, "hdmi_active");
+		hdmi_cfg->sleep   = get_pinctrl_state(dev, pinctrl, "hdmi_sleep");
+		hdmi_cfg->pinctrl = pinctrl;
+		DBG("pinctrl initialized.");
+	}
 #else
 	static struct hdmi_platform_config config = {};
 	static const char *hpd_clk_names[] = {
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.h b/drivers/gpu/drm/msm/hdmi/hdmi.h
index a155c4a..4742df2 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.h
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.h
@@ -22,6 +22,7 @@
 #include <linux/clk.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
+#include <linux/pinctrl/consumer.h>
 #include <linux/hdmi.h>
 
 #include "msm_drv.h"
@@ -95,6 +96,10 @@ struct hdmi_platform_config {
 	/* gpio's: */
 	int ddc_clk_gpio, ddc_data_gpio, hpd_gpio, mux_en_gpio, mux_sel_gpio;
 	int mux_lpm_gpio;
+
+	/* pinctrl: */
+	struct pinctrl *pinctrl;
+	struct pinctrl_state *active, *sleep;
 };
 
 void hdmi_set_mode(struct hdmi *hdmi, bool power_on);
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_connector.c b/drivers/gpu/drm/msm/hdmi/hdmi_connector.c
index 914bf95..6bbda54 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi_connector.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi_connector.c
@@ -181,6 +181,23 @@ error1:
 	return ret;
 }
 
+static int pinctrl_config(struct hdmi *hdmi, bool on)
+{
+	struct drm_device *dev = hdmi->dev;
+	const struct hdmi_platform_config *config = hdmi->config;
+	struct pinctrl_state *state = on ? config->active : config->sleep;
+	int ret;
+
+	ret = pinctrl_select_state(config->pinctrl, state);
+	if (ret)
+		dev_err(dev->dev, "failed to set pinctrl state to %s: %d\n",
+				on ? "active" : "sleep", ret);
+
+	DBG("pinctrl %s", on ? "on" : "off");
+
+	return ret;
+}
+
 static int hpd_enable(struct hdmi_connector *hdmi_connector)
 {
 	struct hdmi *hdmi = hdmi_connector->hdmi;
@@ -199,6 +216,14 @@ static int hpd_enable(struct hdmi_connector *hdmi_connector)
 		}
 	}
 
+	if (config->pinctrl) {
+		ret = pinctrl_config(hdmi, true);
+		if (ret) {
+			dev_err(dev->dev, "can't configure pinctrl: %d\n", ret);
+			goto fail;
+		}
+	}
+
 	ret = gpio_config(hdmi, true);
 	if (ret) {
 		dev_err(dev->dev, "failed to configure GPIOs: %d\n", ret);
@@ -268,6 +293,12 @@ static void hdp_disable(struct hdmi_connector *hdmi_connector)
 	if (ret)
 		dev_warn(dev->dev, "failed to unconfigure GPIOs: %d\n", ret);
 
+	if (config->pinctrl) {
+		ret = pinctrl_config(hdmi, false);
+		if (ret)
+			dev_warn(dev->dev, "can't configure pinctrl: %d\n", ret);
+	}
+
 	for (i = 0; i < config->hpd_reg_cnt; i++) {
 		ret = regulator_disable(hdmi->hpd_regs[i]);
 		if (ret)
-- 
Qualcomm Innovation Center, Inc.

The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project



More information about the dri-devel mailing list