[PATCH v2 1/2] drm/panel: Add Sharp LS043T1LE01 panel binding documentation

[Rob Herring]

On Fri, Oct 30, 2015 at 5:34 PM, Bjorn Andersson
<bjorn.andersson at sonymobile.com> wrote:
> From: Werner Johansson <werner.johansson at sonymobile.com>
>
> Signed-off-by: Werner Johansson <werner.johansson at sonymobile.com>
> Signed-off-by: Bjorn Andersson <bjorn.andersson at sonymobile.com>

Acked-by: Rob Herring <robh at kernel.org>

> ---
>
> Change since v1:
> - Dropped -vid suffix from compatible
>
>  .../bindings/display/panel/sharp,ls043t1le01.txt   | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.txt
>
> diff --git a/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.txt b/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.txt
> new file mode 100644
> index 000000000000..b3d4e073930a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.txt
> @@ -0,0 +1,22 @@
> +Sharp Microelectronics 4.3" qHD TFT LCD panel
> +
> +Required properties:
> +- compatible: should be "sharp,ls043t1le01-qhd"
> +- reg: DSI virtual channel of the peripheral
> +- power-supply: phandle of the regulator that provides the supply voltage
> +
> +Optional properties:
> +- backlight: phandle of the backlight device attached to the panel
> +- reset-gpios: a GPIO spec for the reset pin
> +
> +Example:
> +
> +       mdss_dsi at fd922800 {
> +               panel at 0 {
> +                       compatible = "sharp,ls043t1le01-qhd";
> +                       reg = <0>;
> +                       avdd-supply = <&pm8941_l22>;
> +                       backlight = <&pm8941_wled>;
> +                       reset-gpios = <&pm8941_gpios 19 GPIO_ACTIVE_HIGH>;
> +               };
> +       };
> --
> 2.4.2
>