[RFC v5 01/12] dt-bindings: drm/mediatek: Add Mediatek display subsystem dts binding
Rob Herring
robh at kernel.org
Wed Nov 4 19:28:06 PST 2015
On Wed, Nov 04, 2015 at 12:44:58PM +0100, Philipp Zabel wrote:
> From: CK Hu <ck.hu at mediatek.com>
>
> Add device tree binding documentation for the display subsystem in
> Mediatek MT8173 SoCs.
>
> Signed-off-by: CK Hu <ck.hu at mediatek.com>
> Signed-off-by: Philipp Zabel <p.zabel at pengutronix.de>
If this wasn't an RFC, I'd ack it. :) One thing you missed below though.
> ---
> Changes since v4:
> - Move device tree binding documentation to
> Documentation/devicetree/bindings/display/mediatek
> - Clarified display function block nodes are siblings to mmsys
> ---
> .../bindings/display/mediatek/mediatek,disp.txt | 183 +++++++++++++++++++++
> .../bindings/display/mediatek/mediatek,dpi.txt | 35 ++++
> .../bindings/display/mediatek/mediatek,dsi.txt | 53 ++++++
> 3 files changed, 271 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
> create mode 100644 Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
> create mode 100644 Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
>
> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
> new file mode 100644
> index 0000000..cc3d884
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
> @@ -0,0 +1,183 @@
> +Mediatek display subsystem
> +==========================
> +
> +The Mediatek display subsystem consists of various DISP function blocks in the
> +MMSYS register space. The connections between them can be configured by output
> +and input selectors in the MMSYS_CONFIG register space and register updates can
> +be synchronized to video frame boundaries with help of a DISP_MUTEX function
> +block.
> +
> +All DISP device tree nodes must be siblings to the central MMSYS_CONFIG node.
> +For a description of the MMSYS_CONFIG binding, see
> +Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt.
> +
> +DISP function blocks
> +====================
> +
> +A display stream starts at a source function block that reads pixel data from
> +memory and ends with a sink function block that drives pixels on a display
> +interface, or writes pixels back to memory. All DISP function blocks have
> +their own register space, interrupt, and clock gate. The blocks that can
> +access memory additionally have to list the IOMMU and local arbiter they are
> +connected to.
> +
> +For a description of the display interface sink function blocks, see
> +Documentation/devicetree/bindings/drm/mediatek/mediatek,dsi.txt and
> +Documentation/devicetree/bindings/drm/mediatek/mediatek,dpi.txt.
Need to update these paths.
> +
> +Required properties (all function blocks):
> +- compatible: "mediatek,<chip>-disp-<function>", one of
> + "mediatek,<chip>-disp-ovl" - overlay (4 layers, blending, csc)
> + "mediatek,<chip>-disp-rdma" - read DMA / line buffer
> + "mediatek,<chip>-disp-wdma" - write DMA
> + "mediatek,<chip>-disp-color" - color processor
> + "mediatek,<chip>-disp-aal" - adaptive ambient light controller
> + "mediatek,<chip>-disp-gamma" - gamma correction
> + "mediatek,<chip>-disp-ufoe" - data compression engine
> + "mediatek,<chip>-dsi" - DSI controller, see mediatek,dsi.txt
> + "mediatek,<chip>-dpi" - DPI controller, see mediatek,dpi.txt
> + "mediatek,<chip>-disp-mutex" - display mutex
> + "mediatek,<chip>-disp-od" - overdrive
> +- reg: Physical base address and length of the function block register space
> +- interrupts: The interrupt signal from the function block.
> +- clocks: device clocks
> + See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
> +- compatible: "mediatek,<chip>-ddp"
> +
> +Required properties (DMA function blocks):
> +- compatible: Should be one of
> + "mediatek,<chip>-disp-ovl"
> + "mediatek,<chip>-disp-rdma"
> + "mediatek,<chip>-disp-wdma"
> +- larb: Should contain a phandle pointing to the local arbiter device as defined
> + in Documentation/devicetree/bindings/soc/mediatek/mediatek,smi-larb.txt
> +- iommus: required a iommu node
> +
> +Examples:
> +
> +mmsys: clock-controller at 14000000 {
> + compatible = "mediatek,mt8173-mmsys", "syscon";
> + reg = <0 0x14000000 0 0x1000>;
> + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
> + #clock-cells = <1>;
> +};
> +
> +ovl0: ovl at 1400c000 {
> + compatible = "mediatek,mt8173-disp-ovl";
> + reg = <0 0x1400c000 0 0x1000>;
> + interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&mmsys CLK_MM_DISP_OVL0>;
> + iommus = <&iommu M4U_LARB0_ID M4U_PORT_DISP_OVL0>;
> + mediatek,larb = <&larb0>;
> +};
> +
> +ovl1: ovl at 1400d000 {
> + compatible = "mediatek,mt8173-disp-ovl";
> + reg = <0 0x1400d000 0 0x1000>;
> + interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&mmsys CLK_MM_DISP_OVL1>;
> + iommus = <&iommu M4U_LARB4_ID M4U_PORT_DISP_OVL1>;
> + mediatek,larb = <&larb4>;
> +};
> +
> +rdma0: rdma at 1400e000 {
> + compatible = "mediatek,mt8173-disp-rdma";
> + reg = <0 0x1400e000 0 0x1000>;
> + interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&mmsys CLK_MM_DISP_RDMA0>;
> + iommus = <&iommu M4U_LARB0_ID M4U_PORT_DISP_RDMA0>;
> + mediatek,larb = <&larb0>;
> +};
> +
> +rdma1: rdma at 1400f000 {
> + compatible = "mediatek,mt8173-disp-rdma";
> + reg = <0 0x1400f000 0 0x1000>;
> + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&mmsys CLK_MM_DISP_RDMA1>;
> + iommus = <&iommu M4U_LARB4_ID M4U_PORT_DISP_RDMA1>;
> + mediatek,larb = <&larb4>;
> +};
> +
> +rdma2: rdma at 14010000 {
> + compatible = "mediatek,mt8173-disp-rdma";
> + reg = <0 0x14010000 0 0x1000>;
> + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&mmsys CLK_MM_DISP_RDMA2>;
> + iommus = <&iommu M4U_LARB4_ID M4U_PORT_DISP_RDMA2>;
> + mediatek,larb = <&larb4>;
> +};
> +
> +wdma0: wdma at 14011000 {
> + compatible = "mediatek,mt8173-disp-wdma";
> + reg = <0 0x14011000 0 0x1000>;
> + interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&mmsys CLK_MM_DISP_WDMA0>;
> + iommus = <&iommu M4U_LARB0_ID M4U_PORT_DISP_WDMA0>;
> + mediatek,larb = <&larb0>;
> +};
> +
> +wdma1: wdma at 14012000 {
> + compatible = "mediatek,mt8173-disp-wdma";
> + reg = <0 0x14012000 0 0x1000>;
> + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&mmsys CLK_MM_DISP_WDMA1>;
> + iommus = <&iommu M4U_LARB4_ID M4U_PORT_DISP_WDMA1>;
> + mediatek,larb = <&larb4>;
> +};
> +
> +color0: color at 14013000 {
> + compatible = "mediatek,mt8173-disp-color";
> + reg = <0 0x14013000 0 0x1000>;
> + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&mmsys CLK_MM_DISP_COLOR0>;
> +};
> +
> +color1: color at 14014000 {
> + compatible = "mediatek,mt8173-disp-color";
> + reg = <0 0x14014000 0 0x1000>;
> + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&mmsys CLK_MM_DISP_COLOR1>;
> +};
> +
> +aal at 14015000 {
> + compatible = "mediatek,mt8173-disp-aal";
> + reg = <0 0x14015000 0 0x1000>;
> + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&mmsys CLK_MM_DISP_AAL>;
> +};
> +
> +gamma at 14016000 {
> + compatible = "mediatek,mt8173-disp-gamma";
> + reg = <0 0x14016000 0 0x1000>;
> + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&mmsys CLK_MM_DISP_GAMMA>;
> +};
> +
> +ufoe at 1401a000 {
> + compatible = "mediatek,mt8173-disp-ufoe";
> + reg = <0 0x1401a000 0 0x1000>;
> + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&mmsys CLK_MM_DISP_UFOE>;
> +};
> +
> +dsi0: dsi at 1401b000 {
> + /* See mediatek,dsi.txt for details */
> +};
> +
> +dpi0: dpi at 1401d000 {
> + /* See mediatek,dpi.txt for details */
> +};
> +
> +mutex: mutex at 14020000 {
> + compatible = "mediatek,mt8173-disp-mutex";
> + reg = <0 0x14020000 0 0x1000>;
> + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_LOW>;
> + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
> + clocks = <&mmsys CLK_MM_MUTEX_32K>;
> +};
> +
> +od at 14023000 {
> + compatible = "mediatek,mt8173-disp-od";
> + reg = <0 0x14023000 0 0x1000>;
> + clocks = <&mmsys CLK_MM_DISP_OD>;
> +};
> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
> new file mode 100644
> index 0000000..b6a7e73
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
> @@ -0,0 +1,35 @@
> +Mediatek DPI Device
> +===================
> +
> +The Mediatek DPI function block is a sink of the display subsystem and
> +provides 8-bit RGB/YUV444 or 8/10/10-bit YUV422 pixel data on a parallel
> +output bus.
> +
> +Required properties:
> +- compatible: "mediatek,<chip>-dpi"
> +- reg: Physical base address and length of the controller's registers
> +- interrupts: The interrupt signal from the function block.
> +- clocks: device clocks
> + See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
> +- clock-names: must contain "pixel", "engine", and "pll"
> +- port: Output port node with endpoint definitions as described in
> + Documentation/devicetree/bindings/graph.txt. This port should be connected
> + to the input port of an attached HDMI or LVDS encoder chip.
> +
> +Example:
> +
> +dpi0: dpi at 1401d000 {
> + compatible = "mediatek,mt8173-dpi";
> + reg = <0 0x1401d000 0 0x1000>;
> + interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&mmsys CLK_MM_DPI_PIXEL>,
> + <&mmsys CLK_MM_DPI_ENGINE>,
> + <&apmixedsys CLK_APMIXED_TVDPLL>;
> + clock-names = "pixel", "engine", "pll";
> +
> + port {
> + dpi0_out: endpoint {
> + remote-endpoint = <&hdmi0_in>;
> + };
> + };
> +};
> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> new file mode 100644
> index 0000000..afa7afb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> @@ -0,0 +1,53 @@
> +Mediatek DSI Device
> +===================
> +
> +The Mediatek DSI function block is a sink of the display subsystem and can
> +drive up to 4-lane MIPI DSI output. Two DSIs can be synchronized for dual-
> +channel output.
> +
> +Required properties:
> +- compatible: "mediatek,<chip>-dsi"
> +- reg: Physical base address and length of the controller's registers
> +- interrupts: The interrupt signal from the function block.
> +- clocks: device clocks
> + See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
> +- clock-names: must contain "engine" and "digital".
> +- phys: phandle link to the MIPI D-PHY controller.
> +- phy-names: must contain "dphy"
> +- port: Output port node with endpoint definitions as described in
> + Documentation/devicetree/bindings/graph.txt. This port should be connected
> + to the input port of an attached DSI panel or DSI-to-eDP encoder chip.
> +
> +MIPI TX Configuration Module
> +============================
> +
> +The MIPI TX configuration module controls the MIPI D-PHY.
> +
> +Required properties:
> +- compatible: "mediatek,<chip>-mipi-tx"
> +- reg: Physical base address and length of the controller's registers
> +- #phy-cells: must be <0>.
> +
> +Example:
> +
> +mipi_tx0: mipi-dphy at 10215000 {
> + compatible = "mediatek,mt8173-mipi-tx";
> + reg = <0 0x10215000 0 0x1000>;
> + #phy-cells = <0>;
> +};
> +
> +dsi0: dsi at 1401b000 {
> + compatible = "mediatek,mt8173-dsi";
> + reg = <0 0x1401b000 0 0x1000>;
> + interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&mmsys MM_DSI0_ENGINE>, <&mmsys MM_DSI0_DIGITAL>;
> + clock-names = "engine", "digital";
> + phys = <&mipi_tx0>;
> + phy-names = "dphy";
> +
> + port {
> + dsi0_out: endpoint {
> + remote-endpoint = <&panel_in>;
> + };
> + };
> +};
> --
> 2.6.1
>
More information about the dri-devel
mailing list