Mobility Radeon HD 4530/4570/545v: flicker in 1920x1080

[Christian König]

On 04.11.2015 23:13, Alex Deucher wrote:
> On Wed, Nov 4, 2015 at 5:10 PM, Pavel Machek <pavel at ucw.cz> wrote:
>> Hi!
>>
>>>>>>> index dac78ad..b86f06a 100644
>>>>>>> --- a/drivers/gpu/drm/radeon/atombios_crtc.c
>>>>>>> +++ b/drivers/gpu/drm/radeon/atombios_crtc.c
>>>>>>> @@ -569,6 +569,8 @@ static u32 atombios_adjust_pll(struct drm_crtc *crtc,
>>>>>>>          radeon_crtc->pll_flags = 0;
>>>>>>>
>>>>>>>          if (ASIC_IS_AVIVO(rdev)) {
>>>>>>> +               radeon_crtc->pll_flags |= RADEON_PLL_PREFER_MINM_OVER_MAXP;
>>>>>>> +
>>>>>>>                  if ((rdev->family == CHIP_RS600) ||
>>>>>>>                      (rdev->family == CHIP_RS690) ||
>>>>>>>                      (rdev->family == CHIP_RS740))
>>>>>>>
>>>>>> Help.. maybe... it is tricky to tell. It definitely does _not_ fix the
>>>>>> issue completely.
>>>>> You could also try the old pll algorithm:
>>>> I reverted the patch above, and switched to the old algorithm.
>>>>
>>>> The flicker is still there. (But maybe its less horrible, like with
>>>> RADEON_PLL_PREFER_MINM_OVER_MAXP).
>>> The flickering would vanish completely if that's the reason for the issue
>>> you are seeing.
>>> Try setting ref_div_min and ref_div_max to 2 in
>>>   radeon_compute_pll_avivo().
>> Ok, I did this, but no luck, still flickers. But the flicker only
>> happens when something changes on screen, like dragging a big
>> window. Is that consistent with wrong PLL timings?
> Does it go away with radeon.dpm=0?  Sounds more like either memory
> reclocking happening outside of vblank, or underflow to the display
> controllers.

Sounds like my suspicion was right, that doesn't seem to be a PLL issue 
after all.

Just to rule out the obvious your system works fine with windows and you 
don't have a extra long cable for the monitor or something like this?

Regards,
Christian.

>
> Alex
>
>> diff --git a/config.32 b/config.32
>> index 00e5dd2..4734158 100644
>> --- a/config.32
>> +++ b/config.32
>> @@ -1090,7 +1090,7 @@ CONFIG_DEVTMPFS_MOUNT=y
>>   CONFIG_PREVENT_FIRMWARE_BUILD=y
>>   CONFIG_FW_LOADER=y
>>   CONFIG_FIRMWARE_IN_KERNEL=y
>> -CONFIG_EXTRA_FIRMWARE="radeon/R700_rlc.bin"
>> +CONFIG_EXTRA_FIRMWARE="radeon/R700_rlc.bin radeon/RV710_smc.bin radeon/RV710_uvd.bin"
>>   CONFIG_EXTRA_FIRMWARE_DIR="/lib/firmware"
>>   # CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
>>   CONFIG_ALLOW_DEV_COREDUMP=y
>> diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c
>> index dac78ad..dcc4f4d 100644
>> --- a/drivers/gpu/drm/radeon/atombios_crtc.c
>> +++ b/drivers/gpu/drm/radeon/atombios_crtc.c
>> @@ -569,6 +569,8 @@ static u32 atombios_adjust_pll(struct drm_crtc *crtc,
>>          radeon_crtc->pll_flags = 0;
>>
>>          if (ASIC_IS_AVIVO(rdev)) {
>> +               //radeon_crtc->pll_flags |= RADEON_PLL_PREFER_MINM_OVER_MAXP;
>> +
>>                  if ((rdev->family == CHIP_RS600) ||
>>                      (rdev->family == CHIP_RS690) ||
>>                      (rdev->family == CHIP_RS740))
>> diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c
>> index 6743174..bebaf4f 100644
>> --- a/drivers/gpu/drm/radeon/radeon_display.c
>> +++ b/drivers/gpu/drm/radeon/radeon_display.c
>> @@ -947,6 +947,7 @@ void radeon_compute_pll_avivo(struct radeon_pll *pll,
>>          fb_div_max = pll->max_feedback_div;
>>
>>          if (pll->flags & RADEON_PLL_USE_FRAC_FB_DIV) {
>> +               printk("radeon: fractional divider\n");
>>                  fb_div_min *= 10;
>>                  fb_div_max *= 10;
>>          }
>> @@ -966,6 +967,9 @@ void radeon_compute_pll_avivo(struct radeon_pll *pll,
>>          else
>>                  ref_div_max = pll->max_ref_div;
>>
>> +       ref_div_min = 2;
>> +       ref_div_max = 2;
>> +
>>          /* determine allowed post divider range */
>>          if (pll->flags & RADEON_PLL_USE_POST_DIV) {
>>                  post_div_min = pll->post_div;
>> @@ -1020,6 +1024,8 @@ void radeon_compute_pll_avivo(struct radeon_pll *pll,
>>                  diff = abs(target_clock - (pll->reference_freq * fb_div) /
>>                          (ref_div * post_div));
>>
>> +               printk("post_div = %d, diff = %d\n", post_div, diff);
>> +
>>                  if (diff < diff_best || (diff == diff_best &&
>>                      !(pll->flags & RADEON_PLL_PREFER_MINM_OVER_MAXP))) {
>>
>> @@ -1028,6 +1034,7 @@ void radeon_compute_pll_avivo(struct radeon_pll *pll,
>>                  }
>>          }
>>          post_div = post_div_best;
>> +       printk("Selected post_div = %d\n", post_div);
>>
>>          /* get the feedback and reference divider for the optimal value */
>>          avivo_get_fb_ref_div(nom, den, post_div, fb_div_max, ref_div_max,
>> @@ -1062,7 +1069,7 @@ void radeon_compute_pll_avivo(struct radeon_pll *pll,
>>          *ref_div_p = ref_div;
>>          *post_div_p = post_div;
>>
>> -       DRM_DEBUG_KMS("%d - %d, pll dividers - fb: %d.%d ref: %d, post %d\n",
>> +       printk("%d - %d, pll dividers - fb: %d.%d ref: %d, post %d\n",
>>                        freq, *dot_clock_p * 10, *fb_div_p, *frac_fb_div_p,
>>                        ref_div, post_div);
>>   }
>>
>>
>>> But I'm not 100% convinced that this is actually a PLL problem, try to
>>> compile the firmware it complains about into the kernel as well.
>> Did that, too.
>>
>> Best regards,
>>                                                                          Pavel
>> --
>> (english) http://www.livejournal.com/~pavelmachek
>> (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html