Mobility Radeon HD 4530/4570/545v: flicker in 1920x1080

Pavel Machek pavel at ucw.cz
Fri Nov 6 04:45:54 PST 2015


On Fri 2015-11-06 11:25:09, Michel Dänzer wrote:
> On 06.11.2015 05:23, Pavel Machek wrote:
> > Hi!
> > 
> >>>> The flickering would vanish completely if that's the reason for the issue
> >>>> you are seeing.
> >>>
> >>>> Try setting ref_div_min and ref_div_max to 2 in
> >>>>  radeon_compute_pll_avivo().
> >>>
> >>> Ok, I did this, but no luck, still flickers. But the flicker only
> >>> happens when something changes on screen, like dragging a big
> >>> window. Is that consistent with wrong PLL timings?
> >>
> >> Does it go away with radeon.dpm=0?  Sounds more like either memory
> >> reclocking happening outside of vblank, or underflow to the display
> >> controllers.
> > 
> > No, it does not:
> > 
> > pavel at half:~$ cat /proc/cmdline
> > BOOT_IMAGE=(hd0,2)/l/linux/arch/x86/boot/bzImage root=/dev/sda4
> > resume=/dev/sda1 radeon.dpm=0
> > 
> > ..and same issue. And yes, it looks like an underflow to me. How can I
> > debug reclocking / underflows?
> 
> Does radeon.disp_priority=2 help?

Tried this, and no change, still flickers.

pavel at half:~$ cat /proc/cmdline
BOOT_IMAGE=(hd0,2)/l/linux/arch/x86/boot/bzImage root=/dev/sda4
resume=/dev/sda1 radeon.dpm=0 radeon.disp_priority=2
pavel at half:~$

I searched for some more config options, and tried:

pavel at half:~$ cat /proc/cmdline
BOOT_IMAGE=(hd0,2)/l/linux/arch/x86/boot/bzImage root=/dev/sda4
resume=/dev/sda1 radeon.dpm=0 radeon.disp_priority=2
radeon.amdgpu_runtime_pm=0 radeon.bapm=0 radeon.sched_hw_submission=0
radeon.enable_semaphores=0
pavel at half:~$

..still flickers.

Best regards,
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html


More information about the dri-devel mailing list