[Intel-gfx] [PATCH v8 2/2] drm/dp: Set aux.dev to the drm_connector device, instead of drm_device.

Ville Syrjälä ville.syrjala at linux.intel.com
Tue Nov 24 12:31:41 PST 2015


On Mon, Nov 02, 2015 at 12:33:48PM -0800, Rafael Antognolli wrote:
> So far, the i915 driver and some other drivers set it to the drm_device,
> which doesn't allow one to know which DP a given aux channel is related
> to. Changing this to be the drm_connector provides proper nesting, still
> allowing one to get the drm_device from it. Some drivers already set it
> to the drm_connector.
> 
> This also removes the need to add a sysfs link for the i2c device under
> the connector, as it will already be there.
> 
> Signed-off-by: Rafael Antognolli <rafael.antognolli at intel.com>

I gave aux_dev a bit of a testing here, and it appaers to work quite
splendidly.

This patch however causes lots of WARN spew if I unload the driver
while in middle of dumping the DPCD via the aux_dev. It appears we
we clean up things the wrong order now.

> ---
>  drivers/gpu/drm/i915/intel_dp.c | 19 ++-----------------
>  1 file changed, 2 insertions(+), 17 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index 8287df4..7aacc08 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -1078,36 +1078,21 @@ intel_dp_aux_init(struct intel_dp *intel_dp, struct intel_connector *connector)
>  		intel_dp->aux_ch_ctl_reg = intel_dp->output_reg + 0x10;
>  
>  	intel_dp->aux.name = name;
> -	intel_dp->aux.dev = dev->dev;
> +	intel_dp->aux.dev = connector->base.kdev;
>  	intel_dp->aux.transfer = intel_dp_aux_transfer;
>  
>  	DRM_DEBUG_KMS("registering %s bus for %s\n", name,
>  		      connector->base.kdev->kobj.name);
>  
>  	ret = drm_dp_aux_register(&intel_dp->aux);
> -	if (ret < 0) {
> +	if (ret < 0)
>  		DRM_ERROR("drm_dp_aux_register() for %s failed (%d)\n",
>  			  name, ret);
> -		return;
> -	}
> -
> -	ret = sysfs_create_link(&connector->base.kdev->kobj,
> -				&intel_dp->aux.ddc.dev.kobj,
> -				intel_dp->aux.ddc.dev.kobj.name);
> -	if (ret < 0) {
> -		DRM_ERROR("sysfs_create_link() for %s failed (%d)\n", name, ret);
> -		drm_dp_aux_unregister(&intel_dp->aux);
> -	}
>  }
>  
>  static void
>  intel_dp_connector_unregister(struct intel_connector *intel_connector)
>  {
> -	struct intel_dp *intel_dp = intel_attached_dp(&intel_connector->base);
> -
> -	if (!intel_connector->mst_port)
> -		sysfs_remove_link(&intel_connector->base.kdev->kobj,
> -				  intel_dp->aux.ddc.dev.kobj.name);
>  	intel_connector_unregister(intel_connector);
>  }
>  
> -- 
> 2.4.3
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel OTC


More information about the dri-devel mailing list