[PATCH 1/9] drm: bridge/dw_hdmi-ahb-audio: add audio driver

[Russell King - ARM Linux]

On Fri, Oct 09, 2015 at 01:02:11PM -0300, Fabio Estevam wrote:
> On Fri, Oct 9, 2015 at 1:00 PM, Russell King - ARM Linux
> <linux at arm.linux.org.uk> wrote:
> 
> >> Thanks, Russell!
> >>
> >> Got audio to play on my HDMI TV :-)
> >>
> >> For the entire series:
> >>
> >> Tested-by: Fabio Estevam <fabio.estevam at freescale.com>
> >
> > Just to confirm - that's for _all_ of these 8 patches, including the
> > changes to the ACR code in the last four patches, and you're happy that
> > I send all of these:
> >
> > drm: bridge/dw_hdmi-ahb-audio: add audio driver
> > drm: bridge/dw_hdmi-ahb-audio: parse ELD from HDMI driver
> > drm: bridge/dw_hdmi-ahb-audio: basic support for multi-channel PCM audio
> > drm: bridge/dw_hdmi-ahb-audio: allow larger buffer sizes
> > drm: bridge/dw_hdmi: avoid being recursive in N calculation
> > drm: bridge/dw_hdmi: adjust pixel clock values in N calculation
> > drm: bridge/dw_hdmi: remove ratio support from ACR code
> > drm: bridge/dw_hdmi: replace CTS calculation for the ACR
> 
> That's correct. Thanks, Russell

Thanks.  I'll drop that set into linux-next tonight, along with the TDA998x
and Armada DRM patches that haven't seen an airing there yet - before asking
David to pull them next week (the timescale has slipped...)

-- 
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.