[PATCH v3 3/7] drm/vc4: Add KMS support for Raspberry Pi.
Stefan Wahren
info at lategoodbye.de
Sun Oct 11 07:02:12 PDT 2015
Hi Eric,
Am 09.10.2015 um 23:27 schrieb Eric Anholt:
> This is enough for fbcon and bringing up X using
> xf86-video-modesetting. It doesn't support the 3D accelerator or
> power management yet.
>
> Signed-off-by: Eric Anholt <eric at anholt.net>
> Acked-by: Daniel Vetter <daniel.vetter at ffwll.ch>
> ---
>
> v2: Drop FB_HELPER select thanks to Archit's patches. Do manual init
> ordering instead of using the .load hook. Structure registration
> more like tegra's, but still using the typical "component" code.
> Drop no-op hooks for atomic_begin and mode_fixup() now that
> they're optional. Drop sentinel in Makefile. Fix minor style
> nits I noticed on another reread.
>
> v3: Use the new bcm2835 clk driver to manage pixel/HSM clocks instead
> of having a fixed video mode. Use exynos-style component driver
> matching instead of devicetree nodes to list the component driver
> instances. Rename compatibility strings to say bcm2835, and
> distinguish pv0/1/2. Clean up some h/vsync code, and add in
> interlaced mode setup. Fix up probe/bind error paths. Use
> bitops.h macros for vc4_regs.h
>
> drivers/gpu/drm/Kconfig | 2 +
> drivers/gpu/drm/Makefile | 1 +
> drivers/gpu/drm/vc4/Kconfig | 13 +
> drivers/gpu/drm/vc4/Makefile | 17 +
> drivers/gpu/drm/vc4/vc4_bo.c | 52 +++
> drivers/gpu/drm/vc4/vc4_crtc.c | 675 ++++++++++++++++++++++++++++++++++++++
> drivers/gpu/drm/vc4/vc4_debugfs.c | 39 +++
> drivers/gpu/drm/vc4/vc4_drv.c | 284 ++++++++++++++++
> drivers/gpu/drm/vc4/vc4_drv.h | 115 +++++++
> drivers/gpu/drm/vc4/vc4_hdmi.c | 588 +++++++++++++++++++++++++++++++++
> drivers/gpu/drm/vc4/vc4_hvs.c | 163 +++++++++
> drivers/gpu/drm/vc4/vc4_kms.c | 54 +++
> drivers/gpu/drm/vc4/vc4_plane.c | 320 ++++++++++++++++++
> drivers/gpu/drm/vc4/vc4_regs.h | 570 ++++++++++++++++++++++++++++++++
> 14 files changed, 2893 insertions(+)
> create mode 100644 drivers/gpu/drm/vc4/Kconfig
> create mode 100644 drivers/gpu/drm/vc4/Makefile
> create mode 100644 drivers/gpu/drm/vc4/vc4_bo.c
> create mode 100644 drivers/gpu/drm/vc4/vc4_crtc.c
> create mode 100644 drivers/gpu/drm/vc4/vc4_debugfs.c
> create mode 100644 drivers/gpu/drm/vc4/vc4_drv.c
> create mode 100644 drivers/gpu/drm/vc4/vc4_drv.h
> create mode 100644 drivers/gpu/drm/vc4/vc4_hdmi.c
> create mode 100644 drivers/gpu/drm/vc4/vc4_hvs.c
> create mode 100644 drivers/gpu/drm/vc4/vc4_kms.c
> create mode 100644 drivers/gpu/drm/vc4/vc4_plane.c
> create mode 100644 drivers/gpu/drm/vc4/vc4_regs.h
>
> diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
> index 1a0a8df..c4bf9a1 100644
> --- a/drivers/gpu/drm/Kconfig
> +++ b/drivers/gpu/drm/Kconfig
> @@ -264,3 +264,5 @@ source "drivers/gpu/drm/sti/Kconfig"
> source "drivers/gpu/drm/amd/amdkfd/Kconfig"
>
> source "drivers/gpu/drm/imx/Kconfig"
> +
> +source "drivers/gpu/drm/vc4/Kconfig"
> diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
> index 45e7719..0edc9e2 100644
> --- a/drivers/gpu/drm/Makefile
> +++ b/drivers/gpu/drm/Makefile
> @@ -42,6 +42,7 @@ obj-$(CONFIG_DRM_MGA) += mga/
> obj-$(CONFIG_DRM_I810) += i810/
> obj-$(CONFIG_DRM_I915) += i915/
> obj-$(CONFIG_DRM_MGAG200) += mgag200/
> +obj-$(CONFIG_DRM_VC4) += vc4/
> obj-$(CONFIG_DRM_CIRRUS_QEMU) += cirrus/
> obj-$(CONFIG_DRM_SIS) += sis/
> obj-$(CONFIG_DRM_SAVAGE)+= savage/
> diff --git a/drivers/gpu/drm/vc4/Kconfig b/drivers/gpu/drm/vc4/Kconfig
> new file mode 100644
> index 0000000..e810ef7
> --- /dev/null
> +++ b/drivers/gpu/drm/vc4/Kconfig
> @@ -0,0 +1,13 @@
> +config DRM_VC4
> + tristate "Broadcom VC4 Graphics"
> + depends on ARCH_BCM2835
depends on (ARCH_BCM2835 || COMPILE_TEST) ?
> + depends on DRM
> + select DRM_KMS_HELPER
> + select DRM_KMS_CMA_HELPER
> + help
> + Choose this option if you have a system that has a Broadcom
> + VC4 GPU, such as the Raspberry Pi or other BCM2708/BCM2835.
> +
> + This driver requires that "avoid_warnings=2" be present in
> + the config.txt for the firmware, to keep it from smashing
> + our display setup.
> + [...]
> +static void vc4_crtc_disable(struct drm_crtc *crtc)
> +{
> + struct drm_device *dev = crtc->dev;
> + struct vc4_dev *vc4 = to_vc4_dev(dev);
> + struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
> + u32 chan = vc4_crtc->channel;
> +
> + require_hvs_enabled(dev);
> +
> + CRTC_WRITE(PV_V_CONTROL,
> + CRTC_READ(PV_V_CONTROL) & ~PV_VCONTROL_VIDEN);
> + while (CRTC_READ(PV_V_CONTROL) & PV_VCONTROL_VIDEN)
> + cpu_relax();
> +
> + /* Without a wait here, we end up with a black screen. */
> + msleep(30);
This looks a little bit strange. First we do a busy loop without any
timeout and then a fixed msleep without reason for the exact duration.
Sorry for the possibly dumb questions:
Is it safe to read PV_V_CONTROL exactly after writing to them? No
sleeping required?
How did you come to the 30 milli seconds?
> + [...]
> diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
> new file mode 100644
> index 0000000..ae37fec
> --- /dev/null
> +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
> @@ -0,0 +1,588 @@
> +/*
> + * Copyright (C) 2015 Broadcom
> + * Copyright (c) 2014 The Linux Foundation. All rights reserved.
> + * Copyright (C) 2013 Red Hat
> + * Author: Rob Clark <robdclark at gmail.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +/**
> + * DOC: VC4 Falcon HDMI module
> + *
> + * The HDMI core has a state machine and a PHY. Most of the unit
> + * operates off of the HSM clock from CPRMAN. It also internally uses
> + * the PLLH_PIX clock for the PHY.
> + */
> +
> +#include "drm_atomic_helper.h"
> +#include "drm_crtc_helper.h"
> +#include "drm_edid.h"
> +#include "linux/clk.h"
> +#include "linux/component.h"
#include "linux/i2c.h" ?
> +#include "linux/of_gpio.h"
> +#include "linux/of_platform.h"
> +#include "vc4_drv.h"
> +#include "vc4_regs.h"
> +
> +/* General HDMI hardware state. */
> +struct vc4_hdmi {
> + struct platform_device *pdev;
> +
> + struct drm_encoder *encoder;
> + struct drm_connector *connector;
> +
> + struct i2c_adapter *ddc;
> + void __iomem *hdmicore_regs;
> + void __iomem *hd_regs;
> + int hpd_gpio;
> +
> + struct clk *pixel_clock;
> + struct clk *hsm_clock;
> +};
> +
Best regards
Stefan
More information about the dri-devel
mailing list