[Bug 106341] New: radeon - monitors fail to sync with modes with vertical refresh rate under 60 Hz on FirePro V4800
bugzilla-daemon at bugzilla.kernel.org
bugzilla-daemon at bugzilla.kernel.org
Tue Oct 20 05:08:30 PDT 2015
https://bugzilla.kernel.org/show_bug.cgi?id=106341
Bug ID: 106341
Summary: radeon - monitors fail to sync with modes with
vertical refresh rate under 60 Hz on FirePro V4800
Product: Drivers
Version: 2.5
Kernel Version: 4.3.0-rc6
Hardware: All
OS: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: Video(DRI - non Intel)
Assignee: drivers_video-dri at kernel-bugs.osdl.org
Reporter: tim at seoss.co.uk
Regression: No
With newer kernels, display resolutions under 60Hz the attached monitors (tried
multiple with multiple modes on DVI and display port) fail to sync.
Working kernel: 3.16.0-4-amd64 (Debian)
Non working: 4.1.0 (Debian), and 4.3.0-rc6 (mainline).
My main monitor is a 4k resolution monitor which will only supports 30Hz at the
default full native resolution.
[ 14.102283] [drm] radeon kernel modesetting enabled.
[ 14.103946] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 -
0x000000003FFFFFFF (1024M used)
[ 14.104022] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 -
0x000000007FFFFFFF
[ 14.105476] [drm] radeon: 1024M of VRAM memory ready
[ 14.105672] [drm] radeon: 1024M of GTT memory ready.
[ 14.108782] radeon 0000:01:00.0: firmware: direct-loading firmware
radeon/REDWOOD_pfp.bin
[ 14.109799] radeon 0000:01:00.0: firmware: direct-loading firmware
radeon/REDWOOD_me.bin
[ 14.114441] radeon 0000:01:00.0: firmware: direct-loading firmware
radeon/REDWOOD_rlc.bin
[ 14.117105] radeon 0000:01:00.0: firmware: direct-loading firmware
radeon/REDWOOD_smc.bin
[ 14.143419] [drm] radeon: dpm initialized
[ 14.144488] radeon 0000:01:00.0: firmware: direct-loading firmware
radeon/CYPRESS_uvd.bin
[ 14.145853] [drm] enabling PCIE gen 2 link speeds, disable with
radeon.pcie_gen2=0
[ 14.154866] radeon 0000:01:00.0: WB enabled
[ 14.154910] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr
0x0000000040000c00 and cpu addr 0xffff88033072ac00
[ 14.154975] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr
0x0000000040000c0c and cpu addr 0xffff88033072ac0c
[ 14.155929] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr
0x000000000005c418 and cpu addr 0xffffc9000241c418
[ 14.156093] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[ 14.156159] radeon 0000:01:00.0: radeon: using MSI.
[ 14.156242] [drm] radeon: irq initialized.
[ 15.443703] fbcon: radeondrmfb (fb0) is primary device
[ 15.669263] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 15.669288] radeon 0000:01:00.0: registered panic notifier
[ 15.679661] [drm] Initialized radeon 2.43.0 20080528 for 0000:01:00.0 on
minor 0
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI]
Redwood XT GL [FirePro V4800] (prog-if 00 [VGA controller])
Subsystem: Dell Device 240a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 49
Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at fbce0000 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at c000 [size=256]
Expansion ROM at fbcc0000 [disabled] [size=128K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1
unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr-
TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Exit
Latency L0s <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x16, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-,
OBFF Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-,
OBFF Disabled
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB,
EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-,
LinkEqualizationRequest-
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000feeff00c Data: 4172
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1
Len=010 <?>
Capabilities: [150 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Kernel driver in use: radeon
--
You are receiving this mail because:
You are watching the assignee of the bug.
More information about the dri-devel
mailing list