[PATCH 5/6] drm/vc4: Make sure that planes aren't scaled.

[Eric Anholt]

We would scan out the memory around them if an upscale was attempted,
and would just scan out incorrectly for downscaling.

Signed-off-by: Eric Anholt <eric at anholt.net>
---

It looks like, while modetest only wants to set scaling on overlay
planes, one could do so on our primary/cursor planes if the fd was in
universal planes mode.

 drivers/gpu/drm/vc4/vc4_plane.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/gpu/drm/vc4/vc4_plane.c b/drivers/gpu/drm/vc4/vc4_plane.c
index 2db5092..887f3ca 100644
--- a/drivers/gpu/drm/vc4/vc4_plane.c
+++ b/drivers/gpu/drm/vc4/vc4_plane.c
@@ -157,6 +157,16 @@ static int vc4_plane_mode_set(struct drm_plane *plane,
 	int crtc_w = state->crtc_w;
 	int crtc_h = state->crtc_h;
 
+	if (state->crtc_w << 16 != state->src_w ||
+	    state->crtc_h << 16 != state->src_h) {
+		/* We don't support scaling yet, which involves
+		 * allocating the LBM memory for scaling temporary
+		 * storage, and putting filter kernels in the HVS
+		 * context.
+		 */
+		return -EINVAL;
+	}
+
 	if (crtc_x < 0) {
 		offset += drm_format_plane_cpp(fb->pixel_format, 0) * -crtc_x;
 		crtc_w += crtc_x;
-- 
2.6.1