[PATCH v2 1/2] drm/panel: Add Sharp LS043T1LE01 panel binding documentation

[Bjorn Andersson]

From: Werner Johansson <werner.johansson at sonymobile.com>

Signed-off-by: Werner Johansson <werner.johansson at sonymobile.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson at sonymobile.com>
---

Change since v1:
- Dropped -vid suffix from compatible

 .../bindings/display/panel/sharp,ls043t1le01.txt   | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.txt

diff --git a/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.txt b/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.txt
new file mode 100644
index 000000000000..b3d4e073930a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.txt
@@ -0,0 +1,22 @@
+Sharp Microelectronics 4.3" qHD TFT LCD panel
+
+Required properties:
+- compatible: should be "sharp,ls043t1le01-qhd"
+- reg: DSI virtual channel of the peripheral
+- power-supply: phandle of the regulator that provides the supply voltage
+
+Optional properties:
+- backlight: phandle of the backlight device attached to the panel
+- reset-gpios: a GPIO spec for the reset pin
+
+Example:
+
+	mdss_dsi at fd922800 {
+		panel at 0 {
+			compatible = "sharp,ls043t1le01-qhd";
+			reg = <0>;
+			avdd-supply = <&pm8941_l22>;
+			backlight = <&pm8941_wled>;
+			reset-gpios = <&pm8941_gpios 19 GPIO_ACTIVE_HIGH>;
+		};
+	};
-- 
2.4.2