[PATCH v4 10/16] phy: Add driver for rockchip Display Port PHY
Yakir Yang
ykk at rock-chips.com
Wed Sep 2 20:25:00 PDT 2015
Hi Rob,
在 09/02/2015 09:27 PM, Rob Herring 写道:
> On Tue, Sep 1, 2015 at 1:04 AM, Yakir Yang <ykk at rock-chips.com> wrote:
>> This phy driver would control the Rockchip DisplayPort module
>> phy clock and phy power, it is relate to analogix_dp-rockchip
>> dp driver. If you want DP works rightly on rockchip platform,
>> then you should select both of them.
>>
>> Signed-off-by: Yakir Yang <ykk at rock-chips.com>
>> ---
>> Changes in v4:
>> - Take Kishon suggest, add commit message, and remove the redundant
>> rockchip_dp_phy_init() function, move those code to probe() method.
>> And remove driver .owner number.
>>
>> Changes in v3:
>> - Take Heiko suggest, add rockchip dp phy driver,
>> collect the phy clocks and power control.
>>
>> Changes in v2: None
>>
>> .../devicetree/bindings/phy/rockchip-dp-phy.txt | 26 ++++
> It is preferred that you split binding doc's from driver changes.
Okay, done.
>> drivers/phy/Kconfig | 7 +
>> drivers/phy/Makefile | 1 +
>> drivers/phy/phy-rockchip-dp.c | 166 +++++++++++++++++++++
>> 4 files changed, 200 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt
>> create mode 100644 drivers/phy/phy-rockchip-dp.c
>>
>> diff --git a/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt
>> new file mode 100644
>> index 0000000..5de1088
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt
>> @@ -0,0 +1,26 @@
>> +Rockchip Soc Seroes Display Port PHY
>> +------------------------------------
>> +
>> +Required properties:
>> +- compatible : should be one of the following supported values:
>> + - "rockchip.rk3288-dp-phy"
>> +
>> +- reg : a list of registers used by phy driver
> Please state the size of the list and order of what each entry if more than one.
Just like Heiko remind, I don't need the reg number anymore,
"rockchip,grf" is enough for this driver.
Anyway thanks :-)
>> +- clocks: from common clock binding: handle to dp clock.
>> + of memory mapped region.
>> +- clock-names: from common clock binding:
>> + Required elements: "sclk_dp" "sclk_dp_24m"
>> +
>> +- rockchip,grf: this soc should set GRF regs, so need get grf here.
> I have no idea what GRF means.
GRF is an module of our IC chip, the full name is General Register Files.
I would rather to pick some words from our TRM.
The general register file will be used to do static set by software, which
is composed of many registers for system control.
>
>> +- #phy-cells : from the generic PHY bindings, must be 0;
>> +
>> +Example:
>> +
>> +edp_phy: phy at ff770274 {
>> + compatilble = "rockchip,rk3288-dp-phy";
>> + reg = <0xff770274 4>;
>> + rockchip,grf = <&grf>;
>> + clocks = <&cru SCLK_EDP_24M>;
>> + clock-names = "24m";
>> + #phy-cells = <0>;
>> +}
>> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
>> index 47da573..8f2bc4f 100644
>> --- a/drivers/phy/Kconfig
>> +++ b/drivers/phy/Kconfig
>> @@ -310,6 +310,13 @@ config PHY_ROCKCHIP_USB
>> help
>> Enable this to support the Rockchip USB 2.0 PHY.
>>
>> +config PHY_ROCKCHIP_DP
>> + tristate "Rockchip Display Port PHY Driver"
>> + depends on ARCH_ROCKCHIP && OF
>> + select GENERIC_PHY
>> + help
>> + Enable this to support the Rockchip Display Port PHY.
>> +
>> config PHY_ST_SPEAR1310_MIPHY
>> tristate "ST SPEAR1310-MIPHY driver"
>> select GENERIC_PHY
>> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
>> index a5b18c1..e281f35 100644
>> --- a/drivers/phy/Makefile
>> +++ b/drivers/phy/Makefile
>> @@ -34,6 +34,7 @@ phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o
>> obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o
>> obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o
>> obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o
>> +obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o
>> obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o
>> obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o
>> obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o
>> diff --git a/drivers/phy/phy-rockchip-dp.c b/drivers/phy/phy-rockchip-dp.c
>> new file mode 100644
>> index 0000000..e9a726e
>> --- /dev/null
>> +++ b/drivers/phy/phy-rockchip-dp.c
>> @@ -0,0 +1,166 @@
>> +/*
>> + * Rockchip DP PHY driver
>> + *
>> + * Copyright (C) 2015 FuZhou Rockchip Co., Ltd.
>> + * Author: Yakir Yang <ykk@@rock-chips.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License.
>> + */
>> +
>> +#include <linux/io.h>
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/of_address.h>
>> +#include <linux/clk.h>
>> +#include <linux/phy/phy.h>
>> +#include <linux/regmap.h>
>> +#include <linux/mfd/syscon.h>
>> +#include <linux/platform_device.h>
>> +
>> +#define GRF_SOC_CON12 0x0274
>> +#define GRF_EDP_REF_CLK_SEL_INTER BIT(4)
>> +
>> +#define DP_PHY_SIDDQ_WRITE_EN BIT(21)
>> +#define DP_PHY_SIDDQ_ON 0
>> +#define DP_PHY_SIDDQ_OFF BIT(5)
>> +
>> +struct rockchip_dp_phy {
>> + struct device *dev;
>> + struct regmap *grf;
>> + void __iomem *regs;
>> + struct clk *phy_24m;
>> +};
>> +
>> +static int rockchip_dp_phy_clk_enable(struct rockchip_dp_phy *dp)
>> +{
>> + int ret = 0;
>> +
>> + ret = clk_set_rate(dp->phy_24m, 24000000);
> Do you need to do this every time? This can go in probe.
Yeah, it could move to probe, thanks.
>> + if (ret < 0) {
>> + dev_err(dp->dev, "cannot set clock phy_24m %d\n", ret);
>> + return ret;
>> + }
>> +
>> + ret = clk_prepare_enable(dp->phy_24m);
>> + if (ret < 0) {
>> + dev_err(dp->dev, "cannot enable clock phy_24m %d\n", ret);
>> + return ret;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int rockchip_dp_phy_clk_disable(struct rockchip_dp_phy *dp)
>> +{
>> + clk_disable_unprepare(dp->phy_24m);
>> +
>> + return 0;
>> +}
>> +
>> +static int rockchip_set_phy_state(struct phy *phy, bool enable)
>> +{
>> + struct rockchip_dp_phy *dp = phy_get_drvdata(phy);
>> +
>> + if (enable) {
>> + rockchip_dp_phy_clk_enable(dp);
>> + writel(DP_PHY_SIDDQ_WRITE_EN | DP_PHY_SIDDQ_ON, dp->regs);
>> + } else {
>> + rockchip_dp_phy_clk_disable(dp);
>> + writel(DP_PHY_SIDDQ_WRITE_EN | DP_PHY_SIDDQ_OFF, dp->regs);
>> + }
>> +
>> + return 0;
>> +}
> I would just inline all 3 of these functions. The wrappers don't
> doesn't do anything, but add 2 levels of function calls.
After move clk_set_rate to probe, I would rather to remove those
wrappers just operate in power_on/power_off directly. :)
>
>> +
>> +static int rockchip_dp_phy_power_on(struct phy *phy)
>> +{
>> + return rockchip_set_phy_state(phy, true);
>> +}
>> +
>> +static int rockchip_dp_phy_power_off(struct phy *phy)
>> +{
>> + return rockchip_set_phy_state(phy, false);
>> +}
>> +
>> +static struct phy_ops rockchip_dp_phy_ops = {
>> + .power_on = rockchip_dp_phy_power_on,
>> + .power_off = rockchip_dp_phy_power_off,
>> + .owner = THIS_MODULE,
>> +};
>> +
>> +static int rockchip_dp_phy_probe(struct platform_device *pdev)
>> +{
>> + struct device *dev = &pdev->dev;
>> + struct device_node *np = dev->of_node;
>> + struct phy_provider *phy_provider;
>> + struct rockchip_dp_phy *dp;
>> + struct resource *res;
>> + struct phy *phy;
>> + int ret;
>> +
>> + dp = devm_kzalloc(dev, sizeof(*dp), GFP_KERNEL);
>> + if (IS_ERR(dp))
>> + return -ENOMEM;
>> +
>> + dp->dev = dev;
>> +
>> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> + dp->regs = devm_ioremap_resource(dev, res);
>> + if (IS_ERR(dp->regs))
>> + return PTR_ERR(dp->regs);
>> +
>> + dp->phy_24m = devm_clk_get(dev, "24m");
>> + if (IS_ERR(dp->phy_24m)) {
>> + dev_err(dev, "cannot get clock 24m\n");
>> + return PTR_ERR(dp->phy_24m);
>> + }
> The binding says there are 2 clocks.
Oh... Document have been little bit old. I used to handle
two kinds of clocks in phy driver in v2, and take Thierry
and Heiko suggest to reduce to one clock in v3, but forget
to improved the Document at the same time.
+- clock-names: from common clock binding:
+ Required elements: "sclk_dp" "sclk_dp_24m"
should be
+- clock-names: from common clock binding:
+ Required elements: "24m"
Thanks for your point out.
>> +
>> + dp->grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
>> + if (IS_ERR(dp->grf)) {
>> + dev_err(dev, "rk3288-dp needs rockchip,grf property\n");
>> + return PTR_ERR(dp->grf);
>> + }
>> +
>> + ret = regmap_write(dp->grf, GRF_SOC_CON12,
>> + GRF_EDP_REF_CLK_SEL_INTER |
>> + (GRF_EDP_REF_CLK_SEL_INTER << 16));
>> + if (ret != 0) {
>> + dev_err(dp->dev, "Could not config GRF edp ref clk: %d\n", ret);
>> + return ret;
>> + }
>> +
>> + phy = devm_phy_create(dev, NULL, &rockchip_dp_phy_ops, NULL);
>> + if (IS_ERR(phy)) {
>> + dev_err(dev, "failed to create phy\n");
>> + return PTR_ERR(phy);
>> + }
>> + phy_set_drvdata(phy, dp);
>> +
>> + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
>> +
>> + return PTR_ERR_OR_ZERO(phy_provider);
>> +}
>> +
>> +static const struct of_device_id rockchip_dp_phy_dt_ids[] = {
>> + { .compatible = "rockchip,rk3288-dp-phy" },
>> + {}
>> +};
>> +
>> +MODULE_DEVICE_TABLE(of, rockchip_dp_phy_dt_ids);
>> +
>> +static struct platform_driver rockchip_dp_phy_driver = {
>> + .probe = rockchip_dp_phy_probe,
>> + .driver = {
>> + .name = "rockchip-dp-phy",
>> + .of_match_table = rockchip_dp_phy_dt_ids,
>> + },
>> +};
>> +
>> +module_platform_driver(rockchip_dp_phy_driver);
>> +
>> +MODULE_AUTHOR("Yakir Yang <ykk at rock-chips.com>");
>> +MODULE_DESCRIPTION("Rockchip DP PHY driver");
>> +MODULE_LICENSE("GPL v2");
>> --
>> 2.1.2
>>
>>
>
>
More information about the dri-devel
mailing list