[RFC v2 1/4] dt-bindings: drm/mediatek: Add Mediatek display subsystem dts binding
Rob Herring
robh at kernel.org
Fri Sep 18 13:33:30 PDT 2015
On Fri, Sep 18, 2015 at 11:11 AM, Philipp Zabel <p.zabel at pengutronix.de> wrote:
> From: CK Hu <ck.hu at mediatek.com>
>
> Add device tree binding documentation for the display subsystem in
> Mediatek MT8173 SoCs.
>
> Signed-off-by: CK Hu <ck.hu at mediatek.com>
> Signed-off-by: Philipp Zabel <p.zabel at pengutronix.de>
> ---
> .../bindings/drm/mediatek/mediatek,disp.txt | 131 +++++++++++++++++++++
> .../bindings/drm/mediatek/mediatek,dsi.txt | 29 +++++
> 2 files changed, 160 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/drm/mediatek/mediatek,disp.txt
> create mode 100644 Documentation/devicetree/bindings/drm/mediatek/mediatek,dsi.txt
>
> diff --git a/Documentation/devicetree/bindings/drm/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/drm/mediatek/mediatek,disp.txt
> new file mode 100644
> index 0000000..a3811bd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/drm/mediatek/mediatek,disp.txt
> @@ -0,0 +1,131 @@
> +Mediatek display subsystem
> +==========================
> +
> +The Mediatek display subsystem consists of various DISP function blocks in the
> +MMSYS register space. The connections between them can be configured by output
> +and input selectors in the MMSYS_CONFIG register space and register updates can
> +be synchronized to video frame boundaries with help of a DISP_MUTEX function
> +block.
> +
> +The display-subsystem node binds together all individual device nodes that
> +comprise the DISP subsystem.
> +
> +Required properties:
> +
> +- compatible: "mediatek,<chip>-disp"
> +- components: Should contain a list of phandles pointing to the DISP function
> + block device nodes.
> +- component-names: Should contain the name of the function block pointed to
> + by the components phandle of the same index.
NAK. Group these nodes under a parent node, use of-graph or just don't
put this into DT. Don't invent a new way.
> +- mmsys-config: Should contain a phandle pointing to the MMSYS node.
> +- disp-mutex: Should contain a phandle pointing to the DISP_MUTEX node.
> +
> +Example:
> +
> +display-subsystem {
> + compatible = "mediatek,mt8173-disp";
> + components = <&ovl0>, <&rdma0>, <&color0>, <&aal>,
> + <&ufoe>, <&dsi0>, <&od>;
> + component-names = "ovl0", "rdma0", "color0", "aal",
> + "ufoe", "dsi0", "od";
> + mmsys-config = <&mmsys>;
> + disp-mutex = <&mutex>;
> +};
> +
> +DISP function blocks
> +====================
> +
> +A display stream starts at a source function block that reads pixel data from
> +memory and ends with a sink function block that drives pixels on a display
> +interface, or writes pixels back to memory. All DISP function blocks have
> +their own register space, interrupt, and clock gate. The blocks that can
> +access memory additionally have to list the IOMMU and local arbiter they are
> +connected to.
> +
> +For a description of the display interface sink function blocks, see
> +Documentation/devicetree/bindings/drm/mediatek/mediatek,dsi.txt
> +
> +Required properties (all function blocks):
> +- compatible: "mediatek,<chip>-disp-<function>", one of
> + "mediatek,<chip>-disp-ovl" - overlay (4 layers, blending, csc)
> + "mediatek,<chip>-disp-rdma" - read DMA / line buffer
> + "mediatek,<chip>-disp-color" - color processor
> + "mediatek,<chip>-disp-aal" - adaptive ambient light controller
> + "mediatek,<chip>-disp-gamma" - gamma correction
> + "mediatek,<chip>-disp-ufoe" - data compression engine
> + "mediatek,<chip>-disp-mutex" - display mutex
> + "mediatek,<chip>-disp-od" - overdrive
> +- reg: Physical base address and length of the function block register space
> +- interrupts: The interrupt signal from the function block.
> +- clocks: device clocks
> + See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
> +- compatible: "mediatek,<chip>-ddp"
> +- power-domains: a phandle to DDP power domain node.
> +
> +Required properties (DMA function blocks):
> +- compatible: Should be one of
> + "mediatek,<chip>-disp-ovl"
> + "mediatek,<chip>-disp-rdma"
> +- larb: Should a phandles pointing to the local arbiter device as defined in
> + Documentation/devicetree/bindings/soc/mediatek/mediatek,smi-larb.txt
> +- iommus: required a iommu node
> +
> +Examples:
> +
> +ovl0: ovl at 1400c000 {
> + compatible = "mediatek,mt8173-disp-ovl";
> + reg = <0 0x1400c000 0 0x1000>;
> + interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&mmsys CLK_MM_DISP_OVL0>;
> + iommus = <&iommu M4U_LARB0_ID M4U_PORT_DISP_OVL0>;
> +};
> +
> +rdma0: rdma at 1400e000 {
> + compatible = "mediatek,mt8173-disp-rdma";
> + reg = <0 0x1400e000 0 0x1000>;
> + interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&mmsys CLK_MM_DISP_RDMA0>;
> + iommus = <&iommu M4U_LARB0_ID M4U_PORT_DISP_RDMA0>;
> +};
> +
> +color0: color at 14013000 {
> + compatible = "mediatek,mt8173-disp-color";
> + reg = <0 0x14013000 0 0x1000>;
> + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&mmsys CLK_MM_DISP_COLOR0>;
> +};
> +
> +aal: aal at 14015000 {
> + compatible = "mediatek,mt8173-disp-aal";
> + reg = <0 0x14015000 0 0x1000>;
> + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&mmsys CLK_MM_DISP_AAL>;
> +};
> +
> +gamma: gamma at 14016000 {
> + compatible = "mediatek,mt8173-disp-gamma";
> + reg = <0 0x14016000 0 0x1000>;
> + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&mmsys CLK_MM_DISP_GAMMA>;
> +};
> +
> +ufoe: ufoe at 1401a000 {
> + compatible = "mediatek,mt8173-disp-ufoe";
> + reg = <0 0x1401a000 0 0x1000>;
> + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&mmsys CLK_MM_DISP_UFOE>;
> +};
> +
> +mutex: mutex at 14020000 {
> + compatible = "mediatek,mt8173-disp-mutex";
> + reg = <0 0x14020000 0 0x1000>;
> + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_LOW>;
> + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
> + clocks = <&mmsys CLK_MM_MUTEX_32K>;
> +};
> +
> +od: od at 14023000 {
> + compatible = "mediatek,mt8173-disp-od";
> + reg = <0 0x14023000 0 0x1000>;
> + clocks = <&mmsys CLK_MM_DISP_OD>;
> +};
> diff --git a/Documentation/devicetree/bindings/drm/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/drm/mediatek/mediatek,dsi.txt
> new file mode 100644
> index 0000000..e892ef1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/drm/mediatek/mediatek,dsi.txt
> @@ -0,0 +1,29 @@
> +Mediatek DSI Device
> +===================
> +
> +The Mediatek DSI function block is a sink of the display subsystem and can
> +drive up to 4-lane MIPI DSI output. Two DSIs can be synchronized for dual-
> +channel output.
> +
> +Required properties:
> +- compatible: "mediatek,<chip>-dsi"
> +- reg: Physical base address and length of the controller's registers
> +- clocks: device clocks
> + See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
> +- clock-names: must contain "engine" and "digital".
This leaves wondering which one is used for DSI bit clock.
> +
> +Example:
> +
> +dsi0: dsi at 1401b000 {
> + compatible = "mediatek,mt8173-dsi";
> + reg = <0 0x1401b000 0 0x1000>, /* DSI0 */
> + <0 0x10215000 0 0x1000>; /* MIPI_TX0 */
> + clocks = <&mmsys MM_DSI0_ENGINE>, <&mmsys MM_DSI0_DIGITAL>;
> + clock-names = "engine", "digital";
> +
> + port {
Missing from the binding description.
> + dsi0_out: endpoint {
> + remote-endpoint = <&panel_in>;
> + };
> + };
> +};
> --
> 2.5.1
>
More information about the dri-devel
mailing list