[PATCH 1/5] ASoC : dwc : support dw i2s in slave mode
Alex Deucher
alexdeucher at gmail.com
Fri Sep 25 14:48:22 PDT 2015
From: Maruthi Srinivas Bayyavarapu <Maruthi.Bayyavarapu at amd.com>
dw i2s controller can work in slave mode, codec being master.
dw i2s is made to support master/slave operation, by reading dwc
register.
Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu at amd.com>
Signed-off-by: Alex Deucher <alexander.deucher at amd.com>
---
v2: check register to determine master/slave mode
include/sound/designware_i2s.h | 2 +
sound/soc/dwc/designware_i2s.c | 92 +++++++++++++++++++++++++-----------------
2 files changed, 57 insertions(+), 37 deletions(-)
diff --git a/include/sound/designware_i2s.h b/include/sound/designware_i2s.h
index 3a8fca9..8966ba7 100644
--- a/include/sound/designware_i2s.h
+++ b/include/sound/designware_i2s.h
@@ -38,6 +38,8 @@ struct i2s_clk_config_data {
struct i2s_platform_data {
#define DWC_I2S_PLAY (1 << 0)
#define DWC_I2S_RECORD (1 << 1)
+ #define DW_I2S_SLAVE (1 << 2)
+ #define DW_I2S_MASTER (1 << 3)
unsigned int cap;
int channel;
u32 snd_fmts;
diff --git a/sound/soc/dwc/designware_i2s.c b/sound/soc/dwc/designware_i2s.c
index a3e97b4..3a52f82 100644
--- a/sound/soc/dwc/designware_i2s.c
+++ b/sound/soc/dwc/designware_i2s.c
@@ -273,23 +273,25 @@ static int dw_i2s_hw_params(struct snd_pcm_substream *substream,
config->sample_rate = params_rate(params);
- if (dev->i2s_clk_cfg) {
- ret = dev->i2s_clk_cfg(config);
- if (ret < 0) {
- dev_err(dev->dev, "runtime audio clk config fail\n");
- return ret;
- }
- } else {
- u32 bitclk = config->sample_rate * config->data_width * 2;
-
- ret = clk_set_rate(dev->clk, bitclk);
- if (ret) {
- dev_err(dev->dev, "Can't set I2S clock rate: %d\n",
- ret);
- return ret;
+ if (dev->capability & DW_I2S_MASTER) {
+ if (dev->i2s_clk_cfg) {
+ ret = dev->i2s_clk_cfg(config);
+ if (ret < 0) {
+ dev_err(dev->dev, "runtime audio clk config fail\n");
+ return ret;
+ }
+ } else {
+ u32 bitclk = config->sample_rate *
+ config->data_width * 2;
+
+ ret = clk_set_rate(dev->clk, bitclk);
+ if (ret) {
+ dev_err(dev->dev, "Can't set I2S clock rate: %d\n",
+ ret);
+ return ret;
+ }
}
}
-
return 0;
}
@@ -357,7 +359,8 @@ static int dw_i2s_suspend(struct snd_soc_dai *dai)
{
struct dw_i2s_dev *dev = snd_soc_dai_get_drvdata(dai);
- clk_disable(dev->clk);
+ if (dev->capability & DW_I2S_MASTER)
+ clk_disable(dev->clk);
return 0;
}
@@ -365,7 +368,8 @@ static int dw_i2s_resume(struct snd_soc_dai *dai)
{
struct dw_i2s_dev *dev = snd_soc_dai_get_drvdata(dai);
- clk_enable(dev->clk);
+ if (dev->capability & DW_I2S_MASTER)
+ clk_enable(dev->clk);
return 0;
}
@@ -443,6 +447,14 @@ static int dw_configure_dai(struct dw_i2s_dev *dev,
dw_i2s_dai->capture.rates = rates;
}
+ if (COMP1_MODE_EN(comp1)) {
+ dev_dbg(dev->dev, "designware: i2s master mode supported\n");
+ dev->capability |= DW_I2S_MASTER;
+ } else {
+ dev_dbg(dev->dev, "designware: i2s slave mode supported\n");
+ dev->capability |= DW_I2S_SLAVE;
+ }
+
return 0;
}
@@ -529,6 +541,7 @@ static int dw_i2s_probe(struct platform_device *pdev)
struct resource *res;
int ret;
struct snd_soc_dai_driver *dw_i2s_dai;
+ const char *clk_id;
dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
if (!dev) {
@@ -550,32 +563,35 @@ static int dw_i2s_probe(struct platform_device *pdev)
return PTR_ERR(dev->i2s_base);
dev->dev = &pdev->dev;
+
if (pdata) {
+ dev->capability = pdata->cap;
+ clk_id = NULL;
ret = dw_configure_dai_by_pd(dev, dw_i2s_dai, res, pdata);
- if (ret < 0)
- return ret;
+ } else {
+ clk_id = "i2sclk";
+ ret = dw_configure_dai_by_dt(dev, dw_i2s_dai, res);
+ }
+ if (ret < 0)
+ return ret;
- dev->capability = pdata->cap;
- dev->i2s_clk_cfg = pdata->i2s_clk_cfg;
- if (!dev->i2s_clk_cfg) {
- dev_err(&pdev->dev, "no clock configure method\n");
- return -ENODEV;
+ if (dev->capability & DW_I2S_MASTER) {
+ if (pdata) {
+ dev->i2s_clk_cfg = pdata->i2s_clk_cfg;
+ if (!dev->i2s_clk_cfg) {
+ dev_err(&pdev->dev, "no clock configure method\n");
+ return -ENODEV;
+ }
}
+ dev->clk = devm_clk_get(&pdev->dev, clk_id);
- dev->clk = devm_clk_get(&pdev->dev, NULL);
- } else {
- ret = dw_configure_dai_by_dt(dev, dw_i2s_dai, res);
+ if (IS_ERR(dev->clk))
+ return PTR_ERR(dev->clk);
+
+ ret = clk_prepare_enable(dev->clk);
if (ret < 0)
return ret;
-
- dev->clk = devm_clk_get(&pdev->dev, "i2sclk");
}
- if (IS_ERR(dev->clk))
- return PTR_ERR(dev->clk);
-
- ret = clk_prepare_enable(dev->clk);
- if (ret < 0)
- return ret;
dev_set_drvdata(&pdev->dev, dev);
ret = devm_snd_soc_register_component(&pdev->dev, &dw_i2s_component,
@@ -597,7 +613,8 @@ static int dw_i2s_probe(struct platform_device *pdev)
return 0;
err_clk_disable:
- clk_disable_unprepare(dev->clk);
+ if (dev->capability & DW_I2S_MASTER)
+ clk_disable_unprepare(dev->clk);
return ret;
}
@@ -605,7 +622,8 @@ static int dw_i2s_remove(struct platform_device *pdev)
{
struct dw_i2s_dev *dev = dev_get_drvdata(&pdev->dev);
- clk_disable_unprepare(dev->clk);
+ if (dev->capability & DW_I2S_MASTER)
+ clk_disable_unprepare(dev->clk);
return 0;
}
--
1.8.3.1
More information about the dri-devel
mailing list