[PATCH v6 3/4] drm/dp_helper: Perform throw-away read before actual read in drm_dp_dpcd_read()

[Ville Syrjälä]

On Fri, Apr 15, 2016 at 10:25:35AM -0400, Lyude wrote:
> This is part of a patch series to migrate all of the workarounds for
> commonly seen behavior from bad sinks in intel_dp_dpcd_read_wake() to drm's
> DP helper.
> 
> Some sinks will just return garbage for the first aux tranaction they
> receive when coming out of sleep mode, so we need to perform an additional
> read before the actual read to workaround this.
> 
> 			    Changes since v5
> - If the throwaway read in drm_dp_dpcd_read() fails, return the error
>   from that instead of continuing. This follows the same logic we do in
>   drm_dp_dpcd_access() (e.g. the error from the first transaction may
>   differ from the errors that proceeding attempts might return).
> 
> Signed-off-by: Lyude <cpaul at redhat.com>

Reviewed-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala at linux.intel.com>

> ---
>  drivers/gpu/drm/drm_dp_helper.c | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
> 
> diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c
> index 540c3e4..eeaf5a7 100644
> --- a/drivers/gpu/drm/drm_dp_helper.c
> +++ b/drivers/gpu/drm/drm_dp_helper.c
> @@ -248,6 +248,25 @@ unlock:
>  ssize_t drm_dp_dpcd_read(struct drm_dp_aux *aux, unsigned int offset,
>  			 void *buffer, size_t size)
>  {
> +	int ret;
> +
> +	/*
> +	 * HP ZR24w corrupts the first DPCD access after entering power save
> +	 * mode. Eg. on a read, the entire buffer will be filled with the same
> +	 * byte. Do a throw away read to avoid corrupting anything we care
> +	 * about. Afterwards things will work correctly until the monitor
> +	 * gets woken up and subsequently re-enters power save mode.
> +	 *
> +	 * The user pressing any button on the monitor is enough to wake it
> +	 * up, so there is no particularly good place to do the workaround.
> +	 * We just have to do it before any DPCD access and hope that the
> +	 * monitor doesn't power down exactly after the throw away read.
> +	 */
> +	ret = drm_dp_dpcd_access(aux, DP_AUX_NATIVE_READ, DP_DPCD_REV, buffer,
> +				 1);
> +	if (ret != 1)
> +		return ret;
> +
>  	return drm_dp_dpcd_access(aux, DP_AUX_NATIVE_READ, offset, buffer,
>  				  size);
>  }
> -- 
> 2.5.5

-- 
Ville Syrjälä
Intel OTC