[PATCH 3/6] drm/fsl-dcu: move layer initialization to plane file

[Stefan Agner]

Move the initialization code for layers into a separate function
in the plane file. This allows to reuse the function on resume.
Also move it at the very beginning which may not matter but makes
logically much more sense.

Signed-off-by: Stefan Agner <stefan at agner.ch>
---
 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c  | 13 ++-----------
 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.c | 16 ++++++++++++++++
 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.h |  1 +
 3 files changed, 19 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c
index b024f90..ca0f7d83 100644
--- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c
+++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c
@@ -138,9 +138,10 @@ int fsl_dcu_drm_crtc_create(struct fsl_dcu_drm_device *fsl_dev)
 {
 	struct drm_plane *primary;
 	struct drm_crtc *crtc = &fsl_dev->crtc;
-	unsigned int i, j;
 	int ret;
 
+	fsl_dcu_drm_init_planes(fsl_dev->drm);
+
 	primary = fsl_dcu_drm_primary_create_plane(fsl_dev->drm);
 	if (!primary)
 		return -ENOMEM;
@@ -154,15 +155,5 @@ int fsl_dcu_drm_crtc_create(struct fsl_dcu_drm_device *fsl_dev)
 
 	drm_crtc_helper_add(crtc, &fsl_dcu_drm_crtc_helper_funcs);
 
-	for (i = 0; i < fsl_dev->soc->total_layer; i++) {
-		for (j = 1; j <= fsl_dev->soc->layer_regs; j++)
-			regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN(i, j), 0);
-	}
-	regmap_update_bits(fsl_dev->regmap, DCU_DCU_MODE,
-			   DCU_MODE_DCU_MODE_MASK,
-			   DCU_MODE_DCU_MODE(DCU_MODE_OFF));
-	regmap_write(fsl_dev->regmap, DCU_UPDATE_MODE,
-		     DCU_UPDATE_MODE_READREG);
-
 	return 0;
 }
diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.c
index 274558b..e50467a 100644
--- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.c
+++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.c
@@ -217,6 +217,22 @@ static const u32 fsl_dcu_drm_plane_formats[] = {
 	DRM_FORMAT_YUV422,
 };
 
+void fsl_dcu_drm_init_planes(struct drm_device *dev)
+{
+	struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
+	int i, j;
+
+	for (i = 0; i < fsl_dev->soc->total_layer; i++) {
+		for (j = 1; j <= fsl_dev->soc->layer_regs; j++)
+			regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN(i, j), 0);
+	}
+	regmap_update_bits(fsl_dev->regmap, DCU_DCU_MODE,
+			   DCU_MODE_DCU_MODE_MASK,
+			   DCU_MODE_DCU_MODE(DCU_MODE_OFF));
+	regmap_write(fsl_dev->regmap, DCU_UPDATE_MODE,
+		     DCU_UPDATE_MODE_READREG);
+}
+
 struct drm_plane *fsl_dcu_drm_primary_create_plane(struct drm_device *dev)
 {
 	struct drm_plane *primary;
diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.h b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.h
index d657f08..8ee45f8 100644
--- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.h
+++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.h
@@ -12,6 +12,7 @@
 #ifndef __FSL_DCU_DRM_PLANE_H__
 #define __FSL_DCU_DRM_PLANE_H__
 
+void fsl_dcu_drm_init_planes(struct drm_device *dev);
 struct drm_plane *fsl_dcu_drm_primary_create_plane(struct drm_device *dev);
 
 #endif /* __FSL_DCU_DRM_PLANE_H__ */
-- 
2.8.0