Nouveau crashes in 4.6-rc on arm64

[Alexandre Courbot]

On 04/11/2016 04:22 PM, Alexandre Courbot wrote:
> Hi Robin,
>
> On 04/09/2016 03:46 AM, Robin Murphy wrote:
>> Hi Alex,
>>
>> On 08/04/16 05:47, Alexandre Courbot wrote:
>>> Hi Robin,
>>>
>>> On 04/07/2016 08:50 PM, Robin Murphy wrote:
>>>> Hello,
>>>>
>>>> With 4.6-rc2 (and -rc1) I'm seeing Nouveau blowing up at boot, from the
>>>> look of it by dereferencing some offset from NULL inside
>>>> nouveau_fbcon_imageblit(). My setup is an old XFX 7600GT card plugged
>>>> into an ARM Juno r1 board, which works fine with 4.5 and earlier.
>>>>
>>>> Attached are a couple of logs from booting arm64 defconfig plus DRM and
>>>> Nouveau enabled - the second also has framebuffer console rotation
>>>> turned on, which interestingly seems to move the point of failure, and
>>>> the display does eventually come up to show the tail end of the
>>>> panic in
>>>> that case.
>>>>
>>>> I might be able to find time for a full bisection next week if isn't
>>>> something sufficiently obvious to anyone who knows this driver.
>>>
>>> Looking at the log it is not clear to me what could be causing this. I
>>> can boot 4.6-rc2 with a GM206 card without any issue. A bisect would
>>> indeed be useful here.
>>
>> OK, turns out the lure of writing something to remotely drive a Juno and
>> parse kernel bootlogs through an automatic bisection was too great to
>> resist on a Friday afternoon :D
>>
>> Bisection came down to 1733a2ad3674("drm/nouveau/device/pci: set as
>> non-CPU-coherent on ARM64"), and sure enough reverting that removes the
>> crash.
>
> Thanks for taking the time to bisect this. And apologies as it seems my
> commit is the reason for your troubles.
>
> The CPU coherency flag is used for two things: explicitly sync buffers
> pages when required, and allocating buffers that are not explicitly
> synced (like fences or pushbuffers) using the DMA API. For this latter
> use, it also accesses the buffer's content using the mapping provided by
> dma_alloc_coherent() instead of creating a new one. All nouveau_bos are
> supposed to be written using nouveau_bo_rd32(), and this function
> handles the case of an DMA-API allocated object by detecting that the
> result of ttm_kmap_obj_virtual() is NULL.
>
> But as it turns out, OUT_RINGp() also calls ttm_kmap_obj_virtual() in
> order to perform a memcpy and uses its result directly - which means we
> are doing memcpy on a NULL pointer. We never caught this because we
> typically do not use Nouveau's fbcon with an ARM setup.
>
> I don't really like this special access for coherent objects, and
> actually had a patch in my tree to attempt to remove it (attached).
> Although it is not the whole solution (see below), the issue should at
> least not be visible with it applied - could you confirm?

Hi Robin, could you confirm whether the attached patch in my previous 
mail helps with your problem?

Thanks!