[PATCH v2 3/4] drm/dsi: Implement set tear scanline

Vinay Simha BN simhavcs at gmail.com
Wed Apr 20 09:32:32 UTC 2016


Provide a small convenience wrapper that transmits
a set_tear_scanline command.

Signed-off-by: Vinay Simha BN <simhavcs at gmail.com>
---
 drivers/gpu/drm/drm_mipi_dsi.c | 22 ++++++++++++++++++++++
 include/drm/drm_mipi_dsi.h     |  2 ++
 2 files changed, 24 insertions(+)

diff --git a/drivers/gpu/drm/drm_mipi_dsi.c b/drivers/gpu/drm/drm_mipi_dsi.c
index f5d8083..26aba75 100644
--- a/drivers/gpu/drm/drm_mipi_dsi.c
+++ b/drivers/gpu/drm/drm_mipi_dsi.c
@@ -983,6 +983,28 @@ int mipi_dsi_dcs_set_tear_on(struct mipi_dsi_device *dsi,
 EXPORT_SYMBOL(mipi_dsi_dcs_set_tear_on);
 
 /**
+ * mipi_dsi_set_tear_scanline() - turn on the display module's Tearing Effect
+ *    output signal on the TE signal line when display module reaches line N
+ *    defined by STS[n:0].
+ * @dsi: DSI peripheral device
+ * @param1: STS[10:8]
+ * @param2: STS[7:0]
+ * Return: 0 on success or a negative error code on failure
+ */
+int mipi_dsi_set_tear_scanline(struct mipi_dsi_device *dsi,
+                             u8 param1, u8 param2)
+{
+        u8 payload[3] = { MIPI_DCS_SET_TEAR_SCANLINE, param1 , param2};
+        ssize_t err;
+
+        err = mipi_dsi_generic_write(dsi, &payload, sizeof(payload));
+        if (err < 0)
+                return err;
+
+        return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_set_tear_scanline);
+/**
  * mipi_dsi_dcs_set_pixel_format() - sets the pixel format for the RGB image
  *    data used by the interface
  * @dsi: DSI peripheral device
diff --git a/include/drm/drm_mipi_dsi.h b/include/drm/drm_mipi_dsi.h
index 7a9840f..37bd75d 100644
--- a/include/drm/drm_mipi_dsi.h
+++ b/include/drm/drm_mipi_dsi.h
@@ -263,6 +263,8 @@ int mipi_dsi_dcs_set_column_address(struct mipi_dsi_device *dsi, u16 start,
 				    u16 end);
 int mipi_dsi_dcs_set_page_address(struct mipi_dsi_device *dsi, u16 start,
 				  u16 end);
+int mipi_dsi_set_tear_scanline(struct mipi_dsi_device *dsi, u8 param1,
+				   u8 param2);
 int mipi_dsi_dcs_set_tear_off(struct mipi_dsi_device *dsi);
 int mipi_dsi_dcs_set_tear_on(struct mipi_dsi_device *dsi,
 			     enum mipi_dsi_dcs_tear_mode mode);
-- 
2.1.2



More information about the dri-devel mailing list