[PATCH v3 4/7] drm/i2c: adv7511: Create a MIPI DSI device
Laurent Pinchart
laurent.pinchart at ideasonboard.com
Thu Apr 21 22:29:34 UTC 2016
Hi Archit,
Thank you for the patch.
On Wednesday 09 Mar 2016 16:27:15 Archit Taneja wrote:
> In order to pass DSI specific parameters to the DSI host, we need the
> driver to create a mipi_dsi_device DSI device that attaches to the
> host.
>
> Use of_graph helpers to get the DSI host DT node. Create a MIPI DSI
> device using this host. Finally, attach this device to the DSI host.
>
> Populate DT parameters (number of data lanes for now) that are required
> for DSI RX to work correctly. Hardcode few other parameters (rgb,
> embedded_sync) for now.
>
> Signed-off-by: Archit Taneja <architt at codeaurora.org>
This adds a hard dependency on CONFIG_DRM_MIPI_DSI, otherwise the kernel won't
link. As the ADV7511 doesn't require DSI, could you make it optional with
conditional compilation to avoid pulling in dead code ?
> ---
> drivers/gpu/drm/i2c/adv7511.c | 130 ++++++++++++++++++++++++++++++++++++---
> 1 file changed, 123 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/gpu/drm/i2c/adv7511.c b/drivers/gpu/drm/i2c/adv7511.c
> index 75be17c..6c2a89a 100644
> --- a/drivers/gpu/drm/i2c/adv7511.c
> +++ b/drivers/gpu/drm/i2c/adv7511.c
> @@ -11,6 +11,7 @@
> #include <linux/i2c.h>
> #include <linux/module.h>
> #include <linux/of_device.h>
> +#include <linux/of_graph.h>
> #include <linux/regmap.h>
> #include <linux/slab.h>
>
> @@ -19,6 +20,7 @@
> #include <drm/drm_atomic_helper.h>
> #include <drm/drm_crtc_helper.h>
> #include <drm/drm_edid.h>
> +#include <drm/drm_mipi_dsi.h>
>
> #include "adv7511.h"
>
> @@ -56,6 +58,11 @@ struct adv7511 {
>
> struct gpio_desc *gpio_pd;
>
> + /* ADV7533 DSI RX related params */
> + struct device_node *host_node;
> + struct mipi_dsi_device *dsi;
> + u8 num_dsi_lanes;
> +
> enum adv7511_type type;
> };
>
> @@ -392,8 +399,10 @@ static void adv7511_set_link_config(struct adv7511
> *adv7511,
>
> static void adv7533_dsi_power_on(struct adv7511 *adv)
> {
> - /* set number of dsi lanes (hardcoded to 4 for now) */
> - regmap_write(adv->regmap_cec, 0x1c, 0x4 << 4);
> + struct mipi_dsi_device *dsi = adv->dsi;
> +
> + /* set number of dsi lanes */
> + regmap_write(adv->regmap_cec, 0x1c, dsi->lanes << 4);
> /* disable internal timing generator */
> regmap_write(adv->regmap_cec, 0x27, 0x0b);
> /* enable hdmi */
> @@ -889,6 +898,51 @@ static void adv7511_bridge_mode_set(struct drm_bridge
> *bridge, adv7511_mode_set(adv, mode, adj_mode);
> }
>
> +static int adv7533_attach_dsi(struct adv7511 *adv)
> +{
> + struct device *dev = &adv->i2c_main->dev;
> + struct mipi_dsi_host *host;
> + struct mipi_dsi_device *dsi;
> + int ret = 0;
> + const struct mipi_dsi_device_info info = { .type = "adv7533",
> + .channel = 0,
> + .node = NULL,
> + };
> +
> + host = of_find_mipi_dsi_host_by_node(adv->host_node);
> + if (!host) {
> + dev_err(dev, "failed to find dsi host\n");
> + return -EPROBE_DEFER;
> + }
> +
> + dsi = mipi_dsi_device_register_full(host, &info);
> + if (IS_ERR(dsi)) {
> + dev_err(dev, "failed to create dsi device\n");
> + ret = PTR_ERR(dsi);
> + goto err_dsi_device;
> + }
> +
> + adv->dsi = dsi;
> +
> + dsi->lanes = adv->num_dsi_lanes;
> + dsi->format = MIPI_DSI_FMT_RGB888;
> + dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
> + MIPI_DSI_MODE_EOT_PACKET | MIPI_DSI_MODE_VIDEO_HSE;
> +
> + ret = mipi_dsi_attach(dsi);
> + if (ret < 0) {
> + dev_err(dev, "failed to attach dsi to host\n");
> + goto err_dsi_attach;
> + }
> +
> + return 0;
> +
> +err_dsi_attach:
> + mipi_dsi_device_unregister(dsi);
> +err_dsi_device:
> + return ret;
> +}
> +
> static int adv7511_bridge_attach(struct drm_bridge *bridge)
> {
> struct adv7511 *adv = bridge_to_adv7511(bridge);
> @@ -912,6 +966,9 @@ static int adv7511_bridge_attach(struct drm_bridge
> *bridge) &adv7511_connector_helper_funcs);
> drm_mode_connector_attach_encoder(&adv->connector, bridge->encoder);
>
> + if (adv->type == ADV7533)
> + ret = adv7533_attach_dsi(adv);
> +
> return ret;
> }
>
> @@ -1009,6 +1066,41 @@ static int adv7511_parse_dt(struct device_node *np,
> return 0;
> }
>
> +static int adv7533_parse_dt(struct device_node *np, struct adv7511 *adv)
> +{
> + u32 num_lanes;
> + struct device_node *endpoint;
> +
> + of_property_read_u32(np, "adi,dsi-lanes", &num_lanes);
> +
> + if (num_lanes < 1 || num_lanes > 4)
> + return -EINVAL;
> +
> + adv->num_dsi_lanes = num_lanes;
> +
> + endpoint = of_graph_get_next_endpoint(np, NULL);
> + if (!endpoint) {
> + DRM_ERROR("ADV7533 DSI input endpoint not found\n");
> + return -ENODEV;
> + }
> +
> + adv->host_node = of_graph_get_remote_port_parent(endpoint);
> + if (!adv->host_node) {
> + DRM_ERROR("DSI host node not found\n");
> + of_node_put(endpoint);
> + return -ENODEV;
> + }
> +
> + of_node_put(endpoint);
> + of_node_put(adv->host_node);
> +
> + /* TODO: Check if these need to be parsed by DT or not */
> + adv->rgb = true;
> + adv->embedded_sync = false;
> +
> + return 0;
> +}
> +
> static const int edid_i2c_addr = 0x7e;
> static const int packet_i2c_addr = 0x70;
> static const int cec_i2c_addr = 0x78;
> @@ -1038,11 +1130,12 @@ static int adv7511_probe(struct i2c_client *i2c,
> const struct i2c_device_id *id)
>
> memset(&link_config, 0, sizeof(link_config));
>
> - if (adv7511->type == ADV7511) {
> + if (adv7511->type == ADV7511)
> ret = adv7511_parse_dt(dev->of_node, &link_config);
> - if (ret)
> - return ret;
> - }
> + else
> + ret = adv7533_parse_dt(dev->of_node, adv7511);
> + if (ret)
> + return ret;
>
> /*
> * The power down GPIO is optional. If present, toggle it from active to
> @@ -1155,6 +1248,11 @@ static int adv7511_remove(struct i2c_client *i2c)
> {
> struct adv7511 *adv7511 = i2c_get_clientdata(i2c);
>
> + if (adv7511->type == ADV7533) {
> + mipi_dsi_detach(adv7511->dsi);
> + mipi_dsi_device_unregister(adv7511->dsi);
> + }
> +
> drm_bridge_remove(&adv7511->bridge);
>
> i2c_unregister_device(adv7511->i2c_cec);
> @@ -1183,6 +1281,10 @@ static const struct of_device_id adv7511_of_ids[] = {
> };
> MODULE_DEVICE_TABLE(of, adv7511_of_ids);
>
> +static struct mipi_dsi_driver adv7533_dsi_driver = {
> + .driver.name = "adv7533",
> +};
> +
> static struct i2c_driver adv7511_driver = {
> .driver = {
> .name = "adv7511",
> @@ -1193,7 +1295,21 @@ static struct i2c_driver adv7511_driver = {
> .remove = adv7511_remove,
> };
>
> -module_i2c_driver(adv7511_driver);
> +static int __init adv7511_init(void)
> +{
> + mipi_dsi_driver_register(&adv7533_dsi_driver);
> +
> + return i2c_add_driver(&adv7511_driver);
> +}
> +module_init(adv7511_init);
> +
> +static void __exit adv7511_exit(void)
> +{
> + i2c_del_driver(&adv7511_driver);
> +
> + mipi_dsi_driver_unregister(&adv7533_dsi_driver);
> +}
> +module_exit(adv7511_exit);
>
> MODULE_AUTHOR("Lars-Peter Clausen <lars at metafoo.de>");
> MODULE_DESCRIPTION("ADV7511 HDMI transmitter driver");
--
Regards,
Laurent Pinchart
More information about the dri-devel
mailing list