[PATCH v3 7/7] dt-bindings: drm/bridge: Update bindings for ADV7533

[Laurent Pinchart]

Hi Archit,

Thank you for the patch.

On Wednesday 09 Mar 2016 16:27:18 Archit Taneja wrote:
> Add description of ADV7533. Add the required and optional properties that
> are specific to it.
> 
> Cc: devicetree at vger.kernel.org
> Cc: Rob Herring <robh at kernel.org>
> 
> Signed-off-by: Archit Taneja <architt at codeaurora.org>
> ---
>  .../bindings/display/bridge/adi,adv7511.txt        | 25 ++++++++++++++-----
>  1 file changed, 20 insertions(+), 5 deletions(-)
> 
> diff --git
> a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
> b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt index
> 96c25ee..420da5a 100644
> --- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
> +++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
> @@ -1,13 +1,19 @@
> -Analog Device ADV7511(W)/13 HDMI Encoders
> +Analog Device ADV7511(W)/13/33 HDMI Encoders
>  -----------------------------------------
> 
> -The ADV7511, ADV7511W and ADV7513 are HDMI audio and video transmitters
> +The ADV7511, ADV7511W, ADV7513 and ADV7533 are HDMI audio and video
> transmitters compatible with HDMI 1.4 and DVI 1.0. They support color space
> conversion, -S/PDIF, CEC and HDCP.
> +S/PDIF, CEC and HDCP. ADV7533 supports the DSI interface for input pixels,
> while +the others support RGB interface.
> 
>  Required properties:
> 
> -- compatible: Should be one of "adi,adv7511", "adi,adv7511w" or
> "adi,adv7513" +- compatible: Should be one of:
> +		"adi,adv7511"
> +		"adi,adv7511w"
> +		"adi,adv7513"
> +		"adi,adv7533"
> +
>  - reg: I2C slave address
> 
>  The ADV7511 supports a large number of input data formats that differ by
> their @@ -32,6 +38,11 @@ The following input format properties are required
> except in "rgb 1x" and - adi,input-justification: The input bit
> justification ("left", "evenly", "right").
> 
> +The following properties are required for ADV7533:
> +
> +- adi,dsi-lanes: Number of DSI data lanes connected to the DSI host. It
> should +  be one of 1, 2, 3 or 4.

Does the ADV7533 support data lanes remapping ?

>  Optional properties:
> 
>  - interrupts: Specifier for the ADV7511 interrupt
> @@ -42,13 +53,17 @@ Optional properties:
>  - adi,embedded-sync: The input uses synchronization signals embedded in the
> data stream (similar to BT.656). Defaults to separate H/V synchronization
> signals.
> +- adi,disable-timing-generator: Only for ADV7533. Disables the internal
> timing +  generator. The chip will rely on the sync signals in the DSI data
> lanes, +  rather than generate its own timings for HDMI output.

Isn't that something that should be selectable at runtime ?

>  Required nodes:
> 
>  The ADV7511 has two video ports. Their connections are modelled using the
> OF graph bindings specified in Documentation/devicetree/bindings/graph.txt.
> 
> -- Video port 0 for the RGB or YUV input
> +- Video port 0 for the RGB, YUV or DSI input. In the case of ADV7533, the
> +  remote endpoint phandle should refer to a valid mipi_dsi_host device

Nitpicking, I would write "reference" instead of "refer to".

> node. - Video port 1 for the HDMI output

-- 
Regards,

Laurent Pinchart