[PATCH v3 0/7] drm/i2c: adv7511: ADV7533 support

[Archit Taneja]

On 04/22/2016 04:03 AM, Laurent Pinchart wrote:
> Hi Archit,
>
> On Thursday 14 Apr 2016 20:26:11 Archit Taneja wrote:
>> On 3/9/2016 4:27 PM, Archit Taneja wrote:
>>> ADV7533 is a DSI to HDMI encoder chip. It's like ADV7511, but with an
>>> additional DSI RX block that takes in DSI video mode output.
>>>
>>> Trying to get this driver merged has had some challenges:
>>>
>>> - ADV7533 has an I2C control bus, but acts as a DSI peripheral too.
>>>
>>>     After discussions, it was concluded that we'd want to provide an
>>>     API to create MIPI DSI devices, rather than expose two different
>>>     interfaces on DT. The first version [1] tried the former approach
>>>     the second version [2] showed how the driver would look like if
>>>     exposed 2 DT nodes. This lateset patchset relies on the MIPI DSI
>>>     device creation API provided by [3], this has been accepted and
>>>     should be merged for 4.6.
>>>
>>> - The driver was designed as an I2C slave encoder. When ADV7533
>>>
>>>     patches were posted [1], it was modelled as a bridge, but ADV7511
>>>     and others were still left as I2C slave encoders. This wasn't
>>>     accepted. After discussions, it was decided that ADV7511 too would
>>>     be converted into a bridge driver, and all the users of ADV7511
>>>     should assume it is a bridge. This bridge conversion was done in
>>>     [4]. There is still some debate over whether the bridge driver be
>>>     involved in the connector creation, or the KMS driver that has
>>>     the whole view of the display pipeline. This discussion shouldn't
>>>     affect this patch set, though.
>>>
>>> This patch set enables ADV7533 support with the above two issues
>>> now resolved. It also incorporates ADV7533 specific features and fixes
>>> that we've discovered since the first version of this patch was posted.
>>>
>>> Tested on ADV7533 chips on DB410c. It should work on the Hikey board too.
>>> I'd appreaciate if someone could test it on a ADV7511 platform since I
>>> don't have one.
>>
>> Could you try this patch set on the rcar-du platform? It would help to
>> verify if this doesn't break ADV7511.
>
> Basic testing didn't show any regression. For the whole series,
>
> Tested-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>

Thanks!

Archit

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora 
Forum, hosted by The Linux Foundation