[PATCHv15 09/15] cec: adv7604: add cec support.
Hans Verkuil
hverkuil at xs4all.nl
Mon Apr 25 12:24:36 UTC 2016
From: Hans Verkuil <hans.verkuil at cisco.com>
Add CEC support to the adv7604 driver.
Signed-off-by: Hans Verkuil <hansverk at cisco.com>
[k.debski at samsung.com: Merged changes from CEC Updates commit by Hans Verkuil]
[k.debski at samsung.com: add missing methods cec/io_write_and_or]
[k.debski at samsung.com: change adv7604 to adv76xx in added functions]
[hansverk at cisco.com: use _clr_set instead of _and_or]
---
drivers/media/i2c/Kconfig | 9 ++
drivers/media/i2c/adv7604.c | 332 +++++++++++++++++++++++++++++++++++++++-----
2 files changed, 305 insertions(+), 36 deletions(-)
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index 993dc50..cba1fc7 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -209,6 +209,7 @@ config VIDEO_ADV7604
depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
depends on GPIOLIB || COMPILE_TEST
select HDMI
+ select MEDIA_CEC_EDID
---help---
Support for the Analog Devices ADV7604 video decoder.
@@ -218,6 +219,14 @@ config VIDEO_ADV7604
To compile this driver as a module, choose M here: the
module will be called adv7604.
+config VIDEO_ADV7604_CEC
+ bool "Enable Analog Devices ADV7604 CEC support"
+ depends on VIDEO_ADV7604 && MEDIA_CEC
+ default y
+ ---help---
+ When selected the adv7604 will support the optional
+ HDMI CEC feature.
+
config VIDEO_ADV7842
tristate "Analog Devices ADV7842 decoder"
depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c
index 41a1bfc..d99f30a 100644
--- a/drivers/media/i2c/adv7604.c
+++ b/drivers/media/i2c/adv7604.c
@@ -40,6 +40,7 @@
#include <linux/regmap.h>
#include <media/i2c/adv7604.h>
+#include <media/cec.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-device.h>
#include <media/v4l2-event.h>
@@ -80,6 +81,8 @@ MODULE_LICENSE("GPL");
#define ADV76XX_OP_SWAP_CB_CR (1 << 0)
+#define ADV76XX_MAX_ADDRS (3)
+
enum adv76xx_type {
ADV7604,
ADV7611,
@@ -184,6 +187,12 @@ struct adv76xx_state {
u16 spa_port_a[2];
struct v4l2_fract aspect_ratio;
u32 rgb_quantization_range;
+
+ struct cec_adapter *cec_adap;
+ u8 cec_addr[ADV76XX_MAX_ADDRS];
+ u8 cec_valid_addrs;
+ bool cec_enabled_adap;
+
struct workqueue_struct *work_queues;
struct delayed_work delayed_work_enable_hotplug;
bool restart_stdi_once;
@@ -381,7 +390,8 @@ static inline int io_write(struct v4l2_subdev *sd, u8 reg, u8 val)
return regmap_write(state->regmap[ADV76XX_PAGE_IO], reg, val);
}
-static inline int io_write_clr_set(struct v4l2_subdev *sd, u8 reg, u8 mask, u8 val)
+static inline int io_write_clr_set(struct v4l2_subdev *sd, u8 reg, u8 mask,
+ u8 val)
{
return io_write(sd, reg, (io_read(sd, reg) & ~mask) | val);
}
@@ -414,6 +424,12 @@ static inline int cec_write(struct v4l2_subdev *sd, u8 reg, u8 val)
return regmap_write(state->regmap[ADV76XX_PAGE_CEC], reg, val);
}
+static inline int cec_write_clr_set(struct v4l2_subdev *sd, u8 reg, u8 mask,
+ u8 val)
+{
+ return cec_write(sd, reg, (cec_read(sd, reg) & ~mask) | val);
+}
+
static inline int infoframe_read(struct v4l2_subdev *sd, u8 reg)
{
struct adv76xx_state *state = to_state(sd);
@@ -872,9 +888,9 @@ static int adv76xx_s_detect_tx_5v_ctrl(struct v4l2_subdev *sd)
{
struct adv76xx_state *state = to_state(sd);
const struct adv76xx_chip_info *info = state->info;
+ u16 cable_det = info->read_cable_det(sd);
- return v4l2_ctrl_s_ctrl(state->detect_tx_5v_ctrl,
- info->read_cable_det(sd));
+ return v4l2_ctrl_s_ctrl(state->detect_tx_5v_ctrl, cable_det);
}
static int find_and_set_predefined_video_timings(struct v4l2_subdev *sd,
@@ -1900,6 +1916,210 @@ static int adv76xx_set_format(struct v4l2_subdev *sd,
return 0;
}
+#if IS_ENABLED(CONFIG_VIDEO_ADV7604_CEC)
+static void adv76xx_cec_tx_raw_status(struct v4l2_subdev *sd, u8 tx_raw_status)
+{
+ struct adv76xx_state *state = to_state(sd);
+
+ if ((cec_read(sd, 0x11) & 0x01) == 0) {
+ v4l2_dbg(1, debug, sd, "%s: tx raw: tx disabled\n", __func__);
+ return;
+ }
+
+ if (tx_raw_status & 0x02) {
+ v4l2_dbg(1, debug, sd, "%s: tx raw: arbitration lost\n",
+ __func__);
+ cec_transmit_done(state->cec_adap, CEC_TX_STATUS_ARB_LOST,
+ 1, 0, 0, 0);
+ }
+ if (tx_raw_status & 0x04) {
+ u8 status;
+ u8 nack_cnt;
+ u8 low_drive_cnt;
+
+ v4l2_dbg(1, debug, sd, "%s: tx raw: retry failed\n", __func__);
+ /*
+ * We set this status bit since this hardware performs
+ * retransmissions.
+ */
+ status = CEC_TX_STATUS_MAX_RETRIES;
+ nack_cnt = cec_read(sd, 0x14) & 0xf;
+ if (nack_cnt)
+ status |= CEC_TX_STATUS_NACK;
+ low_drive_cnt = cec_read(sd, 0x14) >> 4;
+ if (low_drive_cnt)
+ status |= CEC_TX_STATUS_LOW_DRIVE;
+ cec_transmit_done(state->cec_adap, status,
+ 0, nack_cnt, low_drive_cnt, 0);
+ return;
+ }
+ if (tx_raw_status & 0x01) {
+ v4l2_dbg(1, debug, sd, "%s: tx raw: ready ok\n", __func__);
+ cec_transmit_done(state->cec_adap, CEC_TX_STATUS_OK, 0, 0, 0, 0);
+ return;
+ }
+}
+
+static void adv76xx_cec_isr(struct v4l2_subdev *sd, bool *handled)
+{
+ struct adv76xx_state *state = to_state(sd);
+ u8 cec_irq;
+
+ /* cec controller */
+ cec_irq = io_read(sd, 0x4d) & 0x0f;
+ if (!cec_irq)
+ return;
+
+ v4l2_dbg(1, debug, sd, "%s: cec: irq 0x%x\n", __func__, cec_irq);
+ adv76xx_cec_tx_raw_status(sd, cec_irq);
+ if (cec_irq & 0x08) {
+ struct cec_msg msg;
+
+ msg.len = cec_read(sd, 0x25) & 0x1f;
+ if (msg.len > 16)
+ msg.len = 16;
+
+ if (msg.len) {
+ u8 i;
+
+ for (i = 0; i < msg.len; i++)
+ msg.msg[i] = cec_read(sd, i + 0x15);
+ cec_write(sd, 0x26, 0x01); /* re-enable rx */
+ cec_received_msg(state->cec_adap, &msg);
+ }
+ }
+
+ /* note: the bit order is swapped between 0x4d and 0x4e */
+ cec_irq = ((cec_irq & 0x08) >> 3) | ((cec_irq & 0x04) >> 1) |
+ ((cec_irq & 0x02) << 1) | ((cec_irq & 0x01) << 3);
+ io_write(sd, 0x4e, cec_irq);
+
+ if (handled)
+ *handled = true;
+}
+
+static int adv76xx_cec_adap_enable(struct cec_adapter *adap, bool enable)
+{
+ struct adv76xx_state *state = adap->priv;
+ struct v4l2_subdev *sd = &state->sd;
+
+ if (!state->cec_enabled_adap && enable) {
+ cec_write_clr_set(sd, 0x2a, 0x01, 0x01); /* power up cec */
+ cec_write(sd, 0x2c, 0x01); /* cec soft reset */
+ cec_write_clr_set(sd, 0x11, 0x01, 0); /* initially disable tx */
+ /* enabled irqs: */
+ /* tx: ready */
+ /* tx: arbitration lost */
+ /* tx: retry timeout */
+ /* rx: ready */
+ io_write_clr_set(sd, 0x50, 0x0f, 0x0f);
+ cec_write(sd, 0x26, 0x01); /* enable rx */
+ } else if (state->cec_enabled_adap && !enable) {
+ /* disable cec interrupts */
+ io_write_clr_set(sd, 0x50, 0x0f, 0x00);
+ /* disable address mask 1-3 */
+ cec_write_clr_set(sd, 0x27, 0x70, 0x00);
+ /* power down cec section */
+ cec_write_clr_set(sd, 0x2a, 0x01, 0x00);
+ state->cec_valid_addrs = 0;
+ }
+ state->cec_enabled_adap = enable;
+ adv76xx_s_detect_tx_5v_ctrl(sd);
+ return 0;
+}
+
+static int adv76xx_cec_adap_log_addr(struct cec_adapter *adap, u8 addr)
+{
+ struct adv76xx_state *state = adap->priv;
+ struct v4l2_subdev *sd = &state->sd;
+ unsigned i, free_idx = ADV76XX_MAX_ADDRS;
+
+ if (!state->cec_enabled_adap)
+ return -EIO;
+
+ if (addr == CEC_LOG_ADDR_INVALID) {
+ cec_write_clr_set(sd, 0x27, 0x70, 0);
+ state->cec_valid_addrs = 0;
+ return 0;
+ }
+
+ for (i = 0; i < ADV76XX_MAX_ADDRS; i++) {
+ bool is_valid = state->cec_valid_addrs & (1 << i);
+
+ if (free_idx == ADV76XX_MAX_ADDRS && !is_valid)
+ free_idx = i;
+ if (is_valid && state->cec_addr[i] == addr)
+ return 0;
+ }
+ if (i == ADV76XX_MAX_ADDRS) {
+ i = free_idx;
+ if (i == ADV76XX_MAX_ADDRS)
+ return -ENXIO;
+ }
+ state->cec_addr[i] = addr;
+ state->cec_valid_addrs |= 1 << i;
+
+ switch (i) {
+ case 0:
+ /* enable address mask 0 */
+ cec_write_clr_set(sd, 0x27, 0x10, 0x10);
+ /* set address for mask 0 */
+ cec_write_clr_set(sd, 0x28, 0x0f, addr);
+ break;
+ case 1:
+ /* enable address mask 1 */
+ cec_write_clr_set(sd, 0x27, 0x20, 0x20);
+ /* set address for mask 1 */
+ cec_write_clr_set(sd, 0x28, 0xf0, addr << 4);
+ break;
+ case 2:
+ /* enable address mask 2 */
+ cec_write_clr_set(sd, 0x27, 0x40, 0x40);
+ /* set address for mask 1 */
+ cec_write_clr_set(sd, 0x29, 0x0f, addr);
+ break;
+ }
+ return 0;
+}
+
+static int adv76xx_cec_adap_transmit(struct cec_adapter *adap, u8 attempts,
+ u32 signal_free_time, struct cec_msg *msg)
+{
+ struct adv76xx_state *state = adap->priv;
+ struct v4l2_subdev *sd = &state->sd;
+ u8 len = msg->len;
+ unsigned i;
+
+ /*
+ * The number of retries is the number of attempts - 1, but retry
+ * at least once. It's not clear if a value of 0 is allowed, so
+ * let's do at least one retry.
+ */
+ cec_write_clr_set(sd, 0x12, 0x70, max(1, attempts - 1) << 4);
+
+ if (len > 16) {
+ v4l2_err(sd, "%s: len exceeded 16 (%d)\n", __func__, len);
+ return -EINVAL;
+ }
+
+ /* write data */
+ for (i = 0; i < len; i++)
+ cec_write(sd, i, msg->msg[i]);
+
+ /* set length (data + header) */
+ cec_write(sd, 0x10, len);
+ /* start transmit, enable tx */
+ cec_write(sd, 0x11, 0x01);
+ return 0;
+}
+
+static const struct cec_adap_ops adv76xx_cec_adap_ops = {
+ .adap_enable = adv76xx_cec_adap_enable,
+ .adap_log_addr = adv76xx_cec_adap_log_addr,
+ .adap_transmit = adv76xx_cec_adap_transmit,
+};
+#endif
+
static int adv76xx_isr(struct v4l2_subdev *sd, u32 status, bool *handled)
{
struct adv76xx_state *state = to_state(sd);
@@ -1945,6 +2165,11 @@ static int adv76xx_isr(struct v4l2_subdev *sd, u32 status, bool *handled)
*handled = true;
}
+#if IS_ENABLED(CONFIG_VIDEO_ADV7604_CEC)
+ /* cec */
+ adv76xx_cec_isr(sd, handled);
+#endif
+
/* tx 5v detect */
tx_5v = irq_reg_0x70 & info->cable_det_mask;
if (tx_5v) {
@@ -1994,39 +2219,12 @@ static int adv76xx_get_edid(struct v4l2_subdev *sd, struct v4l2_edid *edid)
return 0;
}
-static int get_edid_spa_location(const u8 *edid)
-{
- u8 d;
-
- if ((edid[0x7e] != 1) ||
- (edid[0x80] != 0x02) ||
- (edid[0x81] != 0x03)) {
- return -1;
- }
-
- /* search Vendor Specific Data Block (tag 3) */
- d = edid[0x82] & 0x7f;
- if (d > 4) {
- int i = 0x84;
- int end = 0x80 + d;
-
- do {
- u8 tag = edid[i] >> 5;
- u8 len = edid[i] & 0x1f;
-
- if ((tag == 3) && (len >= 5))
- return i + 4;
- i += len + 1;
- } while (i < end);
- }
- return -1;
-}
-
static int adv76xx_set_edid(struct v4l2_subdev *sd, struct v4l2_edid *edid)
{
struct adv76xx_state *state = to_state(sd);
const struct adv76xx_chip_info *info = state->info;
- int spa_loc;
+ unsigned spa_loc;
+ u16 pa;
int err;
int i;
@@ -2057,6 +2255,10 @@ static int adv76xx_set_edid(struct v4l2_subdev *sd, struct v4l2_edid *edid)
edid->blocks = 2;
return -E2BIG;
}
+ pa = cec_get_edid_phys_addr(edid->edid, edid->blocks * 128, &spa_loc);
+ err = cec_phys_addr_validate(pa, &pa, NULL);
+ if (err)
+ return err;
v4l2_dbg(2, debug, sd, "%s: write EDID pad %d, edid.present = 0x%x\n",
__func__, edid->pad, state->edid.present);
@@ -2066,9 +2268,12 @@ static int adv76xx_set_edid(struct v4l2_subdev *sd, struct v4l2_edid *edid)
adv76xx_set_hpd(state, 0);
rep_write_clr_set(sd, info->edid_enable_reg, 0x0f, 0x00);
- spa_loc = get_edid_spa_location(edid->edid);
- if (spa_loc < 0)
- spa_loc = 0xc0; /* Default value [REF_02, p. 116] */
+ /*
+ * Return an error if no location of the source physical address
+ * was found.
+ */
+ if (spa_loc == 0)
+ return -EINVAL;
switch (edid->pad) {
case ADV76XX_PAD_HDMI_PORT_A:
@@ -2128,6 +2333,7 @@ static int adv76xx_set_edid(struct v4l2_subdev *sd, struct v4l2_edid *edid)
v4l2_err(sd, "error enabling edid (0x%x)\n", state->edid.present);
return -EIO;
}
+ cec_s_phys_addr(state->cec_adap, pa, false);
/* enable hotplug after 100 ms */
queue_delayed_work(state->work_queues,
@@ -2252,8 +2458,19 @@ static int adv76xx_log_status(struct v4l2_subdev *sd)
((edid_enabled & 0x02) ? "Yes" : "No"),
((edid_enabled & 0x04) ? "Yes" : "No"),
((edid_enabled & 0x08) ? "Yes" : "No"));
- v4l2_info(sd, "CEC: %s\n", !!(cec_read(sd, 0x2a) & 0x01) ?
+ v4l2_info(sd, "CEC: %s\n", state->cec_enabled_adap ?
"enabled" : "disabled");
+ if (state->cec_enabled_adap) {
+ int i;
+
+ for (i = 0; i < ADV76XX_MAX_ADDRS; i++) {
+ bool is_valid = state->cec_valid_addrs & (1 << i);
+
+ if (is_valid)
+ v4l2_info(sd, "CEC Logical Address: 0x%x\n",
+ state->cec_addr[i]);
+ }
+ }
v4l2_info(sd, "-----Signal status-----\n");
cable_det = info->read_cable_det(sd);
@@ -2363,6 +2580,24 @@ static int adv76xx_subscribe_event(struct v4l2_subdev *sd,
}
}
+static int adv76xx_registered(struct v4l2_subdev *sd)
+{
+ struct adv76xx_state *state = to_state(sd);
+ int err;
+
+ err = cec_register_adapter(state->cec_adap);
+ if (err)
+ cec_delete_adapter(state->cec_adap);
+ return err;
+}
+
+static void adv76xx_unregistered(struct v4l2_subdev *sd)
+{
+ struct adv76xx_state *state = to_state(sd);
+
+ cec_unregister_adapter(state->cec_adap);
+}
+
/* ----------------------------------------------------------------------- */
static const struct v4l2_ctrl_ops adv76xx_ctrl_ops = {
@@ -2441,6 +2676,11 @@ static const struct v4l2_ctrl_config adv76xx_ctrl_free_run_color = {
.def = 0x0,
};
+static const struct v4l2_subdev_internal_ops adv76xx_int_ops = {
+ .registered = adv76xx_registered,
+ .unregistered = adv76xx_unregistered,
+};
+
/* ----------------------------------------------------------------------- */
static int adv76xx_core_init(struct v4l2_subdev *sd)
@@ -3069,6 +3309,7 @@ static int adv76xx_probe(struct i2c_client *client,
id->name, i2c_adapter_id(client->adapter),
client->addr);
sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS;
+ sd->internal_ops = &adv76xx_int_ops;
/* Configure IO Regmap region */
err = configure_regmap(state, ADV76XX_PAGE_IO);
@@ -3220,6 +3461,18 @@ static int adv76xx_probe(struct i2c_client *client,
err = adv76xx_core_init(sd);
if (err)
goto err_entity;
+
+#if IS_ENABLED(CONFIG_VIDEO_ADV7604_CEC)
+ state->cec_adap = cec_allocate_adapter(&adv76xx_cec_adap_ops,
+ state, dev_name(&client->dev),
+ CEC_CAP_TRANSMIT | CEC_CAP_LOG_ADDRS |
+ CEC_CAP_PASSTHROUGH | CEC_CAP_RC, ADV76XX_MAX_ADDRS,
+ &client->dev);
+ err = PTR_ERR_OR_ZERO(state->cec_adap);
+ if (err)
+ goto err_entity;
+#endif
+
v4l2_info(sd, "%s found @ 0x%x (%s)\n", client->name,
client->addr << 1, client->adapter->name);
@@ -3248,6 +3501,13 @@ static int adv76xx_remove(struct i2c_client *client)
struct v4l2_subdev *sd = i2c_get_clientdata(client);
struct adv76xx_state *state = to_state(sd);
+ /* disable interrupts */
+ io_write(sd, 0x40, 0);
+ io_write(sd, 0x41, 0);
+ io_write(sd, 0x46, 0);
+ io_write(sd, 0x6e, 0);
+ io_write(sd, 0x73, 0);
+
cancel_delayed_work(&state->delayed_work_enable_hotplug);
destroy_workqueue(state->work_queues);
v4l2_async_unregister_subdev(sd);
--
2.8.1
More information about the dri-devel
mailing list