[PATCH v2 1/8] drm/rect: Add some drm_clip_rect utility functions
Noralf Trønnes
noralf at tronnes.org
Mon Apr 25 14:03:13 UTC 2016
Den 25.04.2016 15:02, skrev Ville Syrjälä:
> On Mon, Apr 25, 2016 at 02:55:52PM +0200, Noralf Trønnes wrote:
>> Den 25.04.2016 14:39, skrev Ville Syrjälä:
>>> On Sun, Apr 24, 2016 at 10:48:55PM +0200, Noralf Trønnes wrote:
>>>> Add some utility functions for struct drm_clip_rect.
>>> Looks like mostly you're just duplicating the drm_rect stuff. Why can't
>>> you use what's there already?
>> That's because the framebuffer flushing uses drm_clip_rect and not drm_rect:
> Converting to drm_rect is not an option?
That's difficult or at least verbose to do because clips is an array.
I could use drm_rect on the calling side (fbdev) since it's only one clip
which the changes are merged into, and then convert it when I call dirty().
But the driver can get zero or more clips from the dirty ioctl so I don't
see a clean way to convert this array to drm_rect without more code than
this proposal has.
Here's the driver side:
static int mipi_dbi_dirtyfb(struct drm_framebuffer *fb, void *vmem,
unsigned flags, unsigned color,
struct drm_clip_rect *clips, unsigned num_clips)
{
struct tinydrm_device *tdev = fb->dev->dev_private;
struct lcdreg *reg = tdev->lcdreg;
struct drm_clip_rect full_clip = {
.x1 = 0,
.x2 = fb->width,
.y1 = 0,
.y2 = fb->height,
};
struct drm_clip_rect clip;
int ret;
drm_clip_rect_reset(&clip);
drm_clip_rect_merge(&clip, clips, num_clips, flags,
fb->width, fb->height);
if (!drm_clip_rect_intersect(&clip, &full_clip)) {
DRM_DEBUG_KMS("Empty clip\n");
return -EINVAL;
}
[...]
>> struct drm_framebuffer_funcs {
>> [...]
>> int (*dirty)(struct drm_framebuffer *framebuffer,
>> struct drm_file *file_priv, unsigned flags,
>> unsigned color, struct drm_clip_rect *clips,
>> unsigned num_clips);
>> };
>>
>>>> Signed-off-by: Noralf Trønnes <noralf at tronnes.org>
>>>> ---
>>>> drivers/gpu/drm/drm_rect.c | 67 ++++++++++++++++++++++++++++++++++++++++++++
>>>> include/drm/drm_rect.h | 69 ++++++++++++++++++++++++++++++++++++++++++++++
>>>> 2 files changed, 136 insertions(+)
>>>>
>>>> diff --git a/drivers/gpu/drm/drm_rect.c b/drivers/gpu/drm/drm_rect.c
>>>> index a8e2c86..a9fb1a8 100644
>>>> --- a/drivers/gpu/drm/drm_rect.c
>>>> +++ b/drivers/gpu/drm/drm_rect.c
>>>> @@ -434,3 +434,70 @@ void drm_rect_rotate_inv(struct drm_rect *r,
>>>> }
>>>> }
>>>> EXPORT_SYMBOL(drm_rect_rotate_inv);
>>>> +
>>>> +/**
>>>> + * drm_clip_rect_intersect - intersect two clip rectangles
>>>> + * @r1: first clip rectangle
>>>> + * @r2: second clip rectangle
>>>> + *
>>>> + * Calculate the intersection of clip rectangles @r1 and @r2.
>>>> + * @r1 will be overwritten with the intersection.
>>>> + *
>>>> + * RETURNS:
>>>> + * %true if rectangle @r1 is still visible after the operation,
>>>> + * %false otherwise.
>>>> + */
>>>> +bool drm_clip_rect_intersect(struct drm_clip_rect *r1,
>>>> + const struct drm_clip_rect *r2)
>>>> +{
>>>> + r1->x1 = max(r1->x1, r2->x1);
>>>> + r1->y1 = max(r1->y1, r2->y1);
>>>> + r1->x2 = min(r1->x2, r2->x2);
>>>> + r1->y2 = min(r1->y2, r2->y2);
>>>> +
>>>> + return drm_clip_rect_visible(r1);
>>>> +}
>>>> +EXPORT_SYMBOL(drm_clip_rect_intersect);
>>>> +
>>>> +/**
>>>> + * drm_clip_rect_merge - Merge clip rectangles
>>>> + * @dst: destination clip rectangle
>>>> + * @src: source clip rectangle(s), can be NULL
>>>> + * @num_clips: number of source clip rectangles
>>>> + * @flags: drm_mode_fb_dirty_cmd flags (DRM_MODE_FB_DIRTY_ANNOTATE_COPY)
>>>> + * @width: width of clip rectangle if @src is NULL
>>>> + * @height: height of clip rectangle if @src is NULL
>>>> + *
>>>> + * The dirtyfb ioctl allows for a NULL clip rectangle to be passed in,
>>>> + * so if @src is NULL, width and height is used to set a full clip rectangle.
>>>> + * @dst takes part in the merge unless it is empty {0,0,0,0}.
>>>> + */
>>>> +void drm_clip_rect_merge(struct drm_clip_rect *dst,
>>>> + struct drm_clip_rect *src, unsigned num_clips,
>>>> + unsigned flags, u32 width, u32 height)
>>>> +{
>>>> + int i;
>>>> +
>>>> + if (!src || !num_clips) {
>>>> + dst->x1 = 0;
>>>> + dst->x2 = width;
>>>> + dst->y1 = 0;
>>>> + dst->y2 = height;
>>>> + return;
>>>> + }
>>>> +
>>>> + if (drm_clip_rect_is_empty(dst)) {
>>>> + dst->x1 = ~0;
>>>> + dst->y1 = ~0;
>>>> + }
>>>> +
>>>> + for (i = 0; i < num_clips; i++) {
>>>> + if (flags & DRM_MODE_FB_DIRTY_ANNOTATE_COPY)
>>>> + i++;
>>>> + dst->x1 = min(dst->x1, src[i].x1);
>>>> + dst->x2 = max(dst->x2, src[i].x2);
>>>> + dst->y1 = min(dst->y1, src[i].y1);
>>>> + dst->y2 = max(dst->y2, src[i].y2);
>>>> + }
>>>> +}
>>>> +EXPORT_SYMBOL(drm_clip_rect_merge);
>>>> diff --git a/include/drm/drm_rect.h b/include/drm/drm_rect.h
>>>> index 83bb156..936ad8d 100644
>>>> --- a/include/drm/drm_rect.h
>>>> +++ b/include/drm/drm_rect.h
>>>> @@ -24,6 +24,8 @@
>>>> #ifndef DRM_RECT_H
>>>> #define DRM_RECT_H
>>>>
>>>> +#include <uapi/drm/drm.h>
>>>> +
>>>> /**
>>>> * DOC: rect utils
>>>> *
>>>> @@ -171,4 +173,71 @@ void drm_rect_rotate_inv(struct drm_rect *r,
>>>> int width, int height,
>>>> unsigned int rotation);
>>>>
>>>> +/**
>>>> + * drm_clip_rect_width - determine the clip rectangle width
>>>> + * @r: clip rectangle whose width is returned
>>>> + *
>>>> + * RETURNS:
>>>> + * The width of the clip rectangle.
>>>> + */
>>>> +static inline int drm_clip_rect_width(const struct drm_clip_rect *r)
>>>> +{
>>>> + return r->x2 - r->x1;
>>>> +}
>>>> +
>>>> +/**
>>>> + * drm_clip_rect_height - determine the clip rectangle height
>>>> + * @r: clip rectangle whose height is returned
>>>> + *
>>>> + * RETURNS:
>>>> + * The height of the clip rectangle.
>>>> + */
>>>> +static inline int drm_clip_rect_height(const struct drm_clip_rect *r)
>>>> +{
>>>> + return r->y2 - r->y1;
>>>> +}
>>>> +
>>>> +/**
>>>> + * drm_clip_rect_visible - determine if the the clip rectangle is visible
>>>> + * @r: clip rectangle whose visibility is returned
>>>> + *
>>>> + * RETURNS:
>>>> + * %true if the clip rectangle is visible, %false otherwise.
>>>> + */
>>>> +static inline bool drm_clip_rect_visible(const struct drm_clip_rect *r)
>>>> +{
>>>> + return drm_clip_rect_width(r) > 0 && drm_clip_rect_height(r) > 0;
>>>> +}
>>>> +
>>>> +/**
>>>> + * drm_clip_rect_reset - Reset clip rectangle
>>>> + * @clip: clip rectangle
>>>> + *
>>>> + * Sets clip rectangle to {0,0,0,0}.
>>>> + */
>>>> +static inline void drm_clip_rect_reset(struct drm_clip_rect *clip)
>>>> +{
>>>> + clip->x1 = 0;
>>>> + clip->x2 = 0;
>>>> + clip->y1 = 0;
>>>> + clip->y2 = 0;
>>>> +}
>>>> +
>>>> +/**
>>>> + * drm_clip_rect_is_empty - Is clip rectangle empty?
>>>> + * @clip: clip rectangle
>>>> + *
>>>> + * Returns true if clip rectangle is {0,0,0,0}.
>>>> + */
>>>> +static inline bool drm_clip_rect_is_empty(struct drm_clip_rect *clip)
>>>> +{
>>>> + return (!clip->x1 && !clip->x2 && !clip->y1 && !clip->y2);
>>>> +}
>>>> +
>>>> +bool drm_clip_rect_intersect(struct drm_clip_rect *r1,
>>>> + const struct drm_clip_rect *r2);
>>>> +void drm_clip_rect_merge(struct drm_clip_rect *dst,
>>>> + struct drm_clip_rect *src, unsigned num_clips,
>>>> + unsigned flags, u32 width, u32 height);
>>>> +
>>>> #endif
>>>> --
>>>> 2.2.2
>>>>
>>>> _______________________________________________
>>>> dri-devel mailing list
>>>> dri-devel at lists.freedesktop.org
>>>> https://lists.freedesktop.org/mailman/listinfo/dri-devel
More information about the dri-devel
mailing list