[PATCH v2 4/8] drm/fb-helper: Add fb_deferred_io support
Noralf Trønnes
noralf at tronnes.org
Tue Apr 26 16:24:54 UTC 2016
Den 25.04.2016 11:09, skrev Daniel Vetter:
> On Sun, Apr 24, 2016 at 10:48:58PM +0200, Noralf Trønnes wrote:
>> This adds deferred io support if CONFIG_FB_DEFERRED_IO is enabled.
>> The fbdev framebuffer changes are flushed using the callback
>> (struct drm_framebuffer *)->funcs->dirty() by a dedicated worker
>> ensuring that it always runs in process context.
>>
>> Signed-off-by: Noralf Trønnes <noralf at tronnes.org>
>> ---
>>
>> Changes since v1:
>> - Use a dedicated worker to run the framebuffer flushing like qxl does
>> - Add parameter descriptions to drm_fb_helper_deferred_io
>>
>> drivers/gpu/drm/drm_fb_helper.c | 127 +++++++++++++++++++++++++++++++++++++++-
>> include/drm/drm_fb_helper.h | 17 ++++++
>> 2 files changed, 143 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c
>> index 855108e..46ee6f8 100644
>> --- a/drivers/gpu/drm/drm_fb_helper.c
>> +++ b/drivers/gpu/drm/drm_fb_helper.c
>> @@ -40,6 +40,7 @@
>> #include <drm/drm_crtc_helper.h>
>> #include <drm/drm_atomic.h>
>> #include <drm/drm_atomic_helper.h>
>> +#include <drm/drm_rect.h>
>>
>> static bool drm_fbdev_emulation = true;
>> module_param_named(fbdev_emulation, drm_fbdev_emulation, bool, 0600);
>> @@ -48,6 +49,10 @@ MODULE_PARM_DESC(fbdev_emulation,
>>
>> static LIST_HEAD(kernel_fb_helper_list);
>>
>> +static void drm_fb_helper_dirty_init(struct drm_fb_helper *helper);
>> +static void drm_fb_helper_dirty(struct fb_info *info, u32 x, u32 y,
>> + u32 width, u32 height);
>> +
>> /**
>> * DOC: fbdev helpers
>> *
>> @@ -84,6 +89,16 @@ static LIST_HEAD(kernel_fb_helper_list);
>> * and set up an initial configuration using the detected hardware, drivers
>> * should call drm_fb_helper_single_add_all_connectors() followed by
>> * drm_fb_helper_initial_config().
>> + *
>> + * If CONFIG_FB_DEFERRED_IO is enabled and
>> + * (struct drm_framebuffer *)->funcs->dirty is set, the
>> + * drm_fb_helper_{cfb,sys}_{write,fillrect,copyarea,imageblit} functions
>> + * will accumulate changes and schedule (struct fb_helper).dirty_work to run
>> + * right away. This worker then calls the dirty() function ensuring that it
>> + * will always run in process context since the fb_*() function could be
>> + * running in atomic context. If drm_fb_helper_deferred_io() is used as the
>> + * deferred_io callback it will also schedule dirty_work with the damage
>> + * collected from the mmap page writes.
> One thing to consider (and personally I don't care either way) is whether
> we shouldn't just select CONFIG_FB_DEFERRED_IO if the fbdev helpers are
> enabled. Pushing that out to drivers is imo a bit fragile.
>
> But like I said I'm ok with either way.
My concern was adding code and data that only a few drivers would
actually use. But of course there's the tradeoff with complexity.
I use this to enable it:
select FB_DEFERRED_IO if DRM_KMS_FB_HELPER
I guess the maintainer has to make this choice between size and
complexity :-)
I can enable it by default if you want, drm is both huge and complex so I
don't know what's best.
As a sidenote, I have also put all the fbdev code in a file of it's own to
make it simple with regards to the DRM_FBDEV_EMULATION user option:
tinydrm-$(CONFIG_DRM_KMS_FB_HELPER) += tinydrm-fbdev.o
>> */
>>
>> /**
>> @@ -401,11 +416,14 @@ backoff:
>> static int restore_fbdev_mode(struct drm_fb_helper *fb_helper)
>> {
>> struct drm_device *dev = fb_helper->dev;
>> + struct fb_info *info = fb_helper->fbdev;
>> struct drm_plane *plane;
>> int i;
>>
>> drm_warn_on_modeset_not_all_locked(dev);
>>
>> + drm_fb_helper_dirty(info, 0, 0, info->var.xres, info->var.yres);
> Why is this needed? If you do a modeset (or pageflip or whatever) drivers
> are supposed to re-upload the entire screen. We've talked about adding a
> dirty rectangle to atomic to allow userspace to optimize this, but there
> should _never_ be a need to do a dirtyfb call around a modeset. Probably
> just a driver bug in your panel drm drivers?
Ok, in tinydrm I now set a flag in &drm_simple_display_pipe_funcs
->plane_update to indicate that the next dirty() should do the whole
framebuffer which seems to work fine.
Should I actually perform the update as well?
If so I would need to add a worker in tinydrm to do that.
Noralf.
> With the above line removed:
>
> Reviewed-by: Daniel Vetter <daniel.vetter at ffwll.ch>
>
>> +
>> if (fb_helper->atomic)
>> return restore_fbdev_mode_atomic(fb_helper);
>>
>> @@ -650,6 +668,7 @@ void drm_fb_helper_prepare(struct drm_device *dev, struct drm_fb_helper *helper,
>> const struct drm_fb_helper_funcs *funcs)
>> {
>> INIT_LIST_HEAD(&helper->kernel_fb_list);
>> + drm_fb_helper_dirty_init(helper);
>> helper->funcs = funcs;
>> helper->dev = dev;
>> }
>> @@ -834,6 +853,93 @@ void drm_fb_helper_unlink_fbi(struct drm_fb_helper *fb_helper)
>> }
>> EXPORT_SYMBOL(drm_fb_helper_unlink_fbi);
>>
>> +#ifdef CONFIG_FB_DEFERRED_IO
>> +static void drm_fb_helper_dirty_work(struct work_struct *work)
>> +{
>> + struct drm_fb_helper *helper = container_of(work, struct drm_fb_helper,
>> + dirty_work);
>> + struct drm_clip_rect clip;
>> + unsigned long flags;
>> +
>> + spin_lock_irqsave(&helper->dirty_lock, flags);
>> + clip = helper->dirty_clip;
>> + drm_clip_rect_reset(&helper->dirty_clip);
>> + spin_unlock_irqrestore(&helper->dirty_lock, flags);
>> +
>> + helper->fb->funcs->dirty(helper->fb, NULL, 0, 0, &clip, 1);
>> +}
>> +
>> +static void drm_fb_helper_dirty_init(struct drm_fb_helper *helper)
>> +{
>> + spin_lock_init(&helper->dirty_lock);
>> + INIT_WORK(&helper->dirty_work, drm_fb_helper_dirty_work);
>> +}
>> +
>> +static void drm_fb_helper_dirty(struct fb_info *info, u32 x, u32 y,
>> + u32 width, u32 height)
>> +{
>> + struct drm_fb_helper *helper = info->par;
>> + struct drm_clip_rect clip;
>> + unsigned long flags;
>> +
>> + if (!helper->fb->funcs->dirty)
>> + return;
>> +
>> + clip.x1 = x;
>> + clip.x2 = x + width;
>> + clip.y1 = y;
>> + clip.y2 = y + height;
>> +
>> + spin_lock_irqsave(&helper->dirty_lock, flags);
>> + drm_clip_rect_merge(&helper->dirty_clip, &clip, 1, 0, 0, 0);
>> + spin_unlock_irqrestore(&helper->dirty_lock, flags);
>> +
>> + schedule_work(&helper->dirty_work);
>> +}
>> +
>> +/**
>> + * drm_fb_helper_deferred_io() - fbdev deferred_io callback function
>> + * @info: fb_info struct pointer
>> + * @pagelist: list of dirty mmap framebuffer pages
>> + *
>> + * This function is used as the (struct fb_deferred_io *)->deferred_io
>> + * callback function for flushing the fbdev mmap writes.
>> + */
>> +void drm_fb_helper_deferred_io(struct fb_info *info,
>> + struct list_head *pagelist)
>> +{
>> + unsigned long start, end, min, max;
>> + struct page *page;
>> + u32 y1, y2;
>> +
>> + min = ULONG_MAX;
>> + max = 0;
>> + list_for_each_entry(page, pagelist, lru) {
>> + start = page->index << PAGE_SHIFT;
>> + end = start + PAGE_SIZE - 1;
>> + min = min(min, start);
>> + max = max(max, end);
>> + }
>> +
>> + if (min < max) {
>> + y1 = min / info->fix.line_length;
>> + y2 = min_t(u32, max / info->fix.line_length, info->var.yres);
>> + drm_fb_helper_dirty(info, 0, y1, info->var.xres, y2 - y1);
>> + }
>> +}
>> +EXPORT_SYMBOL(drm_fb_helper_deferred_io);
>> +
>> +#else
>> +static void drm_fb_helper_dirty_init(struct drm_fb_helper *helper)
>> +{
>> +}
>> +
>> +static void drm_fb_helper_dirty(struct fb_info *info, u32 x, u32 y,
>> + u32 width, u32 height)
>> +{
>> +}
>> +#endif /* CONFIG_FB_DEFERRED_IO */
>> +
>> /**
>> * drm_fb_helper_sys_read - wrapper around fb_sys_read
>> * @info: fb_info struct pointer
>> @@ -862,7 +968,14 @@ EXPORT_SYMBOL(drm_fb_helper_sys_read);
>> ssize_t drm_fb_helper_sys_write(struct fb_info *info, const char __user *buf,
>> size_t count, loff_t *ppos)
>> {
>> - return fb_sys_write(info, buf, count, ppos);
>> + ssize_t ret;
>> +
>> + ret = fb_sys_write(info, buf, count, ppos);
>> + if (ret > 0)
>> + drm_fb_helper_dirty(info, 0, 0, info->var.xres,
>> + info->var.yres);
>> +
>> + return ret;
>> }
>> EXPORT_SYMBOL(drm_fb_helper_sys_write);
>>
>> @@ -877,6 +990,8 @@ void drm_fb_helper_sys_fillrect(struct fb_info *info,
>> const struct fb_fillrect *rect)
>> {
>> sys_fillrect(info, rect);
>> + drm_fb_helper_dirty(info, rect->dx, rect->dy,
>> + rect->width, rect->height);
>> }
>> EXPORT_SYMBOL(drm_fb_helper_sys_fillrect);
>>
>> @@ -891,6 +1006,8 @@ void drm_fb_helper_sys_copyarea(struct fb_info *info,
>> const struct fb_copyarea *area)
>> {
>> sys_copyarea(info, area);
>> + drm_fb_helper_dirty(info, area->dx, area->dy,
>> + area->width, area->height);
>> }
>> EXPORT_SYMBOL(drm_fb_helper_sys_copyarea);
>>
>> @@ -905,6 +1022,8 @@ void drm_fb_helper_sys_imageblit(struct fb_info *info,
>> const struct fb_image *image)
>> {
>> sys_imageblit(info, image);
>> + drm_fb_helper_dirty(info, image->dx, image->dy,
>> + image->width, image->height);
>> }
>> EXPORT_SYMBOL(drm_fb_helper_sys_imageblit);
>>
>> @@ -919,6 +1038,8 @@ void drm_fb_helper_cfb_fillrect(struct fb_info *info,
>> const struct fb_fillrect *rect)
>> {
>> cfb_fillrect(info, rect);
>> + drm_fb_helper_dirty(info, rect->dx, rect->dy,
>> + rect->width, rect->height);
>> }
>> EXPORT_SYMBOL(drm_fb_helper_cfb_fillrect);
>>
>> @@ -933,6 +1054,8 @@ void drm_fb_helper_cfb_copyarea(struct fb_info *info,
>> const struct fb_copyarea *area)
>> {
>> cfb_copyarea(info, area);
>> + drm_fb_helper_dirty(info, area->dx, area->dy,
>> + area->width, area->height);
>> }
>> EXPORT_SYMBOL(drm_fb_helper_cfb_copyarea);
>>
>> @@ -947,6 +1070,8 @@ void drm_fb_helper_cfb_imageblit(struct fb_info *info,
>> const struct fb_image *image)
>> {
>> cfb_imageblit(info, image);
>> + drm_fb_helper_dirty(info, image->dx, image->dy,
>> + image->width, image->height);
>> }
>> EXPORT_SYMBOL(drm_fb_helper_cfb_imageblit);
>>
>> diff --git a/include/drm/drm_fb_helper.h b/include/drm/drm_fb_helper.h
>> index 062723b..dde825c 100644
>> --- a/include/drm/drm_fb_helper.h
>> +++ b/include/drm/drm_fb_helper.h
>> @@ -172,6 +172,10 @@ struct drm_fb_helper_connector {
>> * @funcs: driver callbacks for fb helper
>> * @fbdev: emulated fbdev device info struct
>> * @pseudo_palette: fake palette of 16 colors
>> + * @dirty_clip: clip rectangle used with deferred_io to accumulate damage to
>> + * the screen buffer
>> + * @dirty_lock: spinlock protecting @dirty_clip
>> + * @dirty_work: worker used to flush the framebuffer
>> *
>> * This is the main structure used by the fbdev helpers. Drivers supporting
>> * fbdev emulation should embedded this into their overall driver structure.
>> @@ -189,6 +193,11 @@ struct drm_fb_helper {
>> const struct drm_fb_helper_funcs *funcs;
>> struct fb_info *fbdev;
>> u32 pseudo_palette[17];
>> +#ifdef CONFIG_FB_DEFERRED_IO
>> + struct drm_clip_rect dirty_clip;
>> + spinlock_t dirty_lock;
>> + struct work_struct dirty_work;
>> +#endif
>>
>> /**
>> * @kernel_fb_list:
>> @@ -245,6 +254,9 @@ void drm_fb_helper_fill_fix(struct fb_info *info, uint32_t pitch,
>>
>> void drm_fb_helper_unlink_fbi(struct drm_fb_helper *fb_helper);
>>
>> +void drm_fb_helper_deferred_io(struct fb_info *info,
>> + struct list_head *pagelist);
>> +
>> ssize_t drm_fb_helper_sys_read(struct fb_info *info, char __user *buf,
>> size_t count, loff_t *ppos);
>> ssize_t drm_fb_helper_sys_write(struct fb_info *info, const char __user *buf,
>> @@ -368,6 +380,11 @@ static inline void drm_fb_helper_unlink_fbi(struct drm_fb_helper *fb_helper)
>> {
>> }
>>
>> +static inline void drm_fb_helper_deferred_io(struct fb_info *info,
>> + struct list_head *pagelist)
>> +{
>> +}
>> +
>> static inline ssize_t drm_fb_helper_sys_read(struct fb_info *info,
>> char __user *buf, size_t count,
>> loff_t *ppos)
>> --
>> 2.2.2
>>
More information about the dri-devel
mailing list