[PATCH 20/23] drm: omapdrm: panel-lgphilips-lb035q02: Remove unused backlight GPIO

Laurent Pinchart laurent.pinchart at ideasonboard.com
Tue Apr 26 20:35:42 UTC 2016


The backlight GPIO was supported with platform data only. Now that the
driver only supports DT, the backlight GPIO is never initialized. Remove
it.

Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
---
 .../drm/omapdrm/displays/panel-lgphilips-lb035q02.c   | 19 -------------------
 1 file changed, 19 deletions(-)

diff --git a/drivers/gpu/drm/omapdrm/displays/panel-lgphilips-lb035q02.c b/drivers/gpu/drm/omapdrm/displays/panel-lgphilips-lb035q02.c
index 458f77bc473d..9b52ccf22764 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-lgphilips-lb035q02.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-lgphilips-lb035q02.c
@@ -50,9 +50,6 @@ struct panel_drv_data {
 
 	struct omap_video_timings videomode;
 
-	/* used for non-DT boot, to be removed */
-	int backlight_gpio;
-
 	struct gpio_desc *enable_gpio;
 };
 
@@ -170,9 +167,6 @@ static int lb035q02_enable(struct omap_dss_device *dssdev)
 	if (ddata->enable_gpio)
 		gpiod_set_value_cansleep(ddata->enable_gpio, 1);
 
-	if (gpio_is_valid(ddata->backlight_gpio))
-		gpio_set_value_cansleep(ddata->backlight_gpio, 1);
-
 	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
 
 	return 0;
@@ -189,9 +183,6 @@ static void lb035q02_disable(struct omap_dss_device *dssdev)
 	if (ddata->enable_gpio)
 		gpiod_set_value_cansleep(ddata->enable_gpio, 0);
 
-	if (gpio_is_valid(ddata->backlight_gpio))
-		gpio_set_value_cansleep(ddata->backlight_gpio, 0);
-
 	in->ops.dpi->disable(in);
 
 	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
@@ -255,8 +246,6 @@ static int lb035q02_probe_of(struct spi_device *spi)
 
 	ddata->enable_gpio = gpio;
 
-	ddata->backlight_gpio = -ENOENT;
-
 	in = omapdss_of_find_source_for_first_ep(node);
 	if (IS_ERR(in)) {
 		dev_err(&spi->dev, "failed to find video source\n");
@@ -289,13 +278,6 @@ static int lb035q02_panel_spi_probe(struct spi_device *spi)
 	if (r)
 		return r;
 
-	if (gpio_is_valid(ddata->backlight_gpio)) {
-		r = devm_gpio_request_one(&spi->dev, ddata->backlight_gpio,
-				GPIOF_OUT_INIT_LOW, "panel backlight");
-		if (r)
-			goto err_gpio;
-	}
-
 	ddata->videomode = lb035q02_timings;
 
 	dssdev = &ddata->dssdev;
@@ -315,7 +297,6 @@ static int lb035q02_panel_spi_probe(struct spi_device *spi)
 	return 0;
 
 err_reg:
-err_gpio:
 	omap_dss_put_device(ddata->in);
 	return r;
 }
-- 
2.7.3



More information about the dri-devel mailing list