[PATCH 2/4] drm: Add aspect ratio parsing in DRM layer
Shashank Sharma
shashank.sharma at intel.com
Wed Aug 3 10:56:26 UTC 2016
Current DRM layer functions dont parse aspect ratio information
while converting a user mode->kernel mode or viceversa. This
causes modeset to pick mode with wrong aspect ratio, eventually
cauing failures in HDMI compliance test cases, due to wrong VIC.
This patch adds aspect ratio information in DRM's mode conversion
and mode comparision functions, to make sure kernel picks mode
with right aspect ratio (as per the VIC).
Signed-off-by: Shashank Sharma <shashank.sharma at intel.com>
Signed-off-by: Lin, Jia <lin.a.jia at intel.com>
Signed-off-by: Akashdeep Sharma <akashdeep.sharma at intel.com>
---
drivers/gpu/drm/drm_modes.c | 31 +++++++++++++++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index fc5040a..e6029e0 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -969,6 +969,7 @@ bool drm_mode_equal_no_clocks_no_stereo(const struct drm_display_mode *mode1,
mode1->vsync_end == mode2->vsync_end &&
mode1->vtotal == mode2->vtotal &&
mode1->vscan == mode2->vscan &&
+ mode1->picture_aspect_ratio == mode2->picture_aspect_ratio &&
(mode1->flags & ~DRM_MODE_FLAG_3D_MASK) ==
(mode2->flags & ~DRM_MODE_FLAG_3D_MASK))
return true;
@@ -1471,6 +1472,22 @@ void drm_mode_convert_to_umode(struct drm_mode_modeinfo *out,
out->vrefresh = in->vrefresh;
out->flags = in->flags;
out->type = in->type;
+ out->flags &= ~DRM_MODE_FLAG_PARMASK;
+
+ switch (in->picture_aspect_ratio) {
+ case HDMI_PICTURE_ASPECT_4_3:
+ out->flags |= DRM_MODE_FLAG_PAR4_3;
+ break;
+ case HDMI_PICTURE_ASPECT_16_9:
+ out->flags |= DRM_MODE_FLAG_PAR16_9;
+ break;
+ case HDMI_PICTURE_ASPECT_NONE:
+ case HDMI_PICTURE_ASPECT_RESERVED:
+ default:
+ out->flags |= DRM_MODE_FLAG_PARNONE;
+ break;
+ }
+
strncpy(out->name, in->name, DRM_DISPLAY_MODE_LEN);
out->name[DRM_DISPLAY_MODE_LEN-1] = 0;
}
@@ -1516,6 +1533,20 @@ int drm_mode_convert_umode(struct drm_display_mode *out,
strncpy(out->name, in->name, DRM_DISPLAY_MODE_LEN);
out->name[DRM_DISPLAY_MODE_LEN-1] = 0;
+ /* Clearing picture aspect ratio bits from out flags */
+ out->flags &= ~DRM_MODE_FLAG_PARMASK;
+
+ switch (in->flags & DRM_MODE_FLAG_PARMASK) {
+ case DRM_MODE_FLAG_PAR4_3:
+ out->picture_aspect_ratio |= HDMI_PICTURE_ASPECT_4_3;
+ break;
+ case DRM_MODE_FLAG_PAR16_9:
+ out->picture_aspect_ratio |= HDMI_PICTURE_ASPECT_16_9;
+ break;
+ default:
+ out->picture_aspect_ratio = HDMI_PICTURE_ASPECT_NONE;
+ }
+
out->status = drm_mode_validate_basic(out);
if (out->status != MODE_OK)
goto out;
--
1.9.1
More information about the dri-devel
mailing list