[GIT PULL] drm bridge drivers for 4.8 (updated)

[Laurent Pinchart]

Hi Archit,

On Tuesday 19 Jul 2016 12:06:41 Archit Taneja wrote:
> Hi Dave,
> 
> This is an update to the previous drm bridge pull request. The ADV7511
> driver's conversion from slave encoder to bridge meant that its users
> (the rcar-du kms driver) should use the bridge interface too. This pull
> request now also contains a commit that updates the rcar-du's hdmi encoder
> interface from slave encoder to bridge.
> 
> The other updates are as before:
> 
> - Converts the ADV7511 i2c slave encoder driver to a bridge driver.
>   Adds support for the ADV7533 bridge chip.
> - Add bridge driver for TC358767 (DSI/DPI to eDP) encoder chips.
> 
> Thanks,
> Archit
> 
> The following changes since commit 2ae995887830b335f9bdab3040018071da54bcdb:
> 
>   drm: Fix a typo in drm_ioctl.c (2016-06-30 12:04:44 +0300)
> 
> are available in the git repository at:
> 
>   https://github.com/boddob/linux.git drm_bridge_for_4.8
> 
> for you to fetch changes up to 1d926114d8f4e9f138617b95c6cd377667c36369:
> 
>   drm: rcar-du: Remove i2c slave encoder interface for hdmi encoder
> (2016-07-18 08:58:45 +0530)
> 
> ----------------------------------------------------------------
> Andrey Gusakov (1):
>       drm/bridge: tc358767: Add DPI to eDP bridge driver
> 
> Archit Taneja (9):
>       drm/i2c: adv7511: Convert to drm_bridge
>       drm/i2c: adv7511: Move to bridge folder
>       drm/bridge: adv7511: Fix mutex deadlock when interrupts are disabled
>       drm/bridge: adv7533: Initial support for ADV7533
>       drm/bridge: adv7533: Create a MIPI DSI device
>       drm/bridge: adv7533: Use internal timing generator
>       drm/bridge: adv7533: Change number of DSI lanes dynamically
>       dt-bindings: drm/bridge: Update bindings for ADV7533
>       drm: rcar-du: Remove i2c slave encoder interface for hdmi encoder

You've included the wrong version of that patch, it doesn't set encoder-
>bridge, breaking HDMI output for rcar-du-drm :-(

I'll send a fix shortly.

> Philipp Zabel (1):
>       dt-bindings: tc358767: add DT documentation
> 
>  .../bindings/display/bridge/adi,adv7511.txt        |   26 +-
>  .../bindings/display/bridge/toshiba,tc358767.txt   |   53 +
>  drivers/gpu/drm/bridge/Kconfig                     |   11 +
>  drivers/gpu/drm/bridge/Makefile                    |    2 +
>  drivers/gpu/drm/bridge/adv7511/Kconfig             |   15 +
>  drivers/gpu/drm/bridge/adv7511/Makefile            |    3 +
>  drivers/gpu/drm/{i2c => bridge/adv7511}/adv7511.h  |  103 ++
>  .../adv7511.c => bridge/adv7511/adv7511_drv.c}     |  324 +++--
>  drivers/gpu/drm/bridge/adv7511/adv7533.c           |  265 ++++
>  drivers/gpu/drm/bridge/tc358767.c                  | 1413 +++++++++++++++++
>  drivers/gpu/drm/i2c/Kconfig                        |    6 -
>  drivers/gpu/drm/i2c/Makefile                       |    2 -
>  drivers/gpu/drm/rcar-du/Makefile                   |    4 +-
>  drivers/gpu/drm/rcar-du/rcar_du_encoder.c          |    3 +-
>  drivers/gpu/drm/rcar-du/rcar_du_encoder.h          |    7 +-
>  drivers/gpu/drm/rcar-du/rcar_du_hdmicon.c          |  116 --
>  drivers/gpu/drm/rcar-du/rcar_du_hdmicon.h          |   31 -
>  drivers/gpu/drm/rcar-du/rcar_du_hdmienc.c          |   68 +-
>  18 files changed, 2120 insertions(+), 332 deletions(-)
>  create mode 100644
> Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt
> create mode 100644 drivers/gpu/drm/bridge/adv7511/Kconfig
>  create mode 100644 drivers/gpu/drm/bridge/adv7511/Makefile
>  rename drivers/gpu/drm/{i2c => bridge/adv7511}/adv7511.h (82%)
>  rename drivers/gpu/drm/{i2c/adv7511.c => bridge/adv7511/adv7511_drv.c}
> (80%) create mode 100644 drivers/gpu/drm/bridge/adv7511/adv7533.c
>  create mode 100644 drivers/gpu/drm/bridge/tc358767.c
>  delete mode 100644 drivers/gpu/drm/rcar-du/rcar_du_hdmicon.c
>  delete mode 100644 drivers/gpu/drm/rcar-du/rcar_du_hdmicon.h

-- 
Regards,

Laurent Pinchart