[PATCH 1/4] drm/i915/dp: Add debug messages to print DP link training pattern
Dhinakaran Pandiyan
dhinakaran.pandiyan at intel.com
Thu Aug 4 03:07:38 UTC 2016
Currently we do not print the training pattern used in any of the DP link
training stages. Including this piece of information in debug messages will
help debugging.
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan at intel.com>
---
drivers/gpu/drm/i915/intel_dp.c | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 21b04c3..3ca33bd 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -2547,6 +2547,10 @@ _intel_dp_set_link_train(struct intel_dp *intel_dp,
struct drm_i915_private *dev_priv = to_i915(dev);
enum port port = intel_dig_port->port;
+ if (dp_train_pat & DP_TRAINING_PATTERN_MASK)
+ DRM_DEBUG_KMS("Using DP training pattern TPS%d\n",
+ dp_train_pat & DP_TRAINING_PATTERN_MASK);
+
if (HAS_DDI(dev)) {
uint32_t temp = I915_READ(DP_TP_CTL(port));
@@ -2588,7 +2592,7 @@ _intel_dp_set_link_train(struct intel_dp *intel_dp,
*DP |= DP_LINK_TRAIN_PAT_2_CPT;
break;
case DP_TRAINING_PATTERN_3:
- DRM_ERROR("DP training pattern 3 not supported\n");
+ DRM_ERROR("TPS3 not supported, using TPS2 instead\n");
*DP |= DP_LINK_TRAIN_PAT_2_CPT;
break;
}
@@ -2613,7 +2617,7 @@ _intel_dp_set_link_train(struct intel_dp *intel_dp,
if (IS_CHERRYVIEW(dev)) {
*DP |= DP_LINK_TRAIN_PAT_3_CHV;
} else {
- DRM_ERROR("DP training pattern 3 not supported\n");
+ DRM_ERROR("TPS3 not supported, using TPS2 instead\n");
*DP |= DP_LINK_TRAIN_PAT_2;
}
break;
@@ -2629,11 +2633,8 @@ static void intel_dp_enable_port(struct intel_dp *intel_dp)
to_intel_crtc(dp_to_dig_port(intel_dp)->base.base.crtc);
/* enable with pattern 1 (as per spec) */
- _intel_dp_set_link_train(intel_dp, &intel_dp->DP,
- DP_TRAINING_PATTERN_1);
- I915_WRITE(intel_dp->output_reg, intel_dp->DP);
- POSTING_READ(intel_dp->output_reg);
+ intel_dp_program_link_training_pattern(intel_dp, DP_TRAINING_PATTERN_1);
/*
* Magic for VLV/CHV. We _must_ first set up the register
--
2.5.0
More information about the dri-devel
mailing list