[PATCH 1/6] drm: Add page_flip_target CRTC hook
Daniel Vetter
daniel at ffwll.ch
Thu Aug 4 10:47:38 UTC 2016
On Thu, Aug 04, 2016 at 12:39:36PM +0900, Michel Dänzer wrote:
> From: Michel Dänzer <michel.daenzer at amd.com>
>
> Mostly the same as the existing page_flip hook, but takes an additional
> parameter specifying the target vertical blank period when the flip
> should take effect.
>
> Signed-off-by: Michel Dänzer <michel.daenzer at amd.com>
> ---
> drivers/gpu/drm/drm_crtc.c | 23 +++++++++++++++++++----
> include/drm/drm_crtc.h | 14 ++++++++++++++
> 2 files changed, 33 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
> index 9d3f80e..15ad7e2 100644
> --- a/drivers/gpu/drm/drm_crtc.c
> +++ b/drivers/gpu/drm/drm_crtc.c
> @@ -5421,6 +5421,7 @@ int drm_mode_page_flip_ioctl(struct drm_device *dev,
> struct drm_crtc *crtc;
> struct drm_framebuffer *fb = NULL;
> struct drm_pending_vblank_event *e = NULL;
> + u32 target_vblank = 0;
> int ret = -EINVAL;
>
> if (page_flip->flags & ~DRM_MODE_PAGE_FLIP_FLAGS ||
> @@ -5434,6 +5435,18 @@ int drm_mode_page_flip_ioctl(struct drm_device *dev,
> if (!crtc)
> return -ENOENT;
>
> + if (crtc->funcs->page_flip_target) {
> + int r;
> +
> + r = drm_crtc_vblank_get(crtc);
This leaks when e.g framebuffer_lookup fails.
-Daniel
> + if (r)
> + return r;
> +
> + target_vblank = drm_crtc_vblank_count(crtc) +
> + !(page_flip->flags & DRM_MODE_PAGE_FLIP_ASYNC);
> + } else if (crtc->funcs->page_flip == NULL)
> + return -EINVAL;
> +
> drm_modeset_lock_crtc(crtc, crtc->primary);
> if (crtc->primary->fb == NULL) {
> /* The framebuffer is currently unbound, presumably
> @@ -5444,9 +5457,6 @@ int drm_mode_page_flip_ioctl(struct drm_device *dev,
> goto out;
> }
>
> - if (crtc->funcs->page_flip == NULL)
> - goto out;
> -
> fb = drm_framebuffer_lookup(dev, page_flip->fb_id);
> if (!fb) {
> ret = -ENOENT;
> @@ -5487,7 +5497,12 @@ int drm_mode_page_flip_ioctl(struct drm_device *dev,
> }
>
> crtc->primary->old_fb = crtc->primary->fb;
> - ret = crtc->funcs->page_flip(crtc, fb, e, page_flip->flags);
> + if (crtc->funcs->page_flip_target)
> + ret = crtc->funcs->page_flip_target(crtc, fb, e,
> + page_flip->flags,
> + target_vblank);
> + else
> + ret = crtc->funcs->page_flip(crtc, fb, e, page_flip->flags);
> if (ret) {
> if (page_flip->flags & DRM_MODE_PAGE_FLIP_EVENT)
> drm_event_cancel_free(dev, &e->base);
> diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
> index 9e6ab4a..ae1d9b6 100644
> --- a/include/drm/drm_crtc.h
> +++ b/include/drm/drm_crtc.h
> @@ -579,6 +579,20 @@ struct drm_crtc_funcs {
> uint32_t flags);
>
> /**
> + * @page_flip_target:
> + *
> + * Same as @page_flip but with an additional parameter specifying the
> + * target vertical blank period when the flip should take effect.
> + *
> + * Note that the core code calls drm_crtc_vblank_get before this entry
> + * point.
I think you should add "Drivers must drop that reference again by calling
drm_crtc_vblank_put()."
It's a bit icky that we have this difference (both compared to old page
flip, but also atomic doesn't grab a vblank reference either). But really
can't be avoided, at least if we implement the relative mode.
-Daniel
> + */
> + int (*page_flip_target)(struct drm_crtc *crtc,
> + struct drm_framebuffer *fb,
> + struct drm_pending_vblank_event *event,
> + uint32_t flags, uint32_t target);
> +
> + /**
> * @set_property:
> *
> * This is the legacy entry point to update a property attached to the
> --
> 2.8.1
>
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
More information about the dri-devel
mailing list