[PATCH 17/20] drm: Update connector documentation
Daniel Vetter
daniel.vetter at ffwll.ch
Tue Aug 9 13:41:28 UTC 2016
- Shuffle docs from drm-kms.rst into the structure docs where it makes
sense.
- Put the remaining bits into a new overview section.
One thing I've changed is around probing: Old docs says that you
_must_ use the probe helpers, which isn't correct. Helpers are always
optional.
Signed-off-by: Daniel Vetter <daniel.vetter at intel.com>
---
Documentation/gpu/drm-kms.rst | 170 ++--------------------------------------
drivers/gpu/drm/drm_connector.c | 31 ++++++++
include/drm/drm_connector.h | 55 ++++++++++++-
3 files changed, 92 insertions(+), 164 deletions(-)
diff --git a/Documentation/gpu/drm-kms.rst b/Documentation/gpu/drm-kms.rst
index 6e7ab57924f0..fa948b4e029b 100644
--- a/Documentation/gpu/drm-kms.rst
+++ b/Documentation/gpu/drm-kms.rst
@@ -110,8 +110,14 @@ Display Modes Function Reference
.. kernel-doc:: drivers/gpu/drm/drm_modes.c
:export:
-Connector Display Sink Abstraction
-==================================
+Connector Abstraction
+=====================
+
+.. kernel-doc:: drivers/gpu/drm/drm_connector.c
+ :doc: overview
+
+Connector Functions Reference
+-----------------------------
.. kernel-doc:: include/drm/drm_connector.h
:internal:
@@ -232,166 +238,6 @@ encoders unattached at initialization time. Applications (or the fbdev
compatibility layer when implemented) are responsible for attaching the
encoders they want to use to a CRTC.
-Connectors (:c:type:`struct drm_connector <drm_connector>`)
------------------------------------------------------------
-
-A connector is the final destination for pixel data on a device, and
-usually connects directly to an external display device like a monitor
-or laptop panel. A connector can only be attached to one encoder at a
-time. The connector is also the structure where information about the
-attached display is kept, so it contains fields for display data, EDID
-data, DPMS & connection status, and information about modes supported on
-the attached displays.
-
-Connector Initialization
-~~~~~~~~~~~~~~~~~~~~~~~~
-
-Finally a KMS driver must create, initialize, register and attach at
-least one :c:type:`struct drm_connector <drm_connector>`
-instance. The instance is created as other KMS objects and initialized
-by setting the following fields.
-
-interlace_allowed
- Whether the connector can handle interlaced modes.
-
-doublescan_allowed
- Whether the connector can handle doublescan.
-
-display_info
- Display information is filled from EDID information when a display
- is detected. For non hot-pluggable displays such as flat panels in
- embedded systems, the driver should initialize the
- display_info.width_mm and display_info.height_mm fields with the
- physical size of the display.
-
-polled
- Connector polling mode, a combination of
-
- DRM_CONNECTOR_POLL_HPD
- The connector generates hotplug events and doesn't need to be
- periodically polled. The CONNECT and DISCONNECT flags must not
- be set together with the HPD flag.
-
- DRM_CONNECTOR_POLL_CONNECT
- Periodically poll the connector for connection.
-
- DRM_CONNECTOR_POLL_DISCONNECT
- Periodically poll the connector for disconnection.
-
- Set to 0 for connectors that don't support connection status
- discovery.
-
-The connector is then registered with a call to
-:c:func:`drm_connector_init()` with a pointer to the connector
-functions and a connector type, and exposed through sysfs with a call to
-:c:func:`drm_connector_register()`.
-
-Supported connector types are
-
-- DRM_MODE_CONNECTOR_VGA
-- DRM_MODE_CONNECTOR_DVII
-- DRM_MODE_CONNECTOR_DVID
-- DRM_MODE_CONNECTOR_DVIA
-- DRM_MODE_CONNECTOR_Composite
-- DRM_MODE_CONNECTOR_SVIDEO
-- DRM_MODE_CONNECTOR_LVDS
-- DRM_MODE_CONNECTOR_Component
-- DRM_MODE_CONNECTOR_9PinDIN
-- DRM_MODE_CONNECTOR_DisplayPort
-- DRM_MODE_CONNECTOR_HDMIA
-- DRM_MODE_CONNECTOR_HDMIB
-- DRM_MODE_CONNECTOR_TV
-- DRM_MODE_CONNECTOR_eDP
-- DRM_MODE_CONNECTOR_VIRTUAL
-
-Connectors must be attached to an encoder to be used. For devices that
-map connectors to encoders 1:1, the connector should be attached at
-initialization time with a call to
-:c:func:`drm_mode_connector_attach_encoder()`. The driver must
-also set the :c:type:`struct drm_connector <drm_connector>`
-encoder field to point to the attached encoder.
-
-Finally, drivers must initialize the connectors state change detection
-with a call to :c:func:`drm_kms_helper_poll_init()`. If at least
-one connector is pollable but can't generate hotplug interrupts
-(indicated by the DRM_CONNECTOR_POLL_CONNECT and
-DRM_CONNECTOR_POLL_DISCONNECT connector flags), a delayed work will
-automatically be queued to periodically poll for changes. Connectors
-that can generate hotplug interrupts must be marked with the
-DRM_CONNECTOR_POLL_HPD flag instead, and their interrupt handler must
-call :c:func:`drm_helper_hpd_irq_event()`. The function will
-queue a delayed work to check the state of all connectors, but no
-periodic polling will be done.
-
-Connector Operations
-~~~~~~~~~~~~~~~~~~~~
-
- **Note**
-
- Unless otherwise state, all operations are mandatory.
-
-DPMS
-''''
-
-void (\*dpms)(struct drm_connector \*connector, int mode);
-The DPMS operation sets the power state of a connector. The mode
-argument is one of
-
-- DRM_MODE_DPMS_ON
-
-- DRM_MODE_DPMS_STANDBY
-
-- DRM_MODE_DPMS_SUSPEND
-
-- DRM_MODE_DPMS_OFF
-
-In all but DPMS_ON mode the encoder to which the connector is attached
-should put the display in low-power mode by driving its signals
-appropriately. If more than one connector is attached to the encoder
-care should be taken not to change the power state of other displays as
-a side effect. Low-power mode should be propagated to the encoders and
-CRTCs when all related connectors are put in low-power mode.
-
-Modes
-'''''
-
-int (\*fill_modes)(struct drm_connector \*connector, uint32_t
-max_width, uint32_t max_height);
-Fill the mode list with all supported modes for the connector. If the
-``max_width`` and ``max_height`` arguments are non-zero, the
-implementation must ignore all modes wider than ``max_width`` or higher
-than ``max_height``.
-
-The connector must also fill in this operation its display_info
-width_mm and height_mm fields with the connected display physical size
-in millimeters. The fields should be set to 0 if the value isn't known
-or is not applicable (for instance for projector devices).
-
-Connection Status
-'''''''''''''''''
-
-The connection status is updated through polling or hotplug events when
-supported (see ?). The status value is reported to userspace through
-ioctls and must not be used inside the driver, as it only gets
-initialized by a call to :c:func:`drm_mode_getconnector()` from
-userspace.
-
-enum drm_connector_status (\*detect)(struct drm_connector
-\*connector, bool force);
-Check to see if anything is attached to the connector. The ``force``
-parameter is set to false whilst polling or to true when checking the
-connector due to user request. ``force`` can be used by the driver to
-avoid expensive, destructive operations during automated probing.
-
-Return connector_status_connected if something is connected to the
-connector, connector_status_disconnected if nothing is connected and
-connector_status_unknown if the connection state isn't known.
-
-Drivers should only return connector_status_connected if the
-connection status has really been probed as connected. Connectors that
-can't detect the connection status, or failed connection status probes,
-should return connector_status_unknown.
-
Cleanup
-------
diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 99ece6758061..cedc3bc4e10b 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -27,6 +27,37 @@
#include "drm_crtc_internal.h"
#include "drm_internal.h"
+/**
+ * DOC: overview
+ *
+ * In DRM connectors are the general abstraction for display sinks, and include
+ * als fixed panels or anything else that can display pixels in some form. As
+ * opposed to all other KMS objects representing hardware (like CRTC, encoder or
+ * plane abstractions) connectors can be hotplugged and unplugged at runtime.
+ * Hence they are reference-counted using drm_connector_reference() and
+ * drm_connector_unreference().
+ *
+ * KMS driver must create, initialize, register and attach at a struct
+ * &drm_connector for each such sink. The instance is created as other KMS
+ * objects and initialized by setting the following fields.
+ *
+ * The connector is then registered with a call to drm_connector_init() with a
+ * pointer to the connector functions and a connector type, and exposed through
+ * sysfs with a call to drm_connector_register().
+ *
+ * Connectors must be attached to an encoder to be used. For devices that map
+ * connectors to encoders 1:1, the connector should be attached at
+ * initialization time with a call to drm_mode_connector_attach_encoder(). The
+ * driver must also set the struct &drm_connector encoder field to point to the
+ * attached encoder.
+ *
+ * For connectors which are not fixed (like built-in panels) the driver needs to
+ * support hotplug notifications. The simplest way to do that is by using the
+ * probe helpers, see drm_kms_helper_poll_init() for connectors which don't have
+ * hardware support for hotplug interrupts. Connectors with hardware hotplug
+ * support can instead use e.g. drm_helper_hpd_irq_event().
+ */
+
struct drm_conn_prop_enum_list {
int type;
const char *name;
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index ec2bea0b1b38..c9b275cd4085 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -42,9 +42,36 @@ enum drm_connector_force {
DRM_FORCE_ON_DIGITAL, /* for DVI-I use digital connector */
};
+/**
+ * enum drm_connector_status - status for a &drm_connector
+ *
+ * This enum is used to track the connector status. There are no separate
+ * #defines for the uapi!
+ */
enum drm_connector_status {
+ /**
+ * @connector_status_connected: The connector is definitely connected to
+ * a sink device, and can be enabled.
+ */
connector_status_connected = 1,
+ /**
+ * @connector_status_disconnected: The connector isn't connected to a
+ * sink device which can be autodetect. For digital outputs like DP or
+ * HDMI (which can be realiable probed) this means there's really
+ * nothing there. It is driver-dependent whether a connector with this
+ * status can be lit up or not.
+ */
connector_status_disconnected = 2,
+ /**
+ * @connector_status_unknown: The connector's status could not be
+ * reliably detected. This happens when probing would either cause
+ * flicker (like load-detection when the connector is in use), or when a
+ * hardware resource isn't available (like when load-detection needs a
+ * free CRTC). It should be possible to light up the connector with one
+ * of the listed fallback modes. For default configuration userspace
+ * should only try to light up connectors with unknown status when
+ * there's not connector with @connector_status_connected.
+ */
connector_status_unknown = 3,
};
@@ -416,11 +443,9 @@ struct drm_cmdline_mode {
* @modes: modes available on this connector (from fill_modes() + user)
* @status: one of the drm_connector_status enums (connected, not, or unknown)
* @probed_modes: list of modes derived directly from the display
- * @display_info: information about attached display (e.g. from EDID)
* @funcs: connector control functions
* @edid_blob_ptr: DRM property containing EDID if present
* @properties: property tracking for this connector
- * @polled: a DRM_CONNECTOR_POLL_<foo> value for core driven polling
* @dpms: current dpms state
* @helper_private: mid-layer private data
* @cmdline_mode: mode line parsed from the kernel cmdline for this connector
@@ -485,6 +510,13 @@ struct drm_connector {
/* these are modes added by probing with DDC or the BIOS */
struct list_head probed_modes;
+ /**
+ * @display_info: Display information is filled from EDID information
+ * when a display is detected. For non hot-pluggable displays such as
+ * flat panels in embedded systems, the driver should initialize the
+ * display_info.width_mm and display_info.height_mm fields with the
+ * physical size of the display.
+ */
struct drm_display_info display_info;
const struct drm_connector_funcs *funcs;
@@ -519,6 +551,25 @@ struct drm_connector {
/* DACs should rarely do this without a lot of testing */
#define DRM_CONNECTOR_POLL_DISCONNECT (1 << 2)
+ /**
+ * @polled:
+ *
+ * Connector polling mode, a combination of
+ *
+ * DRM_CONNECTOR_POLL_HPD
+ * The connector generates hotplug events and doesn't need to be
+ * periodically polled. The CONNECT and DISCONNECT flags must not
+ * be set together with the HPD flag.
+ *
+ * DRM_CONNECTOR_POLL_CONNECT
+ * Periodically poll the connector for connection.
+ *
+ * DRM_CONNECTOR_POLL_DISCONNECT
+ * Periodically poll the connector for disconnection.
+ *
+ * Set to 0 for connectors that don't support connection status
+ * discovery.
+ */
uint8_t polled; /* DRM_CONNECTOR_POLL_* */
/* requested DPMS state */
--
2.8.1
More information about the dri-devel
mailing list