[PATCH v5 8/8] drm/rockchip: Add dmc notifier in vop driver
Chanwoo Choi
cw00.choi at samsung.com
Wed Aug 10 05:07:39 UTC 2016
Hi Lin,
Looks good to me about the devfreq/devfreq-event usage.
[Usage of the devfreq/devfreq-event APIs]
Reviewed-by: Chanwoo Choi <cw00.choi at samsung.com>
Regards,
Chanwoo Choi
On 2016년 08월 10일 12:26, Lin Huang wrote:
> when in ddr frequency scaling process, vop can not do
> enable or disable operation, since dcf will base on vop vblank
> time to do frequency scaling and need to get vop irq if there
> have vop enabled. So need register to devfreq notifier, and we can
> get the dmc status. Also, when there have two vop enabled, we need
> to disable dmc, since dcf only base on one vop vblank time, so the
> other panel will flicker when do ddr frequency scaling.
>
> Signed-off-by: Lin Huang <hl at rock-chips.com>
> ---
> Changes in v5:
> - improve some nits
>
> Changes in v4:
> - register notifier to devfreq_register_notifier
> - use DEVFREQ_PRECHANGE and DEVFREQ_POSTCHANGE to get dmc status
> - when two vop enable, disable dmc
> - when two vop back to one vop, enable dmc
>
> Changes in v3:
> - when do vop eanble/disable, dmc will wait until it finish
>
> Changes in v2:
> - None
>
> Changes in v1:
> - use wait_event instead usleep
>
> drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 128 +++++++++++++++++++++++++++-
> 1 file changed, 125 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
> index 31744fe..7ce3890 100644
> --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
> +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
> @@ -12,6 +12,8 @@
> * GNU General Public License for more details.
> */
>
> +#include <linux/devfreq.h>
> +#include <linux/devfreq-event.h>
> #include <drm/drm.h>
> #include <drm/drmP.h>
> #include <drm/drm_atomic.h>
> @@ -118,6 +120,13 @@ struct vop {
>
> const struct vop_data *data;
>
> + struct devfreq *devfreq;
> + struct devfreq_event_dev *devfreq_event_dev;
> + struct notifier_block dmc_nb;
> + int dmc_in_process;
> + int vop_switch_status;
> + wait_queue_head_t wait_dmc_queue;
> + wait_queue_head_t wait_vop_switch_queue;
> uint32_t *regsbak;
> void __iomem *regs;
>
> @@ -428,21 +437,59 @@ static void vop_dsp_hold_valid_irq_disable(struct vop *vop)
> spin_unlock_irqrestore(&vop->irq_lock, flags);
> }
>
> +static int dmc_notify(struct notifier_block *nb, unsigned long event,
> + void *data)
> +{
> + struct vop *vop = container_of(nb, struct vop, dmc_nb);
> +
> + if (event == DEVFREQ_PRECHANGE) {
> + /*
> + * check if vop in enable or disable process,
> + * if yes, wait until it finishes, use 200ms as
> + * timeout.
> + */
> + if (!wait_event_timeout(vop->wait_vop_switch_queue,
> + !vop->vop_switch_status, HZ / 5))
> + dev_warn(vop->dev,
> + "Timeout waiting for vop swtich status\n");
> + vop->dmc_in_process = 1;
> + } else if (event == DEVFREQ_POSTCHANGE) {
> + vop->dmc_in_process = 0;
> + wake_up(&vop->wait_dmc_queue);
> + }
> +
> + return NOTIFY_OK;
> +}
> +
> static void vop_enable(struct drm_crtc *crtc)
> {
> struct vop *vop = to_vop(crtc);
> + int num_enabled_crtc = 0;
> int ret;
>
> + if (vop->is_enabled)
> + return;
> +
> + /*
> + * if in dmc scaling frequency process, wait until it finishes
> + * use 100ms as timeout time.
> + */
> + if (!wait_event_timeout(vop->wait_dmc_queue,
> + !vop->dmc_in_process, HZ / 5))
> + dev_warn(vop->dev,
> + "Timeout waiting for dmc when vop enable\n");
> +
> + vop->vop_switch_status = 1;
> ret = pm_runtime_get_sync(vop->dev);
> if (ret < 0) {
> dev_err(vop->dev, "failed to get pm runtime: %d\n", ret);
> - return;
> + goto err;
> }
>
> ret = clk_enable(vop->hclk);
> if (ret < 0) {
> dev_err(vop->dev, "failed to enable hclk - %d\n", ret);
> - return;
> + goto err;
> }
>
> ret = clk_enable(vop->dclk);
> @@ -456,7 +503,6 @@ static void vop_enable(struct drm_crtc *crtc)
> dev_err(vop->dev, "failed to enable aclk - %d\n", ret);
> goto err_disable_dclk;
> }
> -
> /*
> * Slave iommu shares power, irq and clock with vop. It was associated
> * automatically with this master device via common driver code.
> @@ -485,6 +531,21 @@ static void vop_enable(struct drm_crtc *crtc)
>
> drm_crtc_vblank_on(crtc);
>
> + vop->vop_switch_status = 0;
> + wake_up(&vop->wait_vop_switch_queue);
> +
> + /* check how many vop we use now */
> + drm_for_each_crtc(crtc, vop->drm_dev) {
> + if (crtc->state->enable)
> + num_enabled_crtc++;
> + }
> +
> + /* if enable two vop, need to disable dmc */
> + if ((num_enabled_crtc > 1) && vop->devfreq) {
> + if (vop->devfreq_event_dev)
> + devfreq_event_disable_edev(vop->devfreq_event_dev);
> + devfreq_suspend_device(vop->devfreq);
> + }
> return;
>
> err_disable_aclk:
> @@ -493,16 +554,32 @@ err_disable_dclk:
> clk_disable(vop->dclk);
> err_disable_hclk:
> clk_disable(vop->hclk);
> +err:
> + vop->vop_switch_status = 0;
> + wake_up(&vop->wait_vop_switch_queue);
> + return;
> }
>
> static void vop_crtc_disable(struct drm_crtc *crtc)
> {
> struct vop *vop = to_vop(crtc);
> + int num_enabled_crtc = 0;
> int i;
>
> WARN_ON(vop->event);
>
> /*
> + * if in dmc scaling frequency process, wait until it finish
> + * use 100ms as timeout time.
> + */
> + if (!wait_event_timeout(vop->wait_dmc_queue,
> + !vop->dmc_in_process, HZ / 5))
> + dev_warn(vop->dev,
> + "Timeout waiting for dmc when vop disable\n");
> +
> + vop->vop_switch_status = 1;
> +
> + /*
> * We need to make sure that all windows are disabled before we
> * disable that crtc. Otherwise we might try to scan from a destroyed
> * buffer later.
> @@ -559,6 +636,25 @@ static void vop_crtc_disable(struct drm_crtc *crtc)
>
> crtc->state->event = NULL;
> }
> +
> + vop->vop_switch_status = 0;
> + wake_up(&vop->wait_vop_switch_queue);
> +
> + /* check how many vop use now */
> + drm_for_each_crtc(crtc, vop->drm_dev) {
> + if (crtc->state->enable)
> + num_enabled_crtc++;
> + }
> +
> + /*
> + * if num_enabled_crtc = 1 now, it means 2 vop enabled
> + * change to 1 vop enabled need to enable dmc again.
> + */
> + if ((num_enabled_crtc == 1) && vop->devfreq) {
> + if (vop->devfreq_event_dev)
> + devfreq_event_enable_edev(vop->devfreq_event_dev);
> + devfreq_resume_device(vop->devfreq);
> + }
> }
>
> static void vop_plane_destroy(struct drm_plane *plane)
> @@ -1406,6 +1502,8 @@ static int vop_bind(struct device *dev, struct device *master, void *data)
> struct drm_device *drm_dev = data;
> struct vop *vop;
> struct resource *res;
> + struct devfreq *devfreq;
> + struct devfreq_event_dev *event_dev;
> size_t alloc_size;
> int ret, irq;
>
> @@ -1467,6 +1565,30 @@ static int vop_bind(struct device *dev, struct device *master, void *data)
> return ret;
>
> pm_runtime_enable(&pdev->dev);
> +
> + vop->psr_enabled = false;
> + INIT_DELAYED_WORK(&vop->psr_work, vop_psr_work);
> +
> + init_waitqueue_head(&vop->wait_vop_switch_queue);
> + vop->vop_switch_status = 0;
> + init_waitqueue_head(&vop->wait_dmc_queue);
> + vop->dmc_in_process = 0;
> +
> + devfreq = devfreq_get_devfreq_by_phandle(dev, 0);
> + if (IS_ERR(devfreq))
> + goto out;
> +
> + vop->devfreq = devfreq;
> + vop->dmc_nb.notifier_call = dmc_notify;
> + devfreq_register_notifier(vop->devfreq, &vop->dmc_nb,
> + DEVFREQ_TRANSITION_NOTIFIER);
> +
> + event_dev = devfreq_event_get_edev_by_phandle(vop->devfreq->dev.parent,
> + 0);
> + if (IS_ERR(event_dev))
> + goto out;
> + vop->devfreq_event_dev = event_dev;
> +out:
> return 0;
> }
>
>
More information about the dri-devel
mailing list