[PATCH V5 3/4] drm/bridge: Add driver for GE B850v3 LVDS/DP++ Bridge
Archit Taneja
architt at codeaurora.org
Tue Aug 16 04:15:36 UTC 2016
Hi,
On 08/09/2016 10:11 PM, Peter Senna Tschudin wrote:
> Add a driver that create a drm_bridge and a drm_connector for the LVDS
> to DP++ display bridge of the GE B850v3.
>
> There are two physical bridges on the video signal pipeline: a
> STDP4028(LVDS to DP) and a STDP2690(DP to DP++). The hardware and
> firmware made it complicated for this binding to comprise two device
> tree nodes, as the design goal is to configure both bridges based on
> the LVDS signal, which leave the driver powerless to control the video
> processing pipeline. The two bridges behaves as a single bridge, and
> the driver is only needed for telling the host about EDID / HPD, and
> for giving the host powers to ack interrupts. The video signal pipeline
> is as follows:
>
> Host -> LVDS|--(STDP4028)--|DP -> DP|--(STDP2690)--|DP++ -> Video output
>
I'd commented on an earlier revision (v2) of this patch, but hadn't got
a response on it. Pasting the query again:
Are these two chips always expected to be used together? I don't think
it's right to pair up two encoder chips into one driver just for one
board.
Is one device @0x72 and other @0x73? Or is only one of them an i2c
slave?
What's preventing us to create these as two different bridge drivers?
The drm framework allows us to daisy chain encoder bridges. The only
problem I see is that we don't have a clear-cut way to tell the bridge
driver whether we want it to create a connector for us or not. Because,
it looks like both can potentially create connectors. This isn't a big
problem either if we have DT. We just need to check whether our output
port is connected to another bridge or a connector.
Thanks,
Archit
> Cc: Martyn Welch <martyn.welch at collabora.co.uk>
> Cc: Martin Donnelly <martin.donnelly at ge.com>
> Cc: Daniel Vetter <daniel.vetter at ffwll.ch>
> Cc: Enric Balletbo i Serra <enric.balletbo at collabora.com>
> Cc: Philipp Zabel <p.zabel at pengutronix.de>
> Cc: Rob Herring <robh at kernel.org>
> Cc: Fabio Estevam <fabio.estevam at nxp.com>
> CC: David Airlie <airlied at linux.ie>
> CC: Thierry Reding <treding at nvidia.com>
> CC: Thierry Reding <thierry.reding at gmail.com>
> Reviewed-by: Enric Balletbo <enric.balletbo at collabora.com>
> Signed-off-by: Peter Senna Tschudin <peter.senna at collabora.com>
> ---
> Changes from V4:
> - Check the output of the first call to i2c_smbus_write_word_data() and return
> it's error code for failing gracefully on i2c issues
> - Renamed the i2c_driver.name from "ge,b850v3-lvds-dp" to "b850v3-lvds-dp" to
> remove the comma from the driver name
>
> Changes from V3:
> - 3/4 instead of 4/5
> - Tested on next-20160804
>
> Changes from V2:
> - Made it atomic to be applied on next-20160729 on top of Liu Ying changes
> that made imx-ldb atomic
>
> Changes from V1:
> - New commit message
> - Removed 3 empty entry points
> - Removed memory leak from ge_b850v3_lvds_dp_get_modes()
> - Added a lock for mode setting
> - Removed a few blank lines
> - Changed the order at Makefile and Kconfig
>
> MAINTAINERS | 8 +
> drivers/gpu/drm/bridge/Kconfig | 11 +
> drivers/gpu/drm/bridge/Makefile | 1 +
> drivers/gpu/drm/bridge/ge_b850v3_lvds_dp.c | 405 +++++++++++++++++++++++++++++
> 4 files changed, 425 insertions(+)
> create mode 100644 drivers/gpu/drm/bridge/ge_b850v3_lvds_dp.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index a306795..e8d106a 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -5142,6 +5142,14 @@ W: https://linuxtv.org
> S: Maintained
> F: drivers/media/radio/radio-gemtek*
>
> +GENERAL ELECTRIC B850V3 LVDS/DP++ BRIDGE
> +M: Peter Senna Tschudin <peter.senna at collabora.com>
> +M: Martin Donnelly <martin.donnelly at ge.com>
> +M: Martyn Welch <martyn.welch at collabora.co.uk>
> +S: Maintained
> +F: drivers/gpu/drm/bridge/ge_b850v3_dp2.c
> +F: Documentation/devicetree/bindings/ge/b850v3_dp2_bridge.txt
> +
> GENERIC GPIO I2C DRIVER
> M: Haavard Skinnemoen <hskinnemoen at gmail.com>
> S: Supported
> diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
> index b590e67..b4b70fb 100644
> --- a/drivers/gpu/drm/bridge/Kconfig
> +++ b/drivers/gpu/drm/bridge/Kconfig
> @@ -32,6 +32,17 @@ config DRM_DW_HDMI_AHB_AUDIO
> Designware HDMI block. This is used in conjunction with
> the i.MX6 HDMI driver.
>
> +config DRM_GE_B850V3_LVDS_DP
> + tristate "GE B850v3 LVDS to DP++ display bridge"
> + depends on OF
> + select DRM_KMS_HELPER
> + select DRM_PANEL
> + ---help---
> + This is a driver for the display bridge of
> + GE B850v3 that convert dual channel LVDS
> + to DP++. This is used with the i.MX6 imx-ldb
> + driver.
> +
> config DRM_NXP_PTN3460
> tristate "NXP PTN3460 DP/LVDS bridge"
> depends on OF
> diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
> index efdb07e..b9606f3 100644
> --- a/drivers/gpu/drm/bridge/Makefile
> +++ b/drivers/gpu/drm/bridge/Makefile
> @@ -3,6 +3,7 @@ ccflags-y := -Iinclude/drm
> obj-$(CONFIG_DRM_ANALOGIX_ANX78XX) += analogix-anx78xx.o
> obj-$(CONFIG_DRM_DW_HDMI) += dw-hdmi.o
> obj-$(CONFIG_DRM_DW_HDMI_AHB_AUDIO) += dw-hdmi-ahb-audio.o
> +obj-$(CONFIG_DRM_GE_B850V3_LVDS_DP) += ge_b850v3_lvds_dp.o
> obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o
> obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o
> obj-$(CONFIG_DRM_SII902X) += sii902x.o
> diff --git a/drivers/gpu/drm/bridge/ge_b850v3_lvds_dp.c b/drivers/gpu/drm/bridge/ge_b850v3_lvds_dp.c
> new file mode 100644
> index 0000000..81e9279
> --- /dev/null
> +++ b/drivers/gpu/drm/bridge/ge_b850v3_lvds_dp.c
> @@ -0,0 +1,405 @@
> +/*
> + * Driver for GE B850v3 DP display bridge
> +
> + * Copyright (c) 2016, Collabora Ltd.
> + * Copyright (c) 2016, General Electric Company
> +
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> +
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> +
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> +
> + * This driver creates a drm_bridge and a drm_connector for the LVDS to DP++
> + * display bridge of the GE B850v3. There are two physical bridges on the video
> + * signal pipeline: a STDP4028(LVDS to DP) and a STDP2690(DP to DP++). However
> + * the physical bridges are automatically configured by the input video signal,
> + * and the driver has no access to the video processing pipeline. The driver is
> + * only needed to read EDID from the STDP2690 and to handle HPD events from the
> + * STDP4028. The driver communicates with both bridges over i2c. The video
> + * signal pipeline is as follows:
> + *
> + * Host -> LVDS|--(STDP4028)--|DP -> DP|--(STDP2690)--|DP++ -> Video output
> + *
> + */
> +
> +#include <linux/gpio.h>
> +#include <linux/i2c.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <drm/drm_atomic.h>
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_crtc_helper.h>
> +#include <drm/drm_edid.h>
> +#include <drm/drmP.h>
> +
> +/*
> + * 220Mhz is a limitation of the host, as the bridge is capable of up to
> + * 330Mhz. See section 9.2.1.2.4 of the i.MX 6Dual/6Quad Applications
> + * Processor Reference Manual for more information about the 220Mhz limit.
> + * The imx-ldb driver will warn about clocks over 170Mhz, but it seem to work
> + * fine.
> + */
> +#define MAX_PIXEL_CLOCK 220000
> +
> +#define EDID_EXT_BLOCK_CNT 0x7E
> +
> +#define STDP4028_IRQ_OUT_CONF_REG 0x02
> +#define STDP4028_DPTX_IRQ_EN_REG 0x3C
> +#define STDP4028_DPTX_IRQ_STS_REG 0x3D
> +#define STDP4028_DPTX_STS_REG 0x3E
> +
> +#define STDP4028_DPTX_DP_IRQ_EN 0x1000
> +
> +#define STDP4028_DPTX_HOTPLUG_IRQ_EN 0x0400
> +#define STDP4028_DPTX_LINK_CH_IRQ_EN 0x2000
> +#define STDP4028_DPTX_IRQ_CONFIG \
> + (STDP4028_DPTX_LINK_CH_IRQ_EN | STDP4028_DPTX_HOTPLUG_IRQ_EN)
> +
> +#define STDP4028_DPTX_HOTPLUG_STS 0x0200
> +#define STDP4028_DPTX_LINK_STS 0x1000
> +#define STDP4028_CON_STATE_CONNECTED \
> + (STDP4028_DPTX_HOTPLUG_STS | STDP4028_DPTX_LINK_STS)
> +
> +#define STDP4028_DPTX_HOTPLUG_CH_STS 0x0400
> +#define STDP4028_DPTX_LINK_CH_STS 0x2000
> +#define STDP4028_DPTX_IRQ_CLEAR \
> + (STDP4028_DPTX_LINK_CH_STS | STDP4028_DPTX_HOTPLUG_CH_STS)
> +
> +struct ge_b850v3_lvds_dp {
> + struct drm_connector connector;
> + struct drm_bridge bridge;
> + struct i2c_client *ge_b850v3_lvds_dp_i2c;
> + struct i2c_client *edid_i2c;
> + struct edid *edid;
> + struct mutex lock;
> +};
> +
> +static inline struct ge_b850v3_lvds_dp *
> + bridge_to_ge_b850v3_lvds_dp(struct drm_bridge *bridge)
> +{
> + return container_of(bridge, struct ge_b850v3_lvds_dp, bridge);
> +}
> +
> +static inline struct ge_b850v3_lvds_dp *
> + connector_to_ge_b850v3_lvds_dp(struct drm_connector *connector)
> +{
> + return container_of(connector, struct ge_b850v3_lvds_dp, connector);
> +}
> +
> +u8 *stdp2690_get_edid(struct i2c_client *client)
> +{
> + struct i2c_adapter *adapter = client->adapter;
> + unsigned char start = 0x00;
> + unsigned int total_size;
> + u8 *block = kmalloc(EDID_LENGTH, GFP_KERNEL);
> +
> + struct i2c_msg msgs[] = {
> + {
> + .addr = client->addr,
> + .flags = 0,
> + .len = 1,
> + .buf = &start,
> + }, {
> + .addr = client->addr,
> + .flags = I2C_M_RD,
> + .len = EDID_LENGTH,
> + .buf = block,
> + }
> + };
> +
> + if (!block)
> + return NULL;
> +
> + if (i2c_transfer(adapter, msgs, 2) != 2) {
> + DRM_ERROR("Unable to read EDID.\n");
> + goto err;
> + }
> +
> + if (!drm_edid_block_valid(block, 0, false, NULL)) {
> + DRM_ERROR("Invalid EDID block\n");
> + goto err;
> + }
> +
> + total_size = (block[EDID_EXT_BLOCK_CNT] + 1) * EDID_LENGTH;
> + if (total_size > EDID_LENGTH) {
> + kfree(block);
> + block = kmalloc(total_size, GFP_KERNEL);
> + if (!block)
> + return NULL;
> +
> + /* Yes, read the entire buffer, and do not skip the first
> + * EDID_LENGTH bytes.
> + */
> + start = 0x00;
> + msgs[1].len = total_size;
> + msgs[1].buf = block;
> +
> + if (i2c_transfer(adapter, msgs, 2) != 2) {
> + DRM_ERROR("Unable to read EDID extension blocks.\n");
> + goto err;
> + }
> + }
> +
> + return block;
> +
> +err:
> + kfree(block);
> + return NULL;
> +}
> +
> +static int ge_b850v3_lvds_dp_get_modes(struct drm_connector *connector)
> +{
> + struct ge_b850v3_lvds_dp *ptn_bridge;
> + struct i2c_client *client;
> + int num_modes = 0;
> +
> + ptn_bridge = connector_to_ge_b850v3_lvds_dp(connector);
> + client = ptn_bridge->edid_i2c;
> +
> + mutex_lock(&ptn_bridge->lock);
> +
> + kfree(ptn_bridge->edid);
> + ptn_bridge->edid = (struct edid *) stdp2690_get_edid(client);
> +
> + if (ptn_bridge->edid) {
> + drm_mode_connector_update_edid_property(connector,
> + ptn_bridge->edid);
> + num_modes = drm_add_edid_modes(connector, ptn_bridge->edid);
> + }
> +
> + mutex_unlock(&ptn_bridge->lock);
> +
> + return num_modes;
> +}
> +
> +
> +static enum drm_mode_status ge_b850v3_lvds_dp_mode_valid(
> + struct drm_connector *connector, struct drm_display_mode *mode)
> +{
> + if (mode->clock > MAX_PIXEL_CLOCK) {
> + DRM_INFO("The pixel clock for the mode %s is too high, and not supported.",
> + mode->name);
> + return MODE_CLOCK_HIGH;
> + }
> +
> + return MODE_OK;
> +}
> +
> +static const struct
> +drm_connector_helper_funcs ge_b850v3_lvds_dp_connector_helper_funcs = {
> + .get_modes = ge_b850v3_lvds_dp_get_modes,
> + .mode_valid = ge_b850v3_lvds_dp_mode_valid,
> +};
> +
> +static enum drm_connector_status ge_b850v3_lvds_dp_detect(
> + struct drm_connector *connector, bool force)
> +{
> + struct ge_b850v3_lvds_dp *ptn_bridge =
> + connector_to_ge_b850v3_lvds_dp(connector);
> + struct i2c_client *ge_b850v3_lvds_dp_i2c =
> + ptn_bridge->ge_b850v3_lvds_dp_i2c;
> + s32 link_state;
> +
> + link_state = i2c_smbus_read_word_data(ge_b850v3_lvds_dp_i2c,
> + STDP4028_DPTX_STS_REG);
> +
> + if (link_state == STDP4028_CON_STATE_CONNECTED)
> + return connector_status_connected;
> +
> + if (link_state == 0)
> + return connector_status_disconnected;
> +
> + return connector_status_unknown;
> +}
> +
> +static const struct drm_connector_funcs ge_b850v3_lvds_dp_connector_funcs = {
> + .dpms = drm_atomic_helper_connector_dpms,
> + .fill_modes = drm_helper_probe_single_connector_modes,
> + .detect = ge_b850v3_lvds_dp_detect,
> + .destroy = drm_connector_cleanup,
> + .reset = drm_atomic_helper_connector_reset,
> + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
> + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
> +};
> +
> +static irqreturn_t ge_b850v3_lvds_dp_irq_handler(int irq, void *dev_id)
> +{
> + struct ge_b850v3_lvds_dp *ptn_bridge = dev_id;
> + struct i2c_client *ge_b850v3_lvds_dp_i2c
> + = ptn_bridge->ge_b850v3_lvds_dp_i2c;
> +
> + mutex_lock(&ptn_bridge->lock);
> +
> + i2c_smbus_write_word_data(ge_b850v3_lvds_dp_i2c,
> + STDP4028_DPTX_IRQ_STS_REG, STDP4028_DPTX_IRQ_CLEAR);
> +
> + mutex_unlock(&ptn_bridge->lock);
> +
> + if (ptn_bridge->connector.dev)
> + drm_kms_helper_hotplug_event(ptn_bridge->connector.dev);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int ge_b850v3_lvds_dp_attach(struct drm_bridge *bridge)
> +{
> + struct ge_b850v3_lvds_dp *ptn_bridge
> + = bridge_to_ge_b850v3_lvds_dp(bridge);
> + struct drm_connector *connector = &ptn_bridge->connector;
> + struct i2c_client *ge_b850v3_lvds_dp_i2c
> + = ptn_bridge->ge_b850v3_lvds_dp_i2c;
> + int ret;
> +
> + if (!bridge->encoder) {
> + DRM_ERROR("Parent encoder object not found");
> + return -ENODEV;
> + }
> +
> + connector->polled = DRM_CONNECTOR_POLL_HPD;
> +
> + drm_connector_helper_add(connector,
> + &ge_b850v3_lvds_dp_connector_helper_funcs);
> +
> + ret = drm_connector_init(bridge->dev, connector,
> + &ge_b850v3_lvds_dp_connector_funcs,
> + DRM_MODE_CONNECTOR_DisplayPort);
> + if (ret) {
> + DRM_ERROR("Failed to initialize connector with drm\n");
> + return ret;
> + }
> +
> + drm_connector_register(connector);
> + ret = drm_mode_connector_attach_encoder(connector, bridge->encoder);
> + if (ret)
> + return ret;
> +
> + drm_bridge_enable(bridge);
> + if (ge_b850v3_lvds_dp_i2c->irq) {
> + drm_helper_hpd_irq_event(connector->dev);
> +
> + ret = devm_request_threaded_irq(&ge_b850v3_lvds_dp_i2c->dev,
> + ge_b850v3_lvds_dp_i2c->irq, NULL,
> + ge_b850v3_lvds_dp_irq_handler,
> + IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
> + "ge-b850v3-lvds-dp", ptn_bridge);
> + if (ret)
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static const struct drm_bridge_funcs ge_b850v3_lvds_dp_funcs = {
> + .attach = ge_b850v3_lvds_dp_attach,
> +};
> +
> +static int ge_b850v3_lvds_dp_probe(struct i2c_client *ge_b850v3_lvds_dp_i2c,
> + const struct i2c_device_id *id)
> +{
> + struct device *dev = &ge_b850v3_lvds_dp_i2c->dev;
> + struct ge_b850v3_lvds_dp *ptn_bridge;
> + int ret;
> + u32 edid_i2c_reg;
> +
> + ptn_bridge = devm_kzalloc(dev, sizeof(*ptn_bridge), GFP_KERNEL);
> + if (!ptn_bridge)
> + return -ENOMEM;
> +
> + mutex_init(&ptn_bridge->lock);
> +
> + ptn_bridge->ge_b850v3_lvds_dp_i2c = ge_b850v3_lvds_dp_i2c;
> + ptn_bridge->bridge.driver_private = ptn_bridge;
> + i2c_set_clientdata(ge_b850v3_lvds_dp_i2c, ptn_bridge);
> +
> + ret = of_property_read_u32(dev->of_node, "edid-reg", &edid_i2c_reg);
> + if (ret) {
> + dev_err(dev, "edid-reg not specified, aborting...\n");
> + return -ENODEV;
> + }
> +
> + ptn_bridge->edid_i2c = devm_kzalloc(dev,
> + sizeof(struct i2c_client), GFP_KERNEL);
> +
> + if (!ptn_bridge->edid_i2c)
> + return -ENOMEM;
> +
> + memcpy(ptn_bridge->edid_i2c, ge_b850v3_lvds_dp_i2c,
> + sizeof(struct i2c_client));
> +
> + ptn_bridge->edid_i2c->addr = (unsigned short) edid_i2c_reg;
> +
> + /*
> + * Configures the bridge to re-enable interrupts after each ack. As
> + * this is the first communication with the chip, fail on error.
> + */
> + ret = i2c_smbus_write_word_data(ge_b850v3_lvds_dp_i2c,
> + STDP4028_IRQ_OUT_CONF_REG, STDP4028_DPTX_DP_IRQ_EN);
> + if (ret) {
> + dev_err(dev, "i2c communication failed, aborting...\n");
> + return ret;
> + }
> +
> + i2c_smbus_write_word_data(ge_b850v3_lvds_dp_i2c,
> + STDP4028_DPTX_IRQ_EN_REG, STDP4028_DPTX_IRQ_CONFIG);
> +
> + /* Clear pending interrupts since power up. */
> + i2c_smbus_write_word_data(ge_b850v3_lvds_dp_i2c,
> + STDP4028_DPTX_IRQ_STS_REG, STDP4028_DPTX_IRQ_CLEAR);
> +
> + ptn_bridge->bridge.funcs = &ge_b850v3_lvds_dp_funcs;
> + ptn_bridge->bridge.of_node = dev->of_node;
> + ret = drm_bridge_add(&ptn_bridge->bridge);
> + if (ret) {
> + DRM_ERROR("Failed to add bridge\n");
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int ge_b850v3_lvds_dp_remove(struct i2c_client *ge_b850v3_lvds_dp_i2c)
> +{
> + struct ge_b850v3_lvds_dp *ptn_bridge =
> + i2c_get_clientdata(ge_b850v3_lvds_dp_i2c);
> +
> + drm_bridge_remove(&ptn_bridge->bridge);
> +
> + kfree(ptn_bridge->edid);
> +
> + return 0;
> +}
> +
> +static const struct i2c_device_id ge_b850v3_lvds_dp_i2c_table[] = {
> + {"b850v3-lvds-dp", 0},
> + {},
> +};
> +MODULE_DEVICE_TABLE(i2c, ge_b850v3_lvds_dp_i2c_table);
> +
> +static const struct of_device_id ge_b850v3_lvds_dp_match[] = {
> + { .compatible = "ge,b850v3-lvds-dp" },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, ge_b850v3_lvds_dp_match);
> +
> +static struct i2c_driver ge_b850v3_lvds_dp_driver = {
> + .id_table = ge_b850v3_lvds_dp_i2c_table,
> + .probe = ge_b850v3_lvds_dp_probe,
> + .remove = ge_b850v3_lvds_dp_remove,
> + .driver = {
> + .name = "b850v3-lvds-dp",
> + .of_match_table = ge_b850v3_lvds_dp_match,
> + },
> +};
> +module_i2c_driver(ge_b850v3_lvds_dp_driver);
> +
> +MODULE_AUTHOR("Peter Senna Tschudin <peter.senna at collabora.com>");
> +MODULE_AUTHOR("Martyn Welch <martyn.welch at collabora.co.uk>");
> +MODULE_DESCRIPTION("GE LVDS to DP++ display bridge)");
> +MODULE_LICENSE("GPL v2");
>
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
More information about the dri-devel
mailing list