[PATCH v2 0/4] Picture aspect ratio support in DRM layer

Jose Abreu Jose.Abreu at synopsys.com
Thu Aug 18 14:52:17 UTC 2016


Hi,


On 09-08-2016 15:55, Shashank Sharma wrote:
> This patch series adds 4 patches.
> - The first two patches add aspect ratio support in DRM layes
> - Next two patches add new aspect ratios defined in CEA-861-F
>   supported for HDMI 2.0 4k modes.
>
> Adding aspect ratio support in DRM layer:
> - The CEA videmodes contain aspect ratio information, which we
>   parse when we read the modes from EDID. But while transforming
>   user_mode to kernel_mode or viceversa, DRM layer lose this
>   information.
> - HDMI compliance testing for CEA modes, expects the AVI info frames
>   to contain exact VIC no for the 'video mode under test'. Now CEA
>   modes have different VIC for same modes but different aspect ratio
>   for example:
>         VIC 2 = 720x480 at 60 4:3
>         VIC 3 = 720x480 at 60 16:9
>   In this way, lack of aspect ratio information, can cause wrong VIC
>   no in AVI IF, causing HDMI complaince test to fail.
> - This patch set adds code, which embeds the aspect ratio information
>   also in DRM video mode flags, and uses it while comparing two modes.
>
> Adding new aspect ratios for HDMI 2.0
> - CEA-861-F defines two new aspect ratios, to be used for 4k HDMI 2.0
>   modes.
>         - 64:27
>         - 256:135
> Last two patches in the series, adds code to handle these new
> aspect ratios.
>
> V2: Fixed review comments from Sean, Emil, Daniel 
>
> Shashank Sharma (4):
>   drm: add picture aspect ratio flags
>   drm: Add aspect ratio parsing in DRM layer
>   video: Add new aspect ratios for HDMI 2.0
>   drm: Add and handle new aspect ratios in DRM layer

I am using these patches to run HDMI 2.0 compliance so:

Tested-by: Jose Abreu <joabreu at synopsys.com>

I also have code ready that does the EDID parsing of HDMI 2.0
blocks (HF-VSDB, 4:2:0 VDB and 4:2:0 VCB). The code was tested
and validated against bridge driver dw-hdmi resorting to HDMI
compliance equipment. Besides the parsing I also added support
for YCbCr 4:2:0 encoding. Still, to send the patches I need this
series to get accepted first.

>
>  drivers/gpu/drm/drm_modes.c | 43 +++++++++++++++++++++++++++++++++++++++++++
>  drivers/video/hdmi.c        |  4 ++++
>  include/linux/hdmi.h        |  2 ++
>  include/uapi/drm/drm_mode.h | 24 +++++++++++++++++++-----
>  4 files changed, 68 insertions(+), 5 deletions(-)
>

Best regards,
Jose Miguel Abreu


More information about the dri-devel mailing list