[PATCH 05/18] drm/etnaviv: move linear window setup into etnaviv_iommuv1_restore

[Lucas Stach]

It is only relevant for the V1 MMU, so we should not do this in the
common code.

Signed-off-by: Lucas Stach <l.stach at pengutronix.de>
---
 drivers/gpu/drm/etnaviv/etnaviv_gpu.c   | 9 +--------
 drivers/gpu/drm/etnaviv/etnaviv_iommu.c | 7 +++++++
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
index f18857e07b8f..988b59f66569 100644
--- a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
+++ b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
@@ -568,14 +568,7 @@ static void etnaviv_gpu_hw_init(struct etnaviv_gpu *gpu)
 		gpu_write(gpu, VIVS_MC_BUS_CONFIG, bus_config);
 	}
 
-	/* set base addresses */
-	gpu_write(gpu, VIVS_MC_MEMORY_BASE_ADDR_RA, gpu->memory_base);
-	gpu_write(gpu, VIVS_MC_MEMORY_BASE_ADDR_FE, gpu->memory_base);
-	gpu_write(gpu, VIVS_MC_MEMORY_BASE_ADDR_TX, gpu->memory_base);
-	gpu_write(gpu, VIVS_MC_MEMORY_BASE_ADDR_PEZ, gpu->memory_base);
-	gpu_write(gpu, VIVS_MC_MEMORY_BASE_ADDR_PE, gpu->memory_base);
-
-	/* setup the MMU page table pointers */
+	/* setup the MMU */
 	etnaviv_iommuv1_restore(gpu);
 
 	/* Start command processor */
diff --git a/drivers/gpu/drm/etnaviv/etnaviv_iommu.c b/drivers/gpu/drm/etnaviv/etnaviv_iommu.c
index 35f365f50e18..912a290a4e9c 100644
--- a/drivers/gpu/drm/etnaviv/etnaviv_iommu.c
+++ b/drivers/gpu/drm/etnaviv/etnaviv_iommu.c
@@ -202,6 +202,13 @@ void etnaviv_iommuv1_restore(struct etnaviv_gpu *gpu)
 			to_etnaviv_domain(gpu->mmu->domain);
 	u32 pgtable;
 
+	/* set base addresses */
+	gpu_write(gpu, VIVS_MC_MEMORY_BASE_ADDR_RA, gpu->memory_base);
+	gpu_write(gpu, VIVS_MC_MEMORY_BASE_ADDR_FE, gpu->memory_base);
+	gpu_write(gpu, VIVS_MC_MEMORY_BASE_ADDR_TX, gpu->memory_base);
+	gpu_write(gpu, VIVS_MC_MEMORY_BASE_ADDR_PEZ, gpu->memory_base);
+	gpu_write(gpu, VIVS_MC_MEMORY_BASE_ADDR_PE, gpu->memory_base);
+
 	/* set page table address in MC */
 	pgtable = (u32)etnaviv_domain->pgtable.paddr;
 
-- 
2.8.1