[RESEND] [PATCH v2 2/4] dt-bindings: Add jdi lt070me05000 panel bindings

[Thierry Reding]

On Wed, Aug 24, 2016 at 05:53:00PM +0530, Vinay Simha wrote:
> if we do not set the polarity to 8mA, panel will have gibberish display.
> (information to set 8mA is available only in
> nexus7-msm-flo-3.4-lollipop-release_dsi kernel nx7 release)
> 
> i will add this
> reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>;

I don't think that will work with the current driver, because the GPIO
subsystem will automatically invert the value for you. Currently the
panel driver sets the GPIO value to 0 to assert the reset. With the
GPIO_ACTIVE_LOW flag you'd end up setting the actual level of the GPIO
to high, which is going to deassert. So I think if you make the above
change (which I think is the right thing to do), you'll also have to
update the driver to use high-active logic.

Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20160824/7fc273d3/attachment-0001.sig>